Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
TSC-ZEM3S6.5
Part Number
|
---|
TSC-ZEM3S6.5 |
Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Figure | |
---|---|---|---|---|---|---|---|---|---|
87.60 € | 1 | Available | 5 Days | 6.5 | 16 | 6 | 70 | 3 |
Loading...
Model Number | Flute Length ℓ |
Overall Length L |
Shank Diameter d |
Figure | |
Outer Diameter D |
|||||
TSC-ZEM3S | 3 | 8 | 50 | 6 | 1 |
3.3 | 8 | 50 | 6 | 1 | |
3.5 | 10 | 50 | 6 | 1 | |
4 | 11 | 50 | 6 | 1 | |
4.2 | 11 | 50 | 6 | 1 | |
4.5 | 11 | 50 | 6 | 1 | |
5 | 13 | 60 | 6 | 1 | |
5.5 | 13 | 60 | 6 | 1 | |
6 | 13 | 60 | 6 | 2 | |
6.5 | 16 | 70 | 6 | 3 | |
6.8 | 16 | 70 | 6 | 3 | |
7 | 16 | 70 | 6 | 3 | |
7.1 | 16 | 70 | 6 | 3 | |
7.2 | 16 | 70 | 6 | 3 | |
7.3 | 16 | 70 | 6 | 3 | |
7.4 | 16 | 70 | 6 | 3 | |
7.5 | 16 | 70 | 6 | 3 | |
7.6 | 16 | 70 | 6 | 3 | |
7.7 | 16 | 70 | 6 | 3 | |
7.8 | 16 | 70 | 6 | 3 | |
7.9 | 16 | 70 | 6 | 3 | |
8 | 19 | 70 | 8 | 2 | |
8.5 | 19 | 80 | 8 | 3 | |
9 | 19 | 80 | 8 | 3 | |
9.5 | 19 | 80 | 8 | 3 | |
10 | 22 | 80 | 10 | 2 | |
10.3 | 22 | 80 | 10 | 3 | |
10.5 | 22 | 90 | 10 | 3 | |
11 | 22 | 90 | 10 | 3 | |
11.5 | 22 | 90 | 10 | 3 | |
12 | 22 | 90 | 12 | 2 | |
12.5 | 22 | 85 | 12 | 3 | |
13 | 26 | 85 | 12 | 3 | |
14 | 26 | 85 | 12 | 3 | |
15 |
26 | 105 | 12 | 3 | |
16 | 32 | 110 | 16 | 2 |
For Cutting Conditions, Refer to >>Click here.
● It achieves an effect similar to a reamer by leaving a round land width (the width of the cylindrical part of the peripheral blade without neck relief), increasing the surface machining accuracy.
● The bottom blade is nearly flat, ideal for finishing countersunk holes.
● It has a 3-flute blade shape that suppresses the chatter that tends to result from hole drilling and countersunk hole machining.
Work Material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Stainless Steel / Cast Iron / Aluminum Alloy | Number of Flutes(sheet) | 3 | Model | Square |
---|---|---|---|---|---|
Coating | For High Hardness (Silicone-Based) | Processing Applications | Flat Surface / Side Surface / Groove / Inclined Cutting / Countersunk | Geometry | Sharp Corner |
Torsion Angle (θ) | Standard Helix (30 to 40°) | Additional Classification | Stocked Product | Tolerance of OD(mm) | 0 ~ -0.02 |
● Inventory Product □ Manufacturer Product | ● |
This page is TSC series carbide radius end mill for countersink, 3-flute / short model, part number TSC-ZEM3S6.5.
You can find the detail information about specifications and dimensions on part number TSC-ZEM3S6.5.
Configure
Basic Attributes
Type
Outer Diameter (D)(φ)
Flute Length (ℓ)(mm)
Shank Diameter (d)(mm)
Overall Length (L)(mm)
Filter by standard shipping days
Optional Attributes
Part Number |
---|
TSC-ZEM3S11 |
TSC-ZEM3S11.5 |
TSC-ZEM3S12 |
TSC-ZEM3S6.8 |
TSC-ZEM3S7 |
TSC-ZEM3S7.1 |
Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Figure |
---|---|---|---|---|---|---|---|---|---|
134.22 € | 1 | Available | 5 Days | 11 | 22 | 10 | 90 | 3 | |
159.88 € | 1 | Available | 5 Days | 11.5 | 22 | 10 | 90 | 3 | |
113.60 € | 1 | Available | 5 Days | 12 | 22 | 12 | 90 | 2 | |
91.85 € | 1 | Available | 5 Days | 6.8 | 16 | 6 | 70 | 3 | |
98.55 € | 1 | Available | 5 Days | 7 | 16 | 6 | 70 | 3 | |
92.10 € | 1 | Available | 5 Days | 7.1 | 16 | 6 | 70 | 3 |