Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
SEC-EM2S2.36
Part Number
|
---|
SEC-EM2S2.36 |
Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Processing Applications | Geometry | Additional Classification | Figure | ● Inventory Product □ Manufacturer Product | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
46.12 € | 1 | Available | 7 Days | 2.36 | 5 | 4 | 40 | - | Flat Surface / Side Surface / Groove / Inclined Cutting | With Lead | Manufactured Product | 1 | □ |
Loading...
Model Number
SEC-EM2S (Standard) / SEC-PEM2S (Sharp Edge)
Outer Diameter D |
Flute Length ℓ |
Overall Length L |
Shank Diameter d |
Figure | ● Stocked Product □ Manufactured Product |
0.2 | 0.4 | 35 | 3 | 1 | ● |
0.4 | 0.8 | 35 | 3 | 1 | ● |
0.5 | 1 | 35 | 3 | 1 | ● |
0.8 | 1.6 | 35 | 3 | 1 | ● |
1 | 2 | 40 | 4 | 1 | ● |
1.2 | 2.4 | 40 | 4 | 1 | ● |
1.5 | 3 | 40 | 4 | 1 | ● |
1.8 | 3.6 | 40 | 4 | 1 | ● |
1.91 ~ 1.99 | 4 | 40 | 4 | 1 | □ (Standard Only) |
2 | 4 | 40 | 4 | 1 | ● |
2.25 ~ 2.49 | 5 | 40 | 4 | 1 | □ (Standard Only) |
2.5 | 5 | 40 | 4 | 1 | ● |
2.81 ~ 2.99 | 6 | 45 | 6 | 1 | □ (Standard Only) |
3 | 6 | 45 | 6 | 1 | ● |
3.01 ~ 3.49 | 7 | 45 | 6 | 1 | □ |
3.5 | 7 | 45 | 6 | 1 | ● |
3.51 ~ 3.99 | 8 | 45 | 6 | 1 | □ |
4 | 8 | 45 | 6 | 1 | ● |
4.51 ~ 4.99 | 10 | 45 | 6 | 1 | □ |
5 | 10 | 45 | 6 | 1 | ● |
5.51 ~ 5.99 | 12 | 45 | 6 | 1 | □ |
6 | 12 | 45 | 6 | 2 | ● |
7.01 ~ 7.99 | 16 | 55 | 8 | 1 | □ |
8 | 16 | 55 | 8 | 2 | ● |
9.01 ~ 9.99 | 20 | 65 | 10 | 1 | □ |
10 | 20 | 65 | 10 | 2 | ● |
11.01 ~ 11.99 | 24 | 75 | 12 | 1 | □ |
12 | 24 | 75 | 12 | 2 | ● |
[ ! ]Outer diameters of manufactured products are designated in 0.01 mm increments
For Cutting Conditions, Refer to >>Click here.
● A general-purpose 2-flute end mill for a wide range of applications.
● Delivers a finish with very good working surface roughness after machining.
Work Material | General Steel / Heat-Treated Steel / Stainless Steel / Cast Iron / Aluminum Alloy / Copper Alloy | Number of Flutes(sheet) | 2 | Model | Square |
---|---|---|---|---|---|
Coating | Non-Coated | Torsion Angle (θ) | Standard Helix (30 to 40°) | Tolerance of OD(mm) | 0 ~ -0.02 |
This page is Carbide square end mill, 2-flute / 2D Flute Length (short) model, part number SEC-EM2S2.36.
You can find the detail information about specifications and dimensions on part number SEC-EM2S2.36.
Configure
Basic Attributes
Length Under Neck (ℓ1)(mm)
Processing Applications
Type
Outer Diameter (D)(φ)
Flute Length (ℓ)(mm)
Shank Diameter (d)(mm)
Overall Length (L)(mm)
Geometry
Additional Classification
Filter by standard shipping days
Optional Attributes
Part Number |
---|
SEC-EM2S0.8 |
SEC-EM2S1 |
SEC-EM2S1.2 |
SEC-EM2S2.37 |
SEC-EM2S2.38 |
SEC-EM2S2.39 |
Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Processing Applications | Geometry | Additional Classification | Figure | ● Inventory Product □ Manufacturer Product |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
22.87 € | 1 | Available | 5 Days | 0.8 | 1.6 | 3 | 35 | - | Inclined Cutting / Groove / Flat Surface / Side Surface | With Lead | Stocked Product | 1 | ● | |
14.36 € | 1 | Available | 5 Days | 1 | 2 | 4 | 40 | - | Inclined Cutting / Groove / Flat Surface / Side Surface | With Lead | Stocked Product | 1 | ● | |
23.54 € | 1 | Available | 5 Days | 1.2 | 2.4 | 4 | 40 | - | Inclined Cutting / Groove / Flat Surface / Side Surface | With Lead | Stocked Product | 1 | ● | |
46.12 € | 1 | Available | 7 Days | 2.37 | 5 | 4 | 40 | - | Inclined Cutting / Groove / Flat Surface / Side Surface | With Lead | Manufactured Product | 1 | □ | |
46.12 € | 1 | Available | 7 Days | 2.38 | 5 | 4 | 40 | - | Inclined Cutting / Groove / Flat Surface / Side Surface | With Lead | Manufactured Product | 1 | □ | |
46.12 € | 1 | Available | 7 Days | 2.39 | 5 | 4 | 40 | - | Inclined Cutting / Groove / Flat Surface / Side Surface | With Lead | Manufactured Product | 1 | □ |