Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
TSC-SHP-PSXB12
Part Number
|
---|
TSC-SHP-PSXB12 |
Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Number of Flutes (sheet) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Tolerance of OD (mm) | Figure | |
---|---|---|---|---|---|---|---|---|---|---|---|
109.77 € | 1 | Available | 5 Days | 12 | 18 | 6 | 12 | 75 | -0.01 ~ -0.045 | 2 |
Loading...
Model Number | Flute Length ℓ |
Overall Length L |
Shank Diameter d |
Number of Flutes | Figure | |
Outer Diameter D |
||||||
TSC-SHP-PSXB | 3 | 4.5 | 50 | 6 | 4 | 1 |
4 | 6 | 50 | 6 | 4 | 1 | |
5 | 7.5 | 50 | 6 | 4 | 1 | |
6 | 9 | 50 | 6 | 6 | 2 | |
8 | 12 | 65 | 8 | 6 | 2 | |
10 | 15 | 70 | 10 | 6 | 2 | |
12 | 18 | 75 | 12 | 6 | 2 |
For Cutting Conditions, Refer to >>Click here.
● It is designed to have an ideal flute length, shank length and overall length, keeping in mind the usage of a shrink fit holder for processing.
● Blade runout accuracy within 5 μm (our measured ratio) / back taper within 5 μm / shank diameter, tolerance h5 standard, has been adopted for a high quality tool with minimal quality variation. It is
ideal for side-finishing machining requiring high accuracy.
● Designed to have a blade shape with emphasis on sharpness thanks to the positive blade / sharp edge tip, it is suitable for machining raw materials of carbon steel, etc.
● The TS coating consisting of a nitride-based composite film with a fully crystalline structure means that it delivers excellent durability when used in carbon steel raw materials, in addition to heat treated steel.
Work Material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Stainless Steel / Cast Iron / Aluminum Alloy / Copper Alloy | Model | Highly-Helical | Coating | For High Hardness (Silicone-Based) |
---|---|---|---|---|---|
Processing Applications | Flat Surface / Side Surface / Inclined Cutting | Geometry | Sharp Corner | Torsion Angle (θ) | Powerful Helix (45° to 60°) |
Additional Classification | Stocked Product | ● Inventory Product □ Manufacturer Product | ● |
This page is TSC series carbide high-helical end mill (for shrink fit holder / cutting edge deflection accuracy of 5μm or Less). Multi-flute, 53° spiral / stub model, part number TSC-SHP-PSXB12.
You can find the detail information about specifications and dimensions on part number TSC-SHP-PSXB12.
Configure
Basic Attributes
Type
Outer Diameter (D)(φ)
Flute Length (ℓ)(mm)
Number of Flutes(sheet)
Shank Diameter (d)(mm)
Overall Length (L)(mm)
Filter by standard shipping days
Optional Attributes
Part Number |
---|
TSC-SHP-PSXB10 |
TSC-SHP-PSXB3 |
TSC-SHP-PSXB4 |
TSC-SHP-PSXB5 |
TSC-SHP-PSXB6 |
TSC-SHP-PSXB8 |
Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Number of Flutes (sheet) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Tolerance of OD (mm) | Figure |
---|---|---|---|---|---|---|---|---|---|---|---|
160.30 € | 1 | Available | 5 Days | 10 | 15 | 6 | 10 | 70 | -0.01 ~ -0.035 | 2 | |
98.32 € | 1 | Available | 5 Days | 3 | 4.5 | 4 | 6 | 50 | -0.01 ~ -0.035 | 1 | |
108.68 € | 1 | Available | 5 Days | 4 | 6 | 4 | 6 | 50 | -0.01 ~ -0.035 | 1 | |
115.19 € | 1 | Available | 5 Days | 5 | 7.5 | 4 | 6 | 50 | -0.01 ~ -0.035 | 1 | |
105.61 € | 1 | Available | 5 Days | 6 | 9 | 6 | 6 | 50 | -0.01 ~ -0.035 | 2 | |
144.78 € | 1 | Available | 5 Days | 8 | 12 | 6 | 8 | 65 | -0.01 ~ -0.035 | 2 |