TSC series carbide roughing end mill, fine pitch / long regular model (TSC-LS-RFPR10-8)
Click on this image to zoom in.
Click on this image to zoom in.
- Volume Discount
Product Details:
Manufacturer part number: TSC-LS-RFPR10-8
Brand: MISUMI
Price: 119.23 €
Delivery time: 5 Days
Technical Data:
Outer Diameter (D): 10 φ
Flute Length (ℓ): 25 mm
Number of Flutes: 4 sheet
Shank Diameter (d): 8 mm
Overall Length (L): 100 mm
- TS
- General Steel
- R (Regular)
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
TSC-LS-RFPR10-8
Part Number
|
|---|
| TSC-LS-RFPR10-8 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Number of Flutes (sheet) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Processing Applications | Additional Classification | Figure | ● Inventory Product □ Manufacturer Product | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
119.23 € | 1 | Available | 5 Days | 10 | 25 | 4 | 8 | 100 | - | Flat Surface / Side Surface / Inclined Cutting | Stocked Product | 3 | ● |
Loading...
Specifications
| Model Number | Shank Diameter d |
Flute Length ℓ |
Overall Length L |
Number of Flutes | Figure | ||
| Outer Diameter D |
Shank Diameter d |
||||||
| TSC-LS-RFPR | 5 | — | 6 | 15 | 100 | 3 | 1 |
| 6 | — | 6 | 15 | 100 | 3 | 2 | |
| 8 | — | 8 | 20 | 100 | 4 | 2 | |
| 8 | 6 | 6 | 20 | 100 | 4 | 3 | |
| 10 | — | 10 | 25 | 100 | 4 | 2 | |
| 10 | 8 | 8 | 25 | 100 | 4 | 3 | |
| 12 | — | 12 | 30 | 125 | 4 | 2 | |
| 12 | 10 | 10 | 30 | 100 | 4 | 3 | |
| 13 | — | 12 | 30 | 125 | 4 | 3 | |
| 14 | — | 12 | 35 | 125 | 4 | 3 | |
| 16 | — | 16 | 40 | 125 | 4 | 2 | |
| 18 | — | 16 | 45 | 125 | 4 | 2 | |
| 20 | — | 20 | 45 | 150 | 4 | 2 |
[ ! ]For shank diameter (d) specifications listed in blue, specify both a outer diameter (D) and shank diameter (d).
For Cutting Conditions, Refer to >>Click here.
More Information
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and is ideal for high speed machining / dry machining.
● It adopts a fine pitch nick that delivers a finish with good surface roughness after machining.
● The long shank models are ideal for machining deep grooves.
Basic information
| Work Material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Stainless Steel / Cast Iron / Aluminum Alloy / Copper Alloy | Model | Roughing | Coating | For High Hardness (Silicone-Based) |
|---|---|---|---|---|---|
| Geometry | Ultra-Small R | Torsion Angle (θ) | Weak Helix (15 to 25°) | Tolerance of OD(mm) | ±0.06 |
This page is TSC series carbide roughing end mill, fine pitch / long regular model, part number TSC-LS-RFPR10-8.
You can find the detail information about specifications and dimensions on part number TSC-LS-RFPR10-8.
Configure
Basic Attributes
-
Length Under Neck (ℓ1)(mm)
-
Processing Applications
- Flat Surface
- Side Surface
- Groove
- Inclined Cutting
-
Type
- SN-TSC-LS-RFPR
- TSC-LS-RFPR
-
Outer Diameter (D)(φ)
-
Flute Length (ℓ)(mm)
-
Number of Flutes(sheet)
-
Shank Diameter (d)(mm)
-
Overall Length (L)(mm)
-
Additional Classification
- Standard Neck Relief
- Stocked Product
Filter by standard shipping days
-
- All
- 5 Days or Less
- 8 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Variation of this product
| Part Number |
|---|
| TSC-LS-RFPR10 |
| TSC-LS-RFPR12 |
| TSC-LS-RFPR12-10 |
| TSC-LS-RFPR13 |
| TSC-LS-RFPR14 |
| TSC-LS-RFPR16 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Number of Flutes (sheet) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Processing Applications | Additional Classification | Figure | ● Inventory Product □ Manufacturer Product |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
136.38 € | 1 | Available | 5 Days | 10 | 25 | 4 | 10 | 100 | - | Inclined Cutting / Flat Surface / Side Surface | Stocked Product | 2 | ● | |
94.76 € | 1 | Available | 5 Days | 12 | 30 | 4 | 12 | 125 | - | Inclined Cutting / Flat Surface / Side Surface | Stocked Product | 2 | ● | |
132.53 € | 1 | Available | 5 Days | 12 | 30 | 4 | 10 | 100 | - | Inclined Cutting / Flat Surface / Side Surface | Stocked Product | 2 | ● | |
197.13 € | 1 | Available | 5 Days | 13 | 30 | 4 | 12 | 125 | - | Inclined Cutting / Flat Surface / Side Surface | Stocked Product | 3 | ● | |
99.83 € | 1 | Available | 5 Days | 14 | 35 | 4 | 12 | 125 | - | Inclined Cutting / Flat Surface / Side Surface | Stocked Product | 3 | ● | |
137.95 € | 1 | Available | 5 Days | 16 | 40 | 4 | 16 | 125 | - | Inclined Cutting / Flat Surface / Side Surface | Stocked Product | 2 | ● |
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.