TSC series carbide tapered end mill, 4-flute / for deep ribbing (TSC-TEM4LB2-2-12)
Click on this image to zoom in.
Click on this image to zoom in.
- Volume Discount
Product Details:
Manufacturer part number: TSC-TEM4LB2-2-12
Brand: MISUMI
Price: 120.85 €
Delivery time: 5 Days
Technical Data:
Single Angle (θ): 2 Degree
Outer Diameter (D): 2 φ
Flute Length (ℓ): 12 mm
Shank Diameter (d): 4 mm
Overall Length (L): 50 mm
- TS
- General Steel
- 4 Flutes
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
TSC-TEM4LB2-2-12
Part Number
|
|---|
| TSC-TEM4LB2-2-12 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Single Angle (θ) (Degree) | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Large Tip Diameter D1 (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|
120.85 € | 1 | Available | 5 Days | 2 | 2 | 12 | 4 | 50 | 2.84 |
Loading...
Specifications
| Model Number | Large Tip Diameter D1 |
Overall Length L |
Shank Diameter d |
|||
| Outer Diameter D |
Single Angle θ |
Flute Length ℓ |
||||
| TSC-TEM4LB | 0.4 | 0.5° | 2 | 0.43 | 40 | 3 |
| 1° | 2 | 0.47 | 40 | 3 | ||
| 1.5° | 2 | 0.50 | 40 | 3 | ||
| 2° | 2 | 0.54 | 40 | 3 | ||
| 0.5° | 3 | 0.47 | 40 | 3 | ||
| 1° | 3 | 0.54 | 40 | 3 | ||
| 1.5° | 3 | 0.61 | 40 | 3 | ||
| 2° | 3 | 0.68 | 40 | 3 | ||
| 0.5 | 0.5° | 4 | 0.57 | 40 | 3 | |
| 1° | 4 | 0.64 | 40 | 3 | ||
| 1.5° | 4 | 0.71 | 40 | 3 | ||
| 2° | 4 | 0.78 | 40 | 3 | ||
| 0.6 | 0.5° | 4 | 0.67 | 40 | 3 | |
| 1° | 4 | 0.74 | 40 | 3 | ||
| 1.5° | 4 | 0.81 | 40 | 3 | ||
| 2° | 4 | 0.88 | 40 | 3 | ||
| 0.5° | 6 | 0.70 | 40 | 3 | ||
| 1° | 6 | 0.81 | 40 | 3 | ||
| 1.5° | 6 | 0.91 | 40 | 3 | ||
| 2° | 6 | 1.02 | 40 | 3 | ||
| 0.8 | 0.5° | 6 | 0.90 | 45 | 4 | |
| 1° | 6 | 1.01 | 45 | 4 | ||
| 1.5° | 6 | 1.11 | 45 | 4 | ||
| 2° | 6 | 1.22 | 45 | 4 | ||
| 0.5° | 8 | 0.94 | 45 | 4 | ||
| 1° | 8 | 1.08 | 45 | 4 | ||
| 1.5° | 8 | 1.22 | 45 | 4 | ||
| 2° | 8 | 1.36 | 45 | 4 |
| Model Number | Large Tip Diameter D1 |
Overall Length L |
Shank Diameter d |
|||
| Outer Diameter D |
Single Angle θ |
Flute Length ℓ |
||||
| TSC-TEM4LB | 1 | 0.5° | 6 | 1.10 | 45 | 4 |
| 1° | 6 | 1.21 | 45 | 4 | ||
| 1.5° | 6 | 1.31 | 45 | 4 | ||
| 2° | 6 | 1.42 | 45 | 4 | ||
| 0.5° | 8 | 1.14 | 45 | 4 | ||
| 1° | 8 | 1.28 | 45 | 4 | ||
| 1.5° | 8 | 1.42 | 45 | 4 | ||
| 2° | 8 | 1.56 | 45 | 4 | ||
| 0.5° | 10 | 1.17 | 45 | 4 | ||
| 1° | 10 | 1.35 | 45 | 4 | ||
| 1.5° | 10 | 1.52 | 45 | 4 | ||
| 2° | 10 | 1.70 | 45 | 4 | ||
| 1.2 | 0.5° | 8 | 1.34 | 45 | 4 | |
| 1° | 8 | 1.48 | 45 | 4 | ||
| 1.5° | 8 | 1.62 | 45 | 4 | ||
| 2° | 8 | 1.76 | 45 | 4 | ||
| 0.5° | 10 | 1.37 | 45 | 4 | ||
| 1° | 10 | 1.55 | 45 | 4 | ||
| 1.5° | 10 | 1.72 | 45 | 4 | ||
| 2° | 10 | 1.90 | 45 | 4 | ||
| 1.5 | 0.5° | 10 | 1.67 | 50 | 4 | |
| 1° | 10 | 1.85 | 50 | 4 | ||
| 1.5° | 10 | 2.02 | 50 | 4 | ||
| 2° | 10 | 2.20 | 50 | 4 | ||
| 0.5° | 12 | 1.71 | 50 | 4 | ||
| 1° | 12 | 1.92 | 50 | 4 | ||
| 1.5° | 12 | 2.13 | 50 | 4 | ||
| 2° | 12 | 2.34 | 50 | 4 | ||
| 2 | 0.5° | 12 | 2.21 | 50 | 4 | |
| 1° | 12 | 2.42 | 50 | 4 | ||
| 1.5° | 12 | 2.63 | 50 | 4 | ||
| 2° | 12 | 2.84 | 50 | 4 |
For Cutting Conditions, Refer to >>Click here.
More Information
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and ideal for high speed machining / dry machining.
● The blade tip has a sharp edge allowing corner edges to also be machined.
Basic information
| Model | Tapered Square | Work Material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / High-Hardness Steel ~ HRC60 / Stainless Steel / Cast Iron / Aluminum / Copper | Number of Flutes(sheet) | 4 |
|---|---|---|---|---|---|
| Coating | For High Hardness (Silicone-Based) | Torsion Angle | Standard Helix (30 to 40°) |
This page is TSC series carbide tapered end mill, 4-flute / for deep ribbing, part number TSC-TEM4LB2-2-12.
You can find the detail information about specifications and dimensions on part number TSC-TEM4LB2-2-12.
Configure
Basic Attributes
-
Type
- TSC-TEM4LB
-
Single Angle (θ)(Degree)
-
Outer Diameter (D)(φ)
-
Flute Length (ℓ)(mm)
-
Shank Diameter (d)(mm)
-
Overall Length (L)(mm)
Filter by standard shipping days
-
- All
- 5 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Variation of this product
| Part Number |
|---|
| TSC-TEM4LB0.4-0.5-2 |
| TSC-TEM4LB0.4-1-3 |
| TSC-TEM4LB0.4-1.5-2 |
| TSC-TEM4LB0.4-1.5-3 |
| TSC-TEM4LB0.4-2-2 |
| TSC-TEM4LB0.4-2-3 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | Single Angle (θ) (Degree) | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Large Tip Diameter D1 (mm) |
|---|---|---|---|---|---|---|---|---|---|---|
107.20 € | 1 | Available | 5 Days | 0.5 | 0.4 | 2 | 3 | 40 | 0.43 | |
96.08 € | 1 | Available | 5 Days | 1 | 0.4 | 3 | 3 | 40 | 0.54 | |
129.56 € | 1 | Available | 5 Days | 1.5 | 0.4 | 2 | 3 | 40 | 0.50 | |
96.08 € | 1 | Available | 5 Days | 1.5 | 0.4 | 3 | 3 | 40 | 0.61 | |
82.12 € | 1 | Available | 5 Days | 2 | 0.4 | 2 | 3 | 40 | 0.54 | |
87.04 € | 1 | Available | 5 Days | 2 | 0.4 | 3 | 3 | 40 | 0.68 |
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.