Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub, Slim Shank Model (SEC-SS-ALHEM3B6.2)
Click on this image to zoom in.
Click on this image to zoom in.
- Volume Discount
Product Details:
Manufacturer part number: SEC-SS-ALHEM3B6.2
Brand: MISUMI
Price: 72.20 €
Delivery time: 5 Days
Technical Data:
Outer Diameter (D): 6.2 φ
Flute Length (ℓ): 9 mm
Shank Diameter (d): 6 mm
Overall Length (L): 80 mm
- Non-Coated
- Aluminum
- 3 Flutes
- B (Stub)
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
SEC-SS-ALHEM3B6.2
Part Number
|
|---|
| SEC-SS-ALHEM3B6.2 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | |
|---|---|---|---|---|---|---|---|---|
72.20 € | 1 | Available | 5 Days | 6.2 | 9 | 6 | 80 |
Loading...
Specifications
| Model Number | Flute Length ℓ |
Overall Length L |
Shank Diameter d |
Figure | |
| Outer Diameter D |
|||||
| SEC-SS-ALHEM3B | 6.2 | 9 | 80 | 6 | 2 |
| 8.2 | 12 | 100 | 8 | 2 | |
| 10.2 | 15 | 130 | 10 | 2 | |
| 12.2 | 18 | 150 | 12 | 2 | |
| 16.2 | 24 | 180 | 16 | 2 |
For Cutting Conditions, Refer to >>Click here.
More Information
● Adopts a sharp cutting edge that prevents the built-up edge that is unique to aluminum.
● The shank relief also makes it suitable in cases where tool interference may be an issue.
● The corners of the blade tip are slightly rounded to prevent chipping when cutting.
● The rounded edge of the blade rear end suppresses machining streaks caused by multi-stage machining of side surfaces. (SEC-LS-ALHEM3B Characteristics)
● The unique tip pocket shape allows for the cutting of grooves to be achieved with 2 flutes in parallel at the cutting depth. (SEC-SS-ALHEM3B Characteristics)
● It adopts a 3-flute shape to be strong against chatter and is capable of high-speed, high-efficiency machining of grooves. (SEC-SS-ALHEM3B Characteristics)
Basic information
| Work Material | Aluminum Alloy / Copper Alloy / Graphite / Resin | Number of Flutes(sheet) | 3 | Model | Square |
|---|---|---|---|---|---|
| Coating | Non-Coated | Processing Applications | Flat Surface / Side Surface / Groove / Inclined Cutting | Geometry | Ultra-Small R |
| Torsion Angle (θ) | Powerful Helix (45° to 60°) | Additional Classification | Stocked Product | Tolerance of OD(mm) | 0 ~ -0.02 |
| ● Inventory Product □ Manufacturer Product | ● |
This page is Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub, Slim Shank Model, part number SEC-SS-ALHEM3B6.2.
You can find the detail information about specifications and dimensions on part number SEC-SS-ALHEM3B6.2.
Configure
Basic Attributes
-
Type
- SEC-SS-ALHEM3B
-
Outer Diameter (D)(φ)
-
Flute Length (ℓ)(mm)
-
Shank Diameter (d)(mm)
-
Overall Length (L)(mm)
Filter by standard shipping days
-
- All
- 5 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Variation of this product
| Part Number |
|---|
| SEC-SS-ALHEM3B10.2 |
| SEC-SS-ALHEM3B12.2 |
| SEC-SS-ALHEM3B16.2 |
| SEC-SS-ALHEM3B8.2 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) |
|---|---|---|---|---|---|---|---|---|
127.70 € | 1 | Available | 5 Days | 10.2 | 15 | 10 | 130 | |
140.36 € | 1 | Available | 5 Days | 12.2 | 18 | 12 | 150 | |
338.16 € | 1 | Available | 5 Days | 16.2 | 24 | 16 | 180 | |
107.27 € | 1 | Available | 5 Days | 8.2 | 12 | 8 | 100 |
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.