Carbide Roughing End Mill for Aluminum Machining, 3-Flute / Regular Model (SEC-ALRFR8)
Click on this image to zoom in.
Click on this image to zoom in.
- Volume Discount
Product Details:
Manufacturer part number: SEC-ALRFR8
Brand: MISUMI
Price: 57.85 €
Delivery time: 5 Days
Technical Data:
Outer Diameter (D): 8 φ
Flute Length (ℓ): 20 mm
Shank Diameter (d): 8 mm
Overall Length (L): 72 mm
Length Under Neck (ℓ1): - mm
- Non-Coated
- Aluminum
- 3 Flutes
- R (Regular)
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
SEC-ALRFR8
Part Number
|
|---|
| SEC-ALRFR8 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Additional Classification | Tolerance of OD (mm) | Figure | ● Inventory Product □ Manufacturer Product | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
57.85 € | 1 | Available | 5 Days | 8 | 20 | 8 | 72 | - | Stocked Product | 0 ~ -0.058 | 2 | ● |
Loading...
Specifications
| Model Number | Flute Length ℓ |
Overall Length L |
Shank Diameter d |
Figure | |
| Outer Diameter D |
|||||
| SEC-ALRFR | 5 | 15 | 57 | 6 | 1 |
| 6 | 15 | 57 | 6 | 2 | |
| 8 | 20 | 72 | 8 | 2 | |
| 10 | 25 | 72 | 10 | 2 | |
| 12 | 30 | 100 | 12 | 2 | |
| 16 | 40 | 100 | 16 | 2 | |
| 20 | 45 | 100 | 20 | 2 |
For Cutting Conditions, Refer to >>Click here.
More Information
● The wide pitch and shallow nicks allow the time taken for the rough machining of aluminum to be reduced.
● It has a 3-flute structure for wider chip pockets which discharges chips better, allowing for high-efficiency aluminum machining.
Basic information
| Work Material | Aluminum Alloy / Copper Alloy | Number of Flutes(sheet) | 3 | Model | Roughing |
|---|---|---|---|---|---|
| Coating | Non-Coated | Processing Applications | Flat Surface / Side Surface / Groove / Inclined Cutting | Geometry | Ultra-Small R |
| Torsion Angle (θ) | Standard Helix (30 to 40°) |
This page is Carbide Roughing End Mill for Aluminum Machining, 3-Flute / Regular Model, part number SEC-ALRFR8.
You can find the detail information about specifications and dimensions on part number SEC-ALRFR8.
Configure
Basic Attributes
-
Length Under Neck (ℓ1)(mm)
-
Type
- SEC-ALRFR
- SN-SEC-ALRFR
-
Outer Diameter (D)(φ)
-
Flute Length (ℓ)(mm)
-
Shank Diameter (d)(mm)
-
Overall Length (L)(mm)
-
Additional Classification
- Standard Neck Relief
- Stocked Product
Filter by standard shipping days
-
- All
- 5 Days or Less
- 8 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Variation of this product
| Part Number |
|---|
| SEC-ALRFR10 |
| SEC-ALRFR12 |
| SEC-ALRFR16 |
| SEC-ALRFR20 |
| SEC-ALRFR5 |
| SEC-ALRFR6 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Additional Classification | Tolerance of OD (mm) | Figure | ● Inventory Product □ Manufacturer Product |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
88.08 € | 1 | Available | 5 Days | 10 | 25 | 10 | 72 | - | Stocked Product | 0 ~ -0.070 | 2 | ● | |
112.84 € | 1 | Available | 5 Days | 12 | 30 | 12 | 100 | - | Stocked Product | 0 ~ -0.070 | 2 | ● | |
190.53 € | 1 | Available | 5 Days | 16 | 40 | 16 | 100 | - | Stocked Product | 0 ~ -0.070 | 2 | ● | |
166.82 € | 1 | Available | 5 Days | 20 | 45 | 20 | 100 | - | Stocked Product | 0 ~ -0.084 | 2 | ● | |
48.89 € | 1 | Available | 5 Days | 5 | 15 | 6 | 57 | - | Stocked Product | 0 ~ -0.048 | 1 | ● | |
44.16 € | 1 | Available | 5 Days | 6 | 15 | 6 | 57 | - | Stocked Product | 0 ~ -0.058 | 2 | ● |
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.