Carbide Square End Mill for Graphite Machining, 2-Flute / Non-Coated, Long Model (Part Numbers)
Click on this image to zoom in.
Click on this image to zoom in.
- Volume Discount
-Uncoated product with excellent cost efficiency
-Deep digging is possible due to long flute length
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
- Non-Coated
- Graphite
- 2 Flutes
- L (Long)
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
SEC-GREM2L10
Part Number
|
|---|
| SEC-GREM2L10 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Under Neck Diameter d1 (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|
188.17 € | 1 | Available | 5 Days | 10 | 50 | 10 | 180 | 80 | 9.7 |
Loading...
Specifications
| Model Number | Length Under Neck ℓ1 |
Flute Length ℓ |
Under Neck Diameter d1 |
Overall Length L |
Shank Diameter d |
|
| Outer Diameter D |
||||||
| SEC-GREM2L | 1 | 10 | 5 | 0.9 | 75 | 4 |
| 2 | 20 | 10 | 1.9 | 75 | 4 | |
| 3 | 30 | 15 | 2.9 | 75 | 4 | |
| 4 | 40 | 20 | 3.9 | 100 | 4 | |
| 6 | 60 | 30 | 5.8 | 150 | 6 | |
| 8 | 70 | 40 | 7.8 | 160 | 8 | |
| 10 | 80 | 50 | 9.7 | 180 | 10 | |
| 12 | 85 | 60 | 11.7 | 200 | 12 |
For Cutting Conditions, Refer to >>Click here.
Basic information
| Work Material | Aluminum Alloy / Copper Alloy / Graphite / Resin | Number of Flutes(sheet) | 2 | Model | Square |
|---|---|---|---|---|---|
| Coating | Non-Coated | Processing Applications | Flat Surface / Side Surface / Groove / Inclined Cutting | Geometry | Sharp Corner |
| Torsion Angle (θ) | Standard Helix (30 to 40°) | Additional Classification | Stocked Product | Tolerance of OD(mm) | 0 ~ -0.02 |
| ● Inventory Product □ Manufacturer Product | ● |
This page is Carbide Square End Mill for Graphite Machining, 2-Flute / Non-Coated, Long Model, part number SEC-GREM2L10.
You can find the detail information about specifications and dimensions on part number SEC-GREM2L10.
Configure
Basic Attributes
-
Type
- SEC-GREM2L
-
Outer Diameter (D)(φ)
-
Flute Length (ℓ)(mm)
-
Shank Diameter (d)(mm)
-
Overall Length (L)(mm)
-
Length Under Neck (ℓ1)(mm)
Filter by standard shipping days
-
- All
- 5 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Variation of this product
| Part Number |
|---|
| SEC-GREM2L1 |
| SEC-GREM2L12 |
| SEC-GREM2L2 |
| SEC-GREM2L3 |
| SEC-GREM2L4 |
| SEC-GREM2L6 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Under Neck Diameter d1 (mm) |
|---|---|---|---|---|---|---|---|---|---|---|
118.99 € | 1 | Available | 5 Days | 1 | 5 | 4 | 75 | 10 | 0.9 | |
133.86 € | 1 | Available | 5 Days | 12 | 60 | 12 | 200 | 85 | 11.7 | |
129.61 € | 1 | Available | 5 Days | 2 | 10 | 4 | 75 | 20 | 1.9 | |
109.42 € | 1 | Available | 5 Days | 3 | 15 | 4 | 75 | 30 | 2.9 | |
83.60 € | 1 | Available | 5 Days | 4 | 20 | 4 | 100 | 40 | 3.9 | |
100.88 € | 1 | Available | 5 Days | 6 | 30 | 6 | 150 | 60 | 5.8 |
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.