Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
TSC-CRLN-HFEM3S10-R2-50
Part Number
|
---|
TSC-CRLN-HFEM3S10-R2-50 |
Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Outer Diameter (D) (φ) | R Size (mm) | Flute Length (ℓ) (mm) | Overall Length (L) (mm) | Shank Diameter (d) (mm) | Effective Length (mm) | Figure | Under Neck Diameter d1 (mm) | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
95.10 € | 1 | Available | 5 Days | 10 | 2 | 20 | 100 | 10 | 50 | 2 | 9.7 |
Loading...
Model Number | Flute Length ℓ |
Under Neck Diameter d1 |
Overall Length L |
Shank Diameter d |
Figure | |||
Outer Diameter D |
Radius R |
Effective Length ℓ1 |
||||||
TSC-CRLN-HFEM3S | 4 | 1 | 28 | 8 | 3.8 | 70 | 4 | 1 |
6 | 1.5 | 30 | 12 | 5.8 | 80 | 6 | 2 | |
6 | 1.5 | 42 | 12 | 5.8 | 90 | 6 | 2 | |
8 | 2 | 40 | 16 | 7.7 | 85 | 8 | 2 | |
8 | 2 | 56 | 16 | 7.7 | 100 | 8 | 2 | |
10 | 2 | 50 | 20 | 9.7 | 100 | 10 | 2 | |
10 | 2 | 70 | 20 | 9.7 | 120 | 10 | 2 | |
10 | 2 | 90 | 20 | 9.7 | 140 | 10 | 2 | |
12 | 2 | 60 | 24 | 11.7 | 110 | 12 | 2 | |
12 | 2 | 84 | 24 | 11.7 | 135 | 12 | 2 |
For Cutting Conditions, Refer to >>Click here.
● It has a new TS film coating with much greater oxidation resistance and hardness than conventional films, realizing a longer operational life.
● The combination of a radius with negative flutes, appropriate core thickness and 45° twist yields an improved high-capacity machining thanks to the high rigidity, sharpness and high feed rate.
● The long neck model is ideal for machining deep grooves, such as deep pockets.
● Universal model capable of everything from engraving through to side-surface, curving, coarse and medium finishing.
Work Material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / High-Hardness Steel ~ HRC60 / High-Hardness Steel – HRC65 / Stainless Steel / Cast Iron | Number of Flutes(sheet) | 3 | Model | Long Neck Radius |
---|---|---|---|---|---|
Processing Applications | Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting | Coating | For High Hardness (Silicone-Based) | Torsion Angle (θ) | Powerful Helix (45° to 60°) |
R Precision(μm) | ±0.015 | Additional Classification | Stocked Product |
This page is TSC Series Coated Carbide Radius End Mill, 3-Flute, 45° Spiral / Short, Long Neck Model, part number TSC-CRLN-HFEM3S10-R2-50.
You can find the detail information about specifications and dimensions on part number TSC-CRLN-HFEM3S10-R2-50.
Configure
Basic Attributes
Type
Outer Diameter (D)(φ)
R Size(mm)
Flute Length (ℓ)(mm)
Overall Length (L)(mm)
Shank Diameter (d)(mm)
Effective Length(mm)
Filter by standard shipping days
Optional Attributes
Part Number |
---|
TSC-CRLN-HFEM3S10-R2-70 |
TSC-CRLN-HFEM3S10-R2-90 |
TSC-CRLN-HFEM3S12-R2-60 |
TSC-CRLN-HFEM3S12-R2-84 |
TSC-CRLN-HFEM3S4-R1-28 |
TSC-CRLN-HFEM3S6-R1.5-30 |
Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | Outer Diameter (D) (φ) | R Size (mm) | Flute Length (ℓ) (mm) | Overall Length (L) (mm) | Shank Diameter (d) (mm) | Effective Length (mm) | Figure | Under Neck Diameter d1 (mm) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
112.02 € | 1 | Available | 5 Days | 10 | 2 | 20 | 120 | 10 | 70 | 2 | 9.7 | |
111.32 € | 1 | Available | 5 Days | 10 | 2 | 20 | 140 | 10 | 90 | 2 | 9.7 | |
121.93 € | 1 | Available | 5 Days | 12 | 2 | 24 | 110 | 12 | 60 | 2 | 11.7 | |
150.13 € | 1 | Available | 5 Days | 12 | 2 | 24 | 135 | 12 | 84 | 2 | 11.7 | |
86.79 € | 1 | Available | 5 Days | 4 | 1 | 8 | 70 | 4 | 28 | 1 | 3.8 | |
94.29 € | 1 | Available | 5 Days | 6 | 1.5 | 12 | 80 | 6 | 30 | 2 | 5.8 |