High-Speed Steel Corner C End Mill, 2-Flute / Regular Model (Part Numbers)
Click on this image to zoom in.
Click on this image to zoom in.
-High speed steel cutter with 2 cutting edges and corner chamfer with selectable corner chamfer in 0.1 mm steps
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
- Non-Coated
- 2 Flutes
- R (Regular)
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
| Part Number | Minimum order quantity | Volume Discount | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Coating | Overall Length (L) (mm) | Corner (C) (mm) | Length Under Neck (θ) | |
|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 7 Days | 3 | 10 | 6 | Non-Coated | 50 | 0.1 ～ 0.7 | 15° | ||
| 1 | 7 Days | 4 | 12 | 8 | Non-Coated | 60 | 0.1 ～ 1 | 15° | ||
| 1 | 7 Days | 5 | 15 | 8 | Non-Coated | 60 | 0.1 ～ 1 | 15° | ||
| 1 | 7 Days | 6 | 15 | 8 | Non-Coated | 60 | 0.1 ～ 1.2 | 15° | ||
| 1 | 7 Days | 7 | 20 | 10 | Non-Coated | 60 | 0.1 ～ 1.4 | 15° | ||
| 1 | 7 Days | 8 | 20 | 10 | Non-Coated | 60 | 0.1 ～ 1.4 | 15° | ||
| 1 | 7 Days | 9 | 25 | 10 | Non-Coated | 70 | 0.1 ～ 2 | 15° | ||
| 1 | 7 Days | 10 | 25 | 10 | Non-Coated | 70 | 0.1 ～ 3 | - | ||
| 1 | 7 Days | 11 | 30 | 12 | Non-Coated | 80 | 0.1 ～ 3 | 15° | ||
| 1 | 7 Days | 12 | 30 | 12 | Non-Coated | 80 | 0.1 ～ 3 | - | ||
| 1 | 7 Days | 13 | 35 | 12 | Non-Coated | 85 | 0.1 ～ 3.5 | - | ||
| 1 | 7 Days | 14 | 35 | 16 | Non-Coated | 90 | 0.1 ～ 3.5 | 15° | ||
| 1 | 7 Days | 15 | 40 | 16 | Non-Coated | 95 | 0.1 ～ 4 | 15° | ||
| 1 | 7 Days | 16 | 40 | 16 | Non-Coated | 95 | 0.1 ～ 4 | - | ||
| 1 | 7 Days | 18 | 40 | 16 | Non-Coated | 95 | 0.1 ～ 4 | - | ||
| 1 | 7 Days | 20 | 45 | 20 | Non-Coated | 110 | 0.1 ～ 5 | - | ||
| 1 | 7 Days | 25 | 60 | 25 | Non-Coated | 130 | 0.1 ～ 5 | - |
Loading...
Specifications
| Model Number | Corner C 0.1 mm Increment Designation |
Flute Length ℓ |
Under Neck Angle θ |
Overall Length L |
Shank Diameter d |
|
| Outer Diameter D |
||||||
| CEM2R (Non-Coated Type) V-CEM2R (TiCN Coating Type) |
3 | 0.1 ~ 0.7 | 10 | 15° | 50 | 6 |
| 4 | 0.1 ~ 1.0 | 12 | 15° | 60 | 8 | |
| 5 | 0.1 ~ 1.0 | 15 | 15° | 60 | 8 | |
| 6 | 0.1 ~ 1.2 | 15 | 15° | 60 | 8 | |
| 7 | 0.1 ~ 1.4 | 20 | 15° | 60 | 10 | |
| 8 | 0.1 ~ 1.4 | 20 | 15° | 60 | 10 | |
| 9 | 0.1 ~ 2.0 | 25 | 15° | 70 | 10 | |
| 10 | 0.1 ~ 3.0 | 25 | — | 70 | 10 | |
| 11 | 0.1 ~ 3.0 | 30 | 15° | 80 | 12 | |
| 12 | 0.1 ~ 3.0 | 30 | — | 80 | 12 | |
| 13 | 0.1 ~ 3.5 | 35 | — | 85 | 12 | |
| 14 | 0.1 ~ 3.5 | 35 | 15° | 90 | 16 | |
| 15 | 0.1 ~ 4.0 | 40 | 15° | 95 | 16 | |
| 16 | 0.1 ~ 4.0 | 40 | — | 95 | 16 | |
| 18 | 0.1 ~ 4.0 | 40 | — | 95 | 16 | |
| 20 | 0.1 ~ 4.5 | 45 | — | 110 | 20 | |
| 25 | 0.1 ~ 5.0 | 60 | — | 130 | 25 |
[ ! ]Since additional processing is given to EM2R, the flute length (ℓ) and total length (L) are somewhat shorter than the indicated dimensions.
For Cutting Conditions, Refer to >>Click here.
Basic information
| Work Material | General Steel / Heat-Treated Steel / Cast Iron / Aluminum / Copper | Type of Flute | Square | Number of Flutes(sheet) | 2 |
|---|---|---|---|---|---|
| Tool Material Type | Cobalt High-Speed Steel | Processing Applications | Flat Surface / Side Surface / Groove | Torsion Angle (θ) | Standard Helix (30 to 40°) |
| Base-Blade Availability | Included | Tolerance(mm) | 0 ~ -0.03 |
Configure
Basic Attributes
-
Outer Diameter (D)(φ)
-
Flute Length (ℓ)(mm)
-
Shank Diameter (d)(mm)
-
Overall Length (L)(mm)
-
Corner (C)(mm)
-
Type
- CEM2R
- V-CEM2R
-
Coating
- TiCN
- Non-Coated
Filter by standard shipping days
-
- All
- 7 Days or Less
- 13 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.