High-Speed Steel 0.01 mm Unit Outer Diameter Designated End Mill, 2-Flute / Short
Click on this image to zoom in.
Click on this image to zoom in.
-High-speed steel square cutter with 2 cutting edges and short cutting edge length, where the cutting edge diameter can be specified in 0.01 mm steps
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
- Non-Coated
- 2 Flutes
- S (Short)
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
| Part Number | Minimum order quantity | Volume Discount | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Coating | Overall Length (L) (mm) | No. | Length Under Neck (θ) | |
|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 7 Days | 2.7 ～ 2.99 | 8 | 6 | Non-Coated | 50 | 3 | 15° | ||
| 1 | 7 Days | 3.15 ～ 3.49 | 8 | 8 | Non-Coated | 60 | 3.5 | 15° | ||
| 1 | 7 Days | 3.6 ～ 4 | 8 | 8 | Non-Coated | 60 | 4 | 15° | ||
| 1 | 7 Days | 4.05 ～ 4.5 | 10 | 8 | Non-Coated | 60 | 4.5 | 15° | ||
| 1 | 7 Days | 4.51 ～ 5 | 10 | 8 | Non-Coated | 60 | 5 | 15° | ||
| 1 | 7 Days | 5.01 ～ 5.5 | 12 | 8 | Non-Coated | 60 | 5.5 | 15° | ||
| 1 | 7 Days | 5.51 ～ 6 | 12 | 8 | Non-Coated | 60 | 6 | 15° | ||
| 1 | 7 Days | 6.01 ～ 6.5 | 14 | 10 | Non-Coated | 60 | 6.5 | 15° | ||
| 1 | 7 Days | 6.51 ～ 7 | 14 | 10 | Non-Coated | 60 | 7 | 15° | ||
| 1 | 7 Days | 7.01 ～ 7.5 | 14 | 10 | Non-Coated | 60 | 7.5 | 15° | ||
| 1 | 7 Days | 7.51 ～ 8 | 14 | 10 | Non-Coated | 60 | 8 | 15° | ||
| 1 | 7 Days | 8.01 ～ 8.5 | 18 | 10 | Non-Coated | 70 | 8.5 | 15° | ||
| 1 | 7 Days | 8.51 ～ 9 | 18 | 10 | Non-Coated | 70 | 9 | 15° | ||
| 1 | 7 Days | 9.01 ～ 9.5 | 18 | 10 | Non-Coated | 70 | 9.5 | 15° | ||
| 1 | 7 Days | 9.51 ～ 10 | 18 | 10 | Non-Coated | 70 | 10 | - | ||
| 1 | 7 Days | 10.01 ～ 11 | 22 | 12 | Non-Coated | 80 | 11 | 15° | ||
| 1 | 7 Days | 11.01 ～ 12 | 22 | 12 | Non-Coated | 80 | 12 | - | ||
| 1 | 7 Days | 12.01 ～ 13 | 26 | 12 | Non-Coated | 85 | 13 | - | ||
| 1 | 7 Days | 13.01 ～ 14 | 26 | 16 | Non-Coated | 90 | 14 | 15° | ||
| 1 | 7 Days | 14.01 ～ 14.99 | 30 | 16 | Non-Coated | 95 | 15 | 15° | ||
| 1 | 7 Days | 15.01 ～ 16 | 30 | 16 | Non-Coated | 95 | 16 | - | ||
| 1 | 7 Days | 17 ～ 18 | 34 | 16 | Non-Coated | 95 | 18 | - | ||
| 1 | 7 Days | 18.01 ～ 18.99 | 38 | 20 | Non-Coated | 110 | 19 | 15° | ||
| 1 | 7 Days | 19.01 ～ 19.99 | 38 | 20 | Non-Coated | 110 | 20 | - | ||
| 1 | 7 Days | 20.01 ～ 20.99 | 45 | 20 | Non-Coated | 110 | 21 | - | ||
| 1 | 7 Days | 21 ～ 22 | 45 | 20 | Non-Coated | 110 | 22 | - | ||
| 1 | 7 Days | 22.01 ～ 22.99 | 50 | 25 | Non-Coated | 120 | 23 | 15° | ||
| 1 | 7 Days | 24 ～ 25 | 50 | 25 | Non-Coated | 120 | 25 | - |
Loading...
Specifications
| Model Number | Outer Diameter D 0.01 mm Increment Designation |
Flute Length ℓ |
Under Neck Angle θ |
Overall Length L |
Shank Diameter d |
|
| No. | ||||||
| DEM2S (Non-Coated Type) V-DEM2S (TiCN Coating Type) |
3 | 2.70 ~2.99 | 8 | 15° | 50 | 6 |
| 3.5 | 3.15 ~3.49 | 8 | 15° | 60 | 8 | |
| 4 | 3.60 ~3.99 | 8 | 15° | 60 | 8 | |
| 4.5 | 4.05 ~4.49 | 10 | 15° | 60 | 8 | |
| 5 | 4.51 ~4.99 | 10 | 15° | 60 | 8 | |
| 5.5 | 5.01 ~5.49 | 12 | 15° | 60 | 8 | |
| 6 | 5.51 ~5.99 | 12 | 15° | 60 | 8 | |
| 6.5 | 6.01 ~6.49 | 14 | 15° | 60 | 10 | |
| 7 | 6.51 ~6.99 | 14 | 15° | 60 | 10 | |
| 7.5 | 7.01 ~7.49 | 14 | 15° | 60 | 10 | |
| 8 | 7.51 ~7.99 | 14 | 15° | 60 | 10 | |
| 8.5 | 8.01 ~8.49 | 18 | 15° | 70 | 10 | |
| 9 | 8.51 ~8.99 | 18 | 15° | 70 | 10 | |
| 9.5 | 9.01 ~9.49 | 18 | 15° | 70 | 10 | |
| 10 | 9.51 ~9.99 | 18 | — | 70 | 10 | |
| 11 | 10.01 ~ 10.99 | 22 | 15° | 80 | 12 | |
| 12 | 11.01 ~ 11.99 | 22 | — | 80 | 12 | |
| 13 | 12.01 ~ 12.99 | 26 | — | 85 | 12 | |
| 14 | 13.01 ~ 13.99 | 26 | 15° | 90 | 16 | |
| 15 | 14.01 ~ 14.99 | 30 | 15° | 95 | 16 | |
| 16 | 15.01 ~ 15.99 | 30 | — | 95 | 16 | |
| 18 | 17.01 ~ 17.99 | 34 | — | 95 | 16 | |
| 19 | 18.01 ~ 18.99 | 38 | 15° | 110 | 20 | |
| 20 | 19.01 ~ 19.99 | 38 | — | 110 | 20 | |
| 21 | 20.01 ~ 20.99 | 45 | — | 110 | 20 | |
| 22 | 21.01 ~ 21.99 | 45 | — | 110 | 20 | |
| 23 | 22.01 ~ 22.99 | 50 | 15° | 120 | 25 | |
| 25 | 24.01 ~ 24.99 | 50 | — | 120 | 25 |
For Cutting Conditions, Refer to >>Click here.
Basic information
| Work Material | General Steel / Heat-Treated Steel / Cast Iron / Aluminum / Copper | Type of Flute | Square | Number of Flutes(sheet) | 2 |
|---|---|---|---|---|---|
| Tool Material Type | Cobalt High-Speed Steel | Processing Applications | Flat Surface / Side Surface / Groove / Countersunk | Torsion Angle (θ) | Standard Helix (30 to 40°) |
| Base-Blade Availability | Included | Tolerance(mm) | 0 ~ -0.03 |
Configure
Basic Attributes
-
Outer Diameter (D)(φ)
[2.7-2.99/0.01φ Unit(s)][3.15-3.49/0.01φ Unit(s)][3.6-4/0.01φ Unit(s)][4.05-14.99/0.01φ Unit(s)][15.01-16/0.01φ Unit(s)][17-18.99/0.01φ Unit(s)][19.01-19.99/0.01φ Unit(s)][20.01-22.99/0.01φ Unit(s)][24-25/0.01φ Unit(s)]
-
Flute Length (ℓ)(mm)
-
Shank Diameter (d)(mm)
-
Overall Length (L)(mm)
-
No.
-
Type
- DEM2S
- V-DEM2S
-
Coating
- TiCN
- Non-Coated
Filter by standard shipping days
-
- All
- 7 Days or Less
- 13 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.