High-Speed Steel 0.01 mm Unit Outer Diameter Designated End Mill, 2-Flute / Regular
Click on this image to zoom in.
Click on this image to zoom in.
-High-speed steel square cutter with 2 cutting edges and regular cutting edge length, where the cutting diameter can be specified in 0.01 mm steps
-Can be reground. Please refer to the "Regrinding service" page for information on application procedures, range of services, prices, etc.
- Non-Coated
- 2 Flutes
- R (Regular)
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
| Part Number | Minimum order quantity | Volume Discount | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Coating | Overall Length (L) (mm) | No. | Length Under Neck (θ) | |
|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 7 Days | 2.7 ～ 2.99 | 10 | 6 | Non-Coated | 50 | 3 | 15° | ||
| 1 | 7 Days | 3.15 ～ 3.5 | 12 | 8 | Non-Coated | 60 | 3.5 | 15° | ||
| 1 | 7 Days | 3.6 ～ 3.99 | 12 | 8 | Non-Coated | 60 | 4 | 15° | ||
| 1 | 7 Days | 4.05 ～ 4.49 | 15 | 8 | Non-Coated | 60 | 4.5 | 15° | ||
| 1 | 7 Days | 4.51 ～ 4.99 | 15 | 8 | Non-Coated | 60 | 5 | 15° | ||
| 1 | 7 Days | 5.01 ～ 5.49 | 15 | 8 | Non-Coated | 60 | 5.5 | 15° | ||
| 1 | 7 Days | 5.51 ～ 5.99 | 15 | 8 | Non-Coated | 60 | 6 | 15° | ||
| 1 | 7 Days | 6.01 ～ 6.49 | 20 | 10 | Non-Coated | 60 | 6.5 | 15° | ||
| 1 | 7 Days | 6.51 ～ 6.99 | 20 | 10 | Non-Coated | 60 | 7 | 15° | ||
| 1 | 7 Days | 7.01 ～ 7.49 | 20 | 10 | Non-Coated | 60 | 7.5 | 15° | ||
| 1 | 7 Days | 7.51 ～ 7.99 | 20 | 10 | Non-Coated | 60 | 8 | 15° | ||
| 1 | 7 Days | 8.01 ～ 8.49 | 25 | 10 | Non-Coated | 70 | 8.5 | 15° | ||
| 1 | 7 Days | 8.51 ～ 8.99 | 25 | 10 | Non-Coated | 70 | 9 | 15° | ||
| 1 | 7 Days | 9.01 ～ 9.49 | 25 | 10 | Non-Coated | 70 | 9.5 | 15° | ||
| 1 | 7 Days | 9.51 ～ 9.99 | 25 | 10 | Non-Coated | 70 | 10 | - | ||
| 1 | 7 Days | 10.01 ～ 10.99 | 30 | 12 | Non-Coated | 80 | 11 | 15° | ||
| 1 | 7 Days | 11.01 ～ 11.99 | 30 | 12 | Non-Coated | 80 | 12 | - | ||
| 1 | 7 Days | 12.01 ～ 12.99 | 35 | 12 | Non-Coated | 85 | 13 | - | ||
| 1 | 7 Days | 13.01 ～ 13.99 | 35 | 16 | Non-Coated | 90 | 14 | 15° | ||
| 1 | 7 Days | 14.01 ～ 14.99 | 40 | 16 | Non-Coated | 95 | 15 | 15° | ||
| 1 | 7 Days | 15.01 ～ 15.99 | 40 | 16 | Non-Coated | 95 | 16 | - | ||
| 1 | 7 Days | 17.01 ～ 17.99 | 40 | 16 | Non-Coated | 95 | 18 | - | ||
| 1 | 7 Days | 18.01 ～ 18.99 | 45 | 20 | Non-Coated | 110 | 19 | 15° | ||
| 1 | 7 Days | 19.01 ～ 19.99 | 45 | 20 | Non-Coated | 110 | 20 | - | ||
| 1 | 7 Days | 24.01 ～ 24.99 | 60 | 25 | Non-Coated | 130 | 25 | - | ||
| 1 | 13 Days | 2.7 ～ 2.99 | 10 | 6 | TiCN | 50 | 3 | 15° | ||
| 1 | 13 Days | 3.15 ～ 3.49 | 12 | 8 | TiCN | 60 | 3.5 | 15° | ||
| 1 | 13 Days | 3.6 ～ 3.99 | 12 | 8 | TiCN | 60 | 4 | 15° | ||
| 1 | 13 Days | 4.05 ～ 4.49 | 15 | 8 | TiCN | 60 | 4.5 | 15° | ||
| 1 | 13 Days | 4.51 ～ 4.99 | 15 | 8 | TiCN | 60 | 5 | 15° | ||
| 1 | 13 Days | 5.01 ～ 5.49 | 15 | 8 | TiCN | 60 | 5.5 | 15° | ||
| 1 | 13 Days | 5.51 ～ 5.99 | 15 | 8 | TiCN | 60 | 6 | 15° | ||
| 1 | 13 Days | 6.01 ～ 6.49 | 20 | 10 | TiCN | 60 | 6.5 | 15° | ||
| 1 | 13 Days | 6.51 ～ 6.99 | 20 | 10 | TiCN | 60 | 7 | 15° | ||
| 1 | 13 Days | 7.01 ～ 7.49 | 20 | 10 | TiCN | 60 | 7.5 | 15° | ||
| 1 | 13 Days | 7.51 ～ 7.99 | 20 | 10 | TiCN | 60 | 8 | 15° | ||
| 1 | 13 Days | 8.01 ～ 8.49 | 25 | 10 | TiCN | 70 | 8.5 | 15° | ||
| 1 | 13 Days | 8.51 ～ 8.99 | 25 | 10 | TiCN | 70 | 9 | 15° | ||
| 1 | 13 Days | 9.01 ～ 9.49 | 25 | 10 | TiCN | 70 | 9.5 | 15° | ||
| 1 | 13 Days | 9.51 ～ 9.99 | 25 | 10 | TiCN | 70 | 10 | - | ||
| 1 | 13 Days | 10.01 ～ 10.99 | 30 | 12 | TiCN | 80 | 11 | 15° | ||
| 1 | 13 Days | 11.01 ～ 11.99 | 30 | 12 | TiCN | 80 | 12 | - | ||
| 1 | 13 Days | 12.01 ～ 12.99 | 35 | 12 | TiCN | 85 | 13 | - | ||
| 1 | 13 Days | 13.01 ～ 13.99 | 35 | 16 | TiCN | 90 | 14 | 15° | ||
| 1 | 13 Days | 14.01 ～ 14.99 | 40 | 16 | TiCN | 95 | 15 | 15° | ||
| 1 | 13 Days | 15.01 ～ 15.99 | 40 | 16 | TiCN | 95 | 16 | - | ||
| 1 | 13 Days | 17.01 ～ 17.99 | 40 | 16 | TiCN | 95 | 18 | - | ||
| 1 | 13 Days | 18.01 ～ 18.99 | 45 | 20 | TiCN | 110 | 19 | 15° | ||
| 1 | 13 Days | 19.01 ～ 19.99 | 45 | 20 | TiCN | 110 | 20 | - | ||
| 1 | 13 Days | 24.01 ～ 24.99 | 60 | 25 | TiCN | 130 | 25 | - |
Loading...
Specifications
| Model Number | Outer Diameter D 0.01 mm Increment Designation |
Flute Length ℓ |
Under Neck Angle θ |
Overall Length L |
Shank Diameter d |
|
| No. | ||||||
| DEM2R (Non-Coated Type) V-DEM2R (TiCN Coating Type) |
3 | 2.70 ~2.99 | 10 | 15° | 50 | 6 |
| 3.5 | 3.15 ~3.49 | 12 | 15° | 60 | 8 | |
| 4 | 3.60 ~3.99 | 12 | 15° | 60 | 8 | |
| 4.5 | 4.05 ~4.49 | 15 | 15° | 60 | 8 | |
| 5 | 4.51 ~4.99 | 15 | 15° | 60 | 8 | |
| 5.5 | 5.01 ~5.49 | 15 | 15° | 60 | 8 | |
| 6 | 5.51 ~5.99 | 15 | 15° | 60 | 8 | |
| 6.5 | 6.01 ~6.49 | 20 | 15° | 60 | 10 | |
| 7 | 6.51 ~6.99 | 20 | 15° | 60 | 10 | |
| 7.5 | 7.01 ~7.49 | 20 | 15° | 60 | 10 | |
| 8 | 7.51 ~7.99 | 20 | 15° | 60 | 10 | |
| 8.5 | 8.01 ~8.49 | 25 | 15° | 70 | 10 | |
| 9 | 8.51 ~8.99 | 25 | 15° | 70 | 10 | |
| 9.5 | 9.01 ~9.49 | 25 | 15° | 70 | 10 | |
| 10 | 9.51 ~9.99 | 25 | — | 70 | 10 | |
| 11 | 10.01 ~ 10.99 | 30 | 15° | 80 | 12 | |
| 12 | 11.01 ~ 11.99 | 30 | — | 80 | 12 | |
| 13 | 12.01 ~ 12.99 | 35 | — | 85 | 12 | |
| 14 | 13.01 ~ 13.99 | 35 | 15° | 90 | 16 | |
| 15 | 14.01 ~ 14.99 | 40 | 15° | 95 | 16 | |
| 16 | 15.01 ~ 15.99 | 40 | — | 95 | 16 | |
| 18 | 17.01 ~ 17.99 | 40 | — | 95 | 16 | |
| 19 | 18.01 ~ 18.99 | 45 | 15° | 110 | 20 | |
| 20 | 19.01 ~ 19.99 | 45 | — | 110 | 20 | |
| 25 | 24.01 ~ 24.99 | 60 | — | 130 | 25 |
For Cutting Conditions, Refer to >>Click here.
Basic information
| Work Material | General Steel / Heat-Treated Steel / Cast Iron / Aluminum / Copper | Type of Flute | Square | Number of Flutes(sheet) | 2 |
|---|---|---|---|---|---|
| Tool Material Type | Cobalt High-Speed Steel | Processing Applications | Flat Surface / Side Surface / Groove / Countersunk | Torsion Angle (θ) | Standard Helix (30 to 40°) |
| Base-Blade Availability | Included | Tolerance(mm) | 0 ~ -0.03 |
Configure
Basic Attributes
-
Outer Diameter (D)(φ)
[2.7-2.99/0.01φ Unit(s)][3.15-3.5/0.01φ Unit(s)][3.6-3.99/0.01φ Unit(s)][4.05-4.49/0.01φ Unit(s)][4.51-4.99/0.01φ Unit(s)][5.01-5.49/0.01φ Unit(s)][5.51-5.99/0.01φ Unit(s)][6.01-6.49/0.01φ Unit(s)][6.51-6.99/0.01φ Unit(s)][7.01-7.49/0.01φ Unit(s)][7.51-7.99/0.01φ Unit(s)][8.01-8.49/0.01φ Unit(s)][8.51-8.99/0.01φ Unit(s)][9.01-9.49/0.01φ Unit(s)][9.51-9.99/0.01φ Unit(s)][10.01-10.99/0.01φ Unit(s)][11.01-11.99/0.01φ Unit(s)][12.01-12.99/0.01φ Unit(s)][13.01-13.99/0.01φ Unit(s)][14.01-14.99/0.01φ Unit(s)][15.01-15.99/0.01φ Unit(s)][17.01-17.99/0.01φ Unit(s)][18.01-18.99/0.01φ Unit(s)][19.01-19.99/0.01φ Unit(s)][24.01-24.99/0.01φ Unit(s)]
-
Flute Length (ℓ)(mm)
-
Shank Diameter (d)(mm)
-
Coating
- TiCN
- Non-Coated
-
Overall Length (L)(mm)
-
No.
-
Type
- DEM2R
- V-DEM2R
Filter by standard shipping days
-
- All
- 7 Days or Less
- 13 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.