Carbide 2-Flute Square Alterations End Mill
Click on this image to zoom in.
Click on this image to zoom in.
- Volume Discount
- TS
- General Steel
- 2 Flutes
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Geometry | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Figure | |
|---|---|---|---|---|---|---|---|---|---|---|
18.77 € | 1 | Available | 9 Days | 4 | 6 | Sharp Corner | 6 | 45 | 1 | |
18.38 € | 1 | Available | 9 Days | 5 | 7.5 | Sharp Corner | 6 | 45 | 1 | |
18.48 € | 1 | Available | 9 Days | 6 | 9 | Sharp Corner | 6 | 45 | 2 | |
30.16 € | 1 | Available | 9 Days | 8 | 12 | Sharp Corner | 8 | 60 | 2 | |
47.71 € | 1 | Available | 9 Days | 10 | 15 | Sharp Corner | 10 | 70 | 2 | |
54.87 € | 1 | Available | 9 Days | 12 | 18 | Sharp Corner | 12 | 75 | 2 | |
87.33 € | 1 | Available | 9 Days | 14 | 21 | Sharp Corner | 12 | 75 | 3 | |
92.54 € | 1 | Available | 9 Days | 16 | 24 | Sharp Corner | 16 | 100 | 2 | |
157.99 € | 1 | Available | 9 Days | 20 | 30 | Sharp Corner | 20 | 105 | 2 | |
32.33 € | 1 | Available | 9 Days | 4 | 16 | Sharp Corner | 6 | 60 | 1 | |
32.33 € | 1 | Available | 9 Days | 4.5 | 18 | Sharp Corner | 6 | 60 | 1 | |
35.89 € | 1 | Available | 9 Days | 5 | 20 | Sharp Corner | 6 | 60 | 1 | |
35.89 € | 1 | Available | 9 Days | 5.5 | 22 | Sharp Corner | 6 | 60 | 1 | |
32.36 € | 1 | Available | 9 Days | 6 | 24 | Sharp Corner | 6 | 60 | 2 | |
59.40 € | 1 | Available | 9 Days | 8 | 32 | Sharp Corner | 8 | 100 | 2 | |
71.75 € | 1 | Available | 9 Days | 10 | 40 | Sharp Corner | 10 | 100 | 2 | |
99.52 € | 1 | Available | 9 Days | 12 | 48 | Sharp Corner | 12 | 100 | 2 | |
18.31 € | 1 | Available | 9 Days | 4 | 12 | Sharp Corner | 6 | 50 | 1 | |
50.85 € | 1 | Available | 9 Days | 4.5 | 13.5 | Sharp Corner | 6 | 50 | 1 | |
19.10 € | 1 | Available | 9 Days | 5 | 15 | Sharp Corner | 6 | 55 | 1 | |
35.87 € | 1 | Available | 9 Days | 5.5 | 16.5 | Sharp Corner | 6 | 55 | 1 | |
21.41 € | 1 | Available | 9 Days | 6 | 18 | Sharp Corner | 6 | 60 | 2 | |
45.96 € | 1 | Available | 9 Days | 7 | 21 | Sharp Corner | 8 | 65 | 1 | |
37.87 € | 1 | Available | 9 Days | 8 | 24 | Sharp Corner | 8 | 70 | 2 | |
73.33 € | 1 | Available | 9 Days | 9 | 27 | Sharp Corner | 10 | 75 | 1 | |
47.28 € | 1 | Available | 9 Days | 10 | 30 | Sharp Corner | 10 | 80 | 2 | |
61.09 € | 1 | Available | 9 Days | 12 | 36 | Sharp Corner | 12 | 85 | 2 | |
99.32 € | 1 | Available | 9 Days | 14 | 42 | Sharp Corner | 12 | 95 | 3 | |
122.22 € | 1 | Available | 9 Days | 16 | 48 | Sharp Corner | 16 | 110 | 2 | |
175.71 € | 1 | Available | 9 Days | 20 | 60 | Sharp Corner | 20 | 130 | 2 | |
30.44 € | 1 | Available | 9 Days | 4 | 14 | Sharp Corner | 6 | 50 | 1 | |
34.48 € | 1 | Available | 9 Days | 5 | 17.5 | Sharp Corner | 6 | 55 | 1 | |
36.12 € | 1 | Available | 9 Days | 6 | 21 | Sharp Corner | 6 | 60 | 2 | |
60.04 € | 1 | Available | 9 Days | 8 | 28 | Sharp Corner | 8 | 70 | 2 | |
72.82 € | 1 | Available | 9 Days | 10 | 35 | Sharp Corner | 10 | 80 | 2 | |
97.50 € | 1 | Available | 9 Days | 12 | 42 | Sharp Corner | 12 | 95 | 2 | |
19.66 € | 1 | Available | 9 Days | 4 | 8 | Sharp Corner | 6 | 45 | 1 | |
33.25 € | 1 | Available | 9 Days | 4.5 | 9 | Sharp Corner | 6 | 45 | 1 | |
17.25 € | 1 | Available | 9 Days | 5 | 10 | Sharp Corner | 6 | 45 | 1 | |
27.58 € | 1 | Available | 9 Days | 5.5 | 11 | Sharp Corner | 6 | 45 | 1 | |
19.66 € | 1 | Available | 9 Days | 6 | 12 | Sharp Corner | 6 | 45 | 2 | |
35.03 € | 1 | Available | 9 Days | 8 | 16 | Sharp Corner | 8 | 55 | 2 | |
63.77 € | 1 | Available | 9 Days | 9 | 18 | Sharp Corner | 10 | 60 | 1 | |
76.68 € | 1 | Available | 9 Days | 10 | 20 | Sharp Corner | 10 | 65 | 2 | |
57.09 € | 1 | Available | 9 Days | 12 | 24 | Sharp Corner | 12 | 75 | 2 | |
84.21 € | 1 | Available | 9 Days | 14 | 28 | Sharp Corner | 12 | 80 | 3 | |
96.91 € | 1 | Available | 9 Days | 16 | 32 | Sharp Corner | 16 | 105 | 2 | |
158.97 € | 1 | Available | 9 Days | 20 | 40 | Sharp Corner | 20 | 110 | 2 | |
20.07 € | 1 | Available | 9 Days | 4 | 10 | Sharp Corner | 6 | 50 | 1 | |
24.30 € | 1 | Available | 9 Days | 5 | 12.5 | Sharp Corner | 6 | 55 | 1 | |
23.02 € | 1 | Available | 9 Days | 6 | 15 | Sharp Corner | 6 | 60 | 2 | |
35.91 € | 1 | Available | 9 Days | 8 | 20 | Sharp Corner | 8 | 70 | 2 | |
40.41 € | 1 | Available | 9 Days | 10 | 25 | Sharp Corner | 10 | 80 | 2 | |
61.59 € | 1 | Available | 9 Days | 12 | 30 | Sharp Corner | 12 | 85 | 2 |
Loading...
Specification Table
| Blade Diameter D (Selection) | -CR/-CC 0.1 mm Unit Specification | -MK 5° Unit Specification |
| 2 to 2.8 | No Standard | No Standard |
| 3, 3.5 | 60° to 135° | |
| 4, 4.5 | 0.1 to (D-2)/2 | |
| 5, 5.5 | ||
| 6, 7 | ||
| 8, 9 | 0.1 to 3.0 | |
| 10 | ||
| 12 | ||
| 14 | ||
| 16 | ||
| 20 |
[ ! ] For the standards of blade diameter (D), blade length (ℓ) and overall length (L), refer to the target model number page.
[ ! ] Bottom blade polishing is provided when machining the radius, corner C, and bottom blade flat.
[ ! ] The blade length (ℓ) and overall length (L) will be shorter by about Dx0.5 (up to 5 mm) when blade tip shape machining is performed.
Click here for cutting conditions
Blade Diameter Specification -PP
| Nominal No. | -PP 0.01 mm Unit Specification |
| 4 | 3.70 to 3.99 |
| 4.5 | 4.01 to 4.49 |
| 5 | 4.51 to 4.99 |
| 5.5 | 5.01 to 5.49 |
| 6 | 5.51 to 5.99 |
| 7 | 6.51 to 6.99 |
| 8 | 7.51 to 7.99 |
| 9 | 8.51 to 8.99 |
| 10 | 9.51 to 9.99 |
| 12 | 11.51 to 11.99 |
| 14 | 13.51 to 13.99 |
| 16 | 15.51 to 15.99 |
| 20 | 19.51 to 19.99 |
Click here for cutting conditions
Shank Additional Work -KN / -LC
| Blade Diameter D (Selection) | Under-Neck Length Specification -KN 1 mm Unit Specification | Overall Length Specification -LC 1 mm Unit Specification | Fig. |
| 2 to 5.5 | KN ≥ ℓ+5 and KN ≤ L-23 | LC ≥ ℓ+10+3d | 1 |
| 6 | KN ≥ ℓ+5 and KN ≤ L-3d | 2 | |
| 7 | 1 | ||
| 8 | 2 | ||
| 9 | 1 | ||
| 10 | 2 | ||
| 12 | LC ≥ ℓ+D+3d | ||
| 16 | |||
| 20 |
[ ! ] For the standards of blade length (ℓ), overall length (L) and shank diameter (d), refer to the target model number page.
[ ! ] Specify within the range of LC ≥ KN+3d+5 when using both the under-neck length (KN) and overall length (LC) specifications.
[ ! ] When specifying the under-neck length (KN), the blade diameter of the shank relief will be -0.2 to 0.5 mm.
Click here for cutting conditions
■ Additional machining charges will be added to the unit price of the target model number.
■ When additional machining menus are combined, the respective additional machining charges will be added.
■ The quantity slide is applicable only to the target model number.
(Depending on the quantity, an estimate may be provided for the delivery date)
Specifications/Overview
| Applicable Model Number | Blade length ℓ | ||
| Gash Land | Sharp-Corner | ||
| TSC-SH-EM2B | TSC-SH-PEM2B | 1D | Click here for product details |
| TSC-EM2B | TSC-PEM2B | 1.5D | Click here for product details |
| TSC-EM2S | TSC-PEM2S | 2D | Click here for product details |
| TSC-EM2SR | TSC-PEM2SR | 2.5D | Click here for product details |
| TSC-EM2R | TSC-PEM2R | 3D | Click here for product details |
| TSC-EM2RL | TSC-PEM2RL | 3.5D | Click here for product details |
| TSC-EM2L | TSC-PEM2L | 4D | Click here for product details |
Alterations
Basic information
| Work Material | General Steel / Heat-Treated Steel / Stainless Steel / Cast Iron / Aluminum / Copper | Model | Square | Number of Flutes(sheet) | 2 |
|---|---|---|---|---|---|
| Processing Applications | Flat Surface / Side Surface / Groove / Inclined Cutting / Countersunk | Coating | For High Hardness (Silicone-Based) | Torsion Angle (θ) | Standard Helix (30 to 40°) |
| Tolerance of OD(mm) | 0 ~ -0.02 |
Configure
Basic Attributes
-
Outer Diameter (D)(φ)
-
Flute Length (ℓ)(mm)
-
Shank Diameter (d)(mm)
-
Overall Length (L)(mm)
-
Type
- T-TSC-EM2B
- T-TSC-EM2L
- T-TSC-EM2R
- T-TSC-EM2RL
- T-TSC-EM2S
- T-TSC-EM2SR
- T-TSC-PEM2B
- T-TSC-PEM2L
- T-TSC-PEM2R
- T-TSC-PEM2RL
- T-TSC-PEM2S
- T-TSC-PEM2SR
-
Geometry
- Sharp Corner
- With Lead
Filter by standard shipping days
-
- All
- 9 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.