Carbide Burnishing Drill, Stepped Model
Click on this image to zoom in.
Click on this image to zoom in.
-No complicated estimations required. It is possible to order the part number of the step drill without drawings
.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
| Part Number | Minimum order quantity | Volume Discount | Overall Length L (mm) | No. | Single Angle (θ) (°) | Groove Length (ℓ) (mm) | Groove Length (ℓ1) (mm) | Large Diameter (D1) (mm) | Tip Diameter (D) (mm) | Shank Diameter d | Tolerance of Shank Diameter | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 8 Days | 40 | 3 | 30 ～ 90 | 1 ～ 5 | 3 ～ 10 | 1.01 ～ 3 | 1 ～ 1.99 | 3 | 0 ~ -0.006 | ||
| 1 | 8 Days | 50 | 4 | 30 ～ 90 | 2 ～ 10 | 4 ～ 20 | 2.01 ～ 4 | 2 ～ 2.99 | 4 | 0 ~ -0.008 | ||
| 1 | 8 Days | 60 | 6 | 30 ～ 90 | 3 ～ 15 | 5 ～ 30 | 3.01 ～ 6 | 3 ～ 3.99 | 6 | 0 ~ -0.008 |
Loading...
Specifications
| Model Number | Tip Diameter D 0.01 mm Increment Designation | Groove Length ℓ 0.1 mm Increment Designation | Single Angle θ 1° Increment Designation | Large Diameter D1 0.01 mm Increment Designation | Groove Length ℓ1 0.1 mm Increment Designation | Overall Length L | Shank Diameter d | |
| No. | ||||||||
| BUNDRS | 3 | 1.00 ~ 1.99 | 1.0 ~ 5.0 | 30 ~ 90 | D < D1 ≤ 3.00 | ℓ + 2 ≤ ℓ1 ≤ 10 | 40 | 3 |
| 4 | 2.00 ~ 2.99 | 2.0 ~ 10.0 | 30 ~ 90 | D < D1 ≤ 4.00 | ℓ + 2 ≤ ℓ1 ≤ 20 | 50 | 4 | |
| 6 | 3.00 ~ 3.60 | 3.0 ~ 12.0 | 30 ~ 90 | 4.01 ~ 6.00 | ℓ + 2 ≤ ℓ1 ≤ 25 | 60 | 6 |
For Cutting Conditions, Refer to >>Click here.
Basic information
| work material | Cast Iron / Aluminum / Copper | Tool Material Type | Carbide | Shank Type | End Mill Shank |
|---|---|---|---|---|---|
| Coating Y/N | None | With/without Oil Hole | None | Point Angle(°) | 120 |
| Thinning | None |
Configure
Basic Attributes
-
Overall Length L(mm)
-
No.
- 3
- 4
- 6
-
Single Angle (θ)(°)
-
Groove Length (ℓ)(mm)
-
Groove Length (ℓ1)(mm)
-
Large Diameter (D1)(mm)
-
Tip Diameter (D)(mm)
-
Type
- BUNDRS
Filter by standard shipping days
-
- All
- 8 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.