TiAlN Coated Powdered High-Speed Steel Drill, End Mill Shank / Regular Model (Part Numbers)
- Volume Discount
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
APM-ESDR6.9
Part Number
|
|---|
| APM-ESDR6.9 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Hole diameter (drill diameter) D (mm) | Groove Length L (mm) | Overall Length L (mm) | With/without Oil Hole | Shank Diameter d | Diameter Tolerance | Tolerance of Shank Diameter | |
|---|---|---|---|---|---|---|---|---|---|---|---|
38.69 € | 1 | Available | 5 Days | 6.9 | 69 | 113 | None | 8 | 0 ~ -0.022 | 0 ~ -0.022 |
Loading...
Specifications
Model Number
APM-ESDR (No oil hole) / APM-HESDR (With oil hole)
| Diameter D | Groove Length ℓ | Overall Length L | Shank Diameter d |
| 2 | 24 | 56 | 3 |
| 2.5 | 30 | 62 | 3 |
| 3 | 33 | 65 | 3 |
| 3.3 | 36 | 68 | 4 |
| 3.5 | 39 | 71 | 4 |
| 3.8 | 43 | 75 | 4 |
| 4 | 43 | 75 | 4 |
| 4.2 | 43 | 87 | 6 |
| 4.3 | 47 | 91 | 6 |
| 4.5 | 47 | 91 | 6 |
| 4.8 | 52 | 96 | 6 |
| 5 | 52 | 96 | 6 |
| 5.1 | 52 | 96 | 6 |
| 5.5 | 57 | 101 | 6 |
| 6 | 57 | 101 | 6 |
| 6.5 | 63 | 107 | 8 |
| 6.7 | 63 | 107 | 8 |
| 6.8 | 69 | 113 | 8 |
| 6.9 | 69 | 113 | 8 |
| 7 | 69 | 113 | 8 |
| 7.8 | 75 | 119 | 8 |
| 8 | 75 | 119 | 8 |
| 8.1 | 75 | 125 | 10 |
| 8.2 | 75 | 125 | 10 |
| 8.5 | 75 | 125 | 10 |
| 8.6 | 81 | 131 | 10 |
| 8.7 | 81 | 131 | 10 |
| 9 | 81 | 131 | 10 |
| 9.5 | 81 | 131 | 10 |
| 9.8 | 87 | 137 | 10 |
| 10 | 87 | 137 | 10 |
| 10.2 | 87 | 144 | 12 |
| 10.3 | 87 | 144 | 12 |
| 10.4 | 87 | 144 | 12 |
| 10.5 | 87 | 144 | 12 |
| 11 | 94 | 151 | 12 |
| 11.5 | 94 | 151 | 12 |
| 12 | 101 | 158 | 12 |
| 12.5 | 101 | 161 | 14 |
| 13 | 101 | 161 | 14 |
For Cutting Conditions, Refer to >>Click here.
More Information
●A drill with a good balance between wear resistance and fracture toughness due to a combination of high-speed steel powder + TiAℓN coating.
●Deep holes can now be drilled very efficiently thanks to a special drill geometry.
Basic information
| work material | General Steel / Heat-Treated Steel / Stainless Steel / Cast Iron / Aluminum / Copper | Tool Material Type | Powdered High-Speed Steel | Shank Type | End Mill Shank |
|---|---|---|---|---|---|
| Coating Y/N | Included | Coating Type | TiAlN | Point Angle(°) | 130 |
| Thinning | Included |
This page is TiAlN Coated Powdered High-Speed Steel Drill, End Mill Shank / Regular Model, part number APM-ESDR6.9.
You can find the detail information about specifications and dimensions on part number APM-ESDR6.9.
Configure
Basic Attributes
-
Type
- APM-ESDR
- APM-HESDR
-
Hole diameter (drill diameter) D(mm)
-
Groove Length L(mm)
-
Overall Length L(mm)
-
With/without Oil Hole
- Included
- None
Filter by standard shipping days
-
- All
- 5 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Variation of this product
| Part Number |
|---|
| APM-ESDR10.5 |
| APM-ESDR11 |
| APM-ESDR11.5 |
| APM-ESDR7 |
| APM-ESDR7.8 |
| APM-ESDR8 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | Hole diameter (drill diameter) D (mm) | Groove Length L (mm) | Overall Length L (mm) | With/without Oil Hole | Shank Diameter d | Diameter Tolerance | Tolerance of Shank Diameter |
|---|---|---|---|---|---|---|---|---|---|---|---|
66.33 € | 1 | Available | 5 Days | 10.5 | 87 | 144 | None | 12 | 0 ~ -0.027 | 0 ~ -0.027 | |
72.70 € | 1 | Available | 5 Days | 11 | 94 | 151 | None | 12 | 0 ~ -0.027 | 0 ~ -0.027 | |
79.70 € | 1 | Available | 5 Days | 11.5 | 94 | 151 | None | 12 | 0 ~ -0.027 | 0 ~ -0.027 | |
38.69 € | 1 | Available | 5 Days | 7 | 69 | 113 | None | 8 | 0 ~ -0.022 | 0 ~ -0.022 | |
43.00 € | 1 | Available | 5 Days | 7.8 | 75 | 119 | None | 8 | 0 ~ -0.022 | 0 ~ -0.022 | |
43.00 € | 1 | Available | 5 Days | 8 | 75 | 119 | None | 8 | 0 ~ -0.022 | 0 ~ -0.022 |
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.