TiN Coated High-Speed Steel Roll Tap【5 Pieces Per Package】
Click on this image to zoom in.
Click on this image to zoom in.
-Used for tapping that produces no chips
-Suitable for a wide range of materials, from general steel to non-ferrous alloys
-Excellent abrasion resistance and chip weld resistance due to TiN coating.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
Part Number
|
|---|
| G-ROT-M8-1.25-2 |
| G-ROT-M8-1.25-4 |
| Part Number |
Standard Unit Price
| Number of pc(s). included in pkg. | Minimum order quantity | Volume Discount | Nominal | Pitch, Number of Threads (mm) | Number of Chamfered Threads | Overall Length (L) (mm) | Thread Length | Shank Diameter (φ) | Length Under Neck (mm) | Precision | Square Part Length (mm) | Square Part Width (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
92.66 € | 5 Pieces Per Package | 1 pack | 5 Days | M8 | 1.25 | 2 P | 70 | 22 | 6.2 | 35 | RM7 | 8 | 5 | ||
92.66 € | 5 Pieces Per Package | 1 pack | 5 Days | M8 | 1.25 | 4 P | 70 | 22 | 6.2 | 35 | RM7 | 8 | 5 |
Loading...
Specifications
Model Number
G-ROT
1 Pack 5 Pieces Included
| Nominal M x P |
Chamfer Lcf (Selection) |
Precision | Overall Length L |
Thread Length Lc |
Length Under Neck L1 |
Shank Diameter d |
Square Part Length Lk |
Square Part Width K |
Quantity/ pack |
|
| M2 | 0.4 | 4 | RM4 | 40 | 9 | - | 3. | 5 | 2.5 | 5 Pieces |
| M3 | 0.5 | 2 4 |
RM5 | 46 | 9 | 18 | 4. | 6 | 3.2 | |
| M4 | 0.7 | RM6 | 52 | 10 | 20 | 5. | 7 | 4. | ||
| M5 | 0.8 | RM6 | 60 | 11 | 22 | 5.5 | 7 | 4.5 | ||
| M6 | 1 | RM7 | 62 | 12 | 24 | 6. | 7 | 4.5 | ||
| M8 | 1.25 | RM7 | 70 | 22 | 35 | 6.2 | 8 | 5. | ||
| M10 | 1.5 | RM7 | 75 | 24 | 39 | 7. | 8 | 5.5 | ||
[ ! ]This product is only sold in units of packs.
[ ! ]M6 or below (depth of bite 4 only) have protruding centers.
[ ! ]The pilot hole diameter for a roll tap is different from that of a cutting tap.
[ ! ]For details about roll tapping accuracy RM, refer to the technical information (>>Click here).
For Cutting Conditions, Refer to >>Click here.
More Information
● It is used as a thread forming tap that does not discharge cuttings.
● Supports a wide range of work materials ranging from general steel to non-ferrous alloys.
● The TiN coating provides excellent wear resistance and welding resistance.
Basic information
| Thread Types | Meter | Tool Material Type | Vanadium High-Speed Steel | Work Material | Low-Carbon Steel (C Content of 0.25% or Less) / Medium-Carbon Steel (C Content 0.25 - 0.45%) / High-Carbon Steel (C Content Exceeding 0.45%) / Alloy Steel (SCM) / Stainless Steel (SUS) / Copper (Cu) / Brass (Bs) / Brass Cast Iron (BsC) / Bronze (PB) / Rolled Aluminum Material (AL) |
|---|---|---|---|---|---|
| Tap Model | Rolled Tap | Bore Model | For Through Holes / For Blind Holes | Coating Presence | Included |
| Surface treatment | TiN | Quantity/Pack | 5 Piece |
Configure
Basic Attributes
-
Pitch, Number of Threads(mm)
-
Number of Chamfered Threads
-
Overall Length (L)(mm)
-
Thread Length
-
Shank Diameter(φ)
-
Length Under Neck(mm)
-
Precision
-
Square Part Length(mm)
-
Square Part Width(mm)
-
Type
- G-ROT
-
Nominal
Filter by standard shipping days
-
- All
- 5 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.