VAC Series Carbide 2-Flute Radius End Mill (Part Numbers)
- Volume Discount
-Cutting edge radius also reinforced cutting edge rigid
-Ultra-fine particle carbide base material and coating with excellent adhesion and heat resistance are adopted
-Can handle heat treated steel up to 50HRC
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
VAC-CR-EM2R12-R1
Part Number
|
|---|
| VAC-CR-EM2R12-R1 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Outer Diameter (D) (φ) | R Size (mm) | Flute Length (ℓ) (mm) | Overall Length (L) (mm) | Shank Diameter (d) (mm) | Figure | |
|---|---|---|---|---|---|---|---|---|---|---|
153.12 € | 1 | Available | 5 Days | 12 | 1 | 30 | 110 | 12 | 2 |
Loading...
Specifications
Model Number
VAC-CR-EM2R
| Flute Diameter D | Radius R | Overall Length L | Overall Length L | Blade Length ℓ | Shank Diameter d | Figure | ||||||
| 1 | 0.1 | 0.2 | - | 50 | 2.5 | 6 | 1 | |||||
| 1.5 | 0.2 | 0.3 | - | 50 | 4 | 6 | 1 | |||||
| 2 | 0.2 | 0.3 | 0.5 | - | 50 | 6 | 6 | 1 | ||||
| 3 | 0.1 | 0.2 | 0.3 | 0.5 | - | 60 | 8 | 6 | 1 | |||
| 4 | 0.2 | 0.3 | 0.5 | 1 | - | 70 | 10 | 6 | 1 | |||
| 5 | 1 | - | 90 | 13 | 6 | 1 | ||||||
| 6 | 0.5 | 60 | 60 | 15 | 6 | 2 | ||||||
| 0.1 | 0.2 | 0.3 | 0.5 | 1 | - | 90 | 15 | 6 | 2 | |||
| 8 | 0.5 | 70 | 70 | 20 | 8 | 2 | ||||||
| 0.2 | 0.5 | 1 | 2 | - | 100 | 20 | 8 | 2 | ||||
| 10 | 0.2 | 0.3 | 0.5 | 1 | 2 | - | 100 | 25 | 10 | 2 | ||
| 12 | 0.5 | 1 | 80 | 80 | 30 | 12 | 2 | |||||
| 0.2 | 0.3 | 0.5 | 1 | 2 | 3 | - | 110 | 30 | 12 | 2 | ||
| 1 | 130 | 130 | 30 | 12 | 2 | |||||||
Example of Use
● The standard with a small R tolerance has been adopted.
● Capable of high-hardness machining up to 55 HRC.
[ ! ]The electrical conductivity is minimal.
Basic information
| Work Material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Stainless Steel / Cast Iron / Aluminum Alloy / Copper Alloy | Number of Flutes(sheet) | 2 | Model | Radius |
|---|---|---|---|---|---|
| Processing Applications | Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) / Inclined Cutting |
This page is VAC Series Carbide 2-Flute Radius End Mill, part number VAC-CR-EM2R12-R1.
You can find the detail information about specifications and dimensions on part number VAC-CR-EM2R12-R1.
Configure
Basic Attributes
-
Type
- VAC-CR-EM2R
-
Outer Diameter (D)(φ)
-
R Size(mm)
-
Flute Length (ℓ)(mm)
-
Overall Length (L)(mm)
-
Shank Diameter (d)(mm)
Filter by standard shipping days
-
- All
- 5 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Variation of this product
| Part Number |
|---|
| VAC-CR-EM2R1.5-R0.3 |
| VAC-CR-EM2R10-R0.2 |
| VAC-CR-EM2R10-R0.3 |
| VAC-CR-EM2R12-R1-130 |
| VAC-CR-EM2R12-R1-80 |
| VAC-CR-EM2R12-R2 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | Outer Diameter (D) (φ) | R Size (mm) | Flute Length (ℓ) (mm) | Overall Length (L) (mm) | Shank Diameter (d) (mm) | Figure |
|---|---|---|---|---|---|---|---|---|---|---|
55.34 € | 1 | Available | 5 Days | 1.5 | 0.3 | 4 | 50 | 6 | 1 | |
94.74 € | 1 | Available | 5 Days | 10 | 0.2 | 25 | 100 | 10 | 2 | |
94.74 € | 1 | Available | 5 Days | 10 | 0.3 | 25 | 100 | 10 | 2 | |
167.41 € | 1 | Available | 5 Days | 12 | 1 | 30 | 130 | 12 | 2 | |
116.63 € | 1 | Available | 5 Days | 12 | 1 | 30 | 80 | 12 | 2 | |
164.62 € | 1 | Available | 5 Days | 12 | 2 | 30 | 110 | 12 | 2 |
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.