VAC Series Carbide 4-Flute Uneven Lead Radius End Mill (Part Numbers)
- Volume Discount
-Suppresses chatter in uneven pitch and uneven flutes
-Stable machining is possible while maintaining finished surface accuracy
-Cutting edge radius also enhances cutting edge rigidity
-Can machine heat treated steel up to 50HRC
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
VAC-CR-VHEM4R10-R0.2-100
Part Number
|
|---|
| VAC-CR-VHEM4R10-R0.2-100 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Outer Diameter (D) (φ) | R Size (mm) | Flute Length (ℓ) (mm) | Overall Length (L) (mm) | Shank Diameter (d) (mm) | Figure | |
|---|---|---|---|---|---|---|---|---|---|---|
94.74 € | 1 | Available | 5 Days | 10 | 0.2 | 25 | 100 | 10 | 2 |
Loading...
Specifications
Model Number
VAC-CR-VHEM4R
| Flute Diameter D | Radius R | Overall Length L | Overall Length L | Blade Length ℓ | Shank Diameter d | Figure | |||||
| 1.5 | 0.2 | - | 50 | 4 | 6 | 1 | |||||
| 2 | 0.2 | - | 50 | 6 | 6 | 1 | |||||
| 2.5 | 0.2 | - | 60 | 7 | 6 | 1 | |||||
| 3 | 0.2 | 0.3 | 0.5 | - | 60 | 8 | 6 | 1 | |||
| 4 | 0.2 | 0.3 | 0.5 | 1 | - | 70 | 10 | 6 | 1 | ||
| 5 | 0.2 | 0.5 | 1 | - | 90 | 13 | 6 | 1 | |||
| 6 | 0.2 | 0.3 | 0.5 | 1 | - | 90 | 15 | 6 | 2 | ||
| 0.5 | 1 | 110 | 110 | 15 | 6 | 2 | |||||
| 8 | 0.3 | 0.5 | 1 | - | 70 | 20 | 8 | 2 | |||
| 0.2 | 0.3 | 0.5 | 1 | 100 | 100 | 20 | 8 | 2 | |||
| 10 | 0.5 | 1 | - | 75 | 25 | 10 | 2 | ||||
| 0.2 | 0.3 | 0.5 | 1 | 2 | 100 | 100 | 25 | 10 | 2 | ||
| 12 | 0.5 | 1 | - | 80 | 30 | 12 | 2 | ||||
| 0.5 | 1 | 2 | 3 | 110 | 110 | 30 | 12 | 2 | |||
| 1 | 130 | 130 | 30 | 12 | 2 | ||||||
| 0.5 | 150 | 150 | 30 | 12 | 2 | ||||||
Example of Use
● High efficiency machining can be realized by suppressing chattering through the use of "unequal lead."
● Smooth chip discharge is achieved using an optimum groove geometry.
[ ! ]The electrical conductivity is minimal.
Basic information
| Work Material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Stainless Steel / Cast Iron / Aluminum Alloy / Titanium Alloy / Copper Alloy | Number of Flutes(sheet) | 4 | Model | Radius |
|---|---|---|---|---|---|
| Processing Applications | Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) / Inclined Cutting |
This page is VAC Series Carbide 4-Flute Uneven Lead Radius End Mill, part number VAC-CR-VHEM4R10-R0.2-100.
You can find the detail information about specifications and dimensions on part number VAC-CR-VHEM4R10-R0.2-100.
Configure
Basic Attributes
-
Type
- VAC-CR-VHEM4R
-
Outer Diameter (D)(φ)
-
R Size(mm)
-
Flute Length (ℓ)(mm)
-
Overall Length (L)(mm)
-
Shank Diameter (d)(mm)
Filter by standard shipping days
-
- All
- 5 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Variation of this product
| Part Number |
|---|
| VAC-CR-VHEM4R1.5-R0.2 |
| VAC-CR-VHEM4R10-R0.3-100 |
| VAC-CR-VHEM4R10-R0.5 |
| VAC-CR-VHEM4R10-R0.5-100 |
| VAC-CR-VHEM4R10-R1 |
| VAC-CR-VHEM4R10-R1-100 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | Outer Diameter (D) (φ) | R Size (mm) | Flute Length (ℓ) (mm) | Overall Length (L) (mm) | Shank Diameter (d) (mm) | Figure |
|---|---|---|---|---|---|---|---|---|---|---|
55.34 € | 1 | Available | 5 Days | 1.5 | 0.2 | 4 | 50 | 6 | 1 | |
94.74 € | 1 | Available | 5 Days | 10 | 0.3 | 25 | 100 | 10 | 2 | |
85.77 € | 1 | Available | 5 Days | 10 | 0.5 | 25 | 75 | 10 | 2 | |
94.74 € | 1 | Available | 5 Days | 10 | 0.5 | 25 | 100 | 10 | 2 | |
85.77 € | 1 | Available | 5 Days | 10 | 1 | 25 | 75 | 10 | 2 | |
94.74 € | 1 | Available | 5 Days | 10 | 1 | 25 | 100 | 10 | 2 |
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.