VAC Series Carbide 4-Flute Uneven Lead Radius End Mill (VAC-CR-VHEM4R6-R0.5)
- Volume Discount
Product Details:
Manufacturer part number: VAC-CR-VHEM4R6-R0.5
Brand: MISUMI
Price: 45.13 €
Delivery time: 5 Days
Technical Data:
Outer Diameter (D): 6 φ
R Size: 0.5 mm
Flute Length (ℓ): 15 mm
Overall Length (L): 90 mm
Shank Diameter (d): 6 mm
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
VAC-CR-VHEM4R6-R0.5
Part Number
|
|---|
| VAC-CR-VHEM4R6-R0.5 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Outer Diameter (D) (φ) | R Size (mm) | Flute Length (ℓ) (mm) | Overall Length (L) (mm) | Shank Diameter (d) (mm) | Figure | |
|---|---|---|---|---|---|---|---|---|---|---|
45.13 € | 1 | Available | 5 Days | 6 | 0.5 | 15 | 90 | 6 | 2 |
Loading...
Specifications
Model Number
VAC-CR-VHEM4R
| Flute Diameter D | Radius R | Overall Length L | Overall Length L | Blade Length ℓ | Shank Diameter d | Figure | |||||
| 1.5 | 0.2 | - | 50 | 4 | 6 | 1 | |||||
| 2 | 0.2 | - | 50 | 6 | 6 | 1 | |||||
| 2.5 | 0.2 | - | 60 | 7 | 6 | 1 | |||||
| 3 | 0.2 | 0.3 | 0.5 | - | 60 | 8 | 6 | 1 | |||
| 4 | 0.2 | 0.3 | 0.5 | 1 | - | 70 | 10 | 6 | 1 | ||
| 5 | 0.2 | 0.5 | 1 | - | 90 | 13 | 6 | 1 | |||
| 6 | 0.2 | 0.3 | 0.5 | 1 | - | 90 | 15 | 6 | 2 | ||
| 0.5 | 1 | 110 | 110 | 15 | 6 | 2 | |||||
| 8 | 0.3 | 0.5 | 1 | - | 70 | 20 | 8 | 2 | |||
| 0.2 | 0.3 | 0.5 | 1 | 100 | 100 | 20 | 8 | 2 | |||
| 10 | 0.5 | 1 | - | 75 | 25 | 10 | 2 | ||||
| 0.2 | 0.3 | 0.5 | 1 | 2 | 100 | 100 | 25 | 10 | 2 | ||
| 12 | 0.5 | 1 | - | 80 | 30 | 12 | 2 | ||||
| 0.5 | 1 | 2 | 3 | 110 | 110 | 30 | 12 | 2 | |||
| 1 | 130 | 130 | 30 | 12 | 2 | ||||||
| 0.5 | 150 | 150 | 30 | 12 | 2 | ||||||
Example of Use
● High efficiency machining can be realized by suppressing chattering through the use of "unequal lead."
● Smooth chip discharge is achieved using an optimum groove geometry.
[ ! ]The electrical conductivity is minimal.
Basic information
| Work Material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Stainless Steel / Cast Iron / Aluminum Alloy / Titanium Alloy / Copper Alloy | Number of Flutes(sheet) | 4 | Model | Radius |
|---|---|---|---|---|---|
| Processing Applications | Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) / Inclined Cutting |
This page is VAC Series Carbide 4-Flute Uneven Lead Radius End Mill, part number VAC-CR-VHEM4R6-R0.5.
You can find the detail information about specifications and dimensions on part number VAC-CR-VHEM4R6-R0.5.
Configure
Basic Attributes
-
Type
- VAC-CR-VHEM4R
-
Outer Diameter (D)(φ)
-
R Size(mm)
-
Flute Length (ℓ)(mm)
-
Overall Length (L)(mm)
-
Shank Diameter (d)(mm)
Filter by standard shipping days
-
- All
- 5 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Variation of this product
| Part Number |
|---|
| VAC-CR-VHEM4R10-R0.5 |
| VAC-CR-VHEM4R10-R0.5-100 |
| VAC-CR-VHEM4R10-R1 |
| VAC-CR-VHEM4R6-R0.5-110 |
| VAC-CR-VHEM4R6-R1 |
| VAC-CR-VHEM4R6-R1-110 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | Outer Diameter (D) (φ) | R Size (mm) | Flute Length (ℓ) (mm) | Overall Length (L) (mm) | Shank Diameter (d) (mm) | Figure |
|---|---|---|---|---|---|---|---|---|---|---|
69.29 € | 1 | Available | 5 Days | 10 | 0.5 | 25 | 75 | 10 | 2 | |
76.53 € | 1 | Available | 5 Days | 10 | 0.5 | 25 | 100 | 10 | 2 | |
69.29 € | 1 | Available | 5 Days | 10 | 1 | 25 | 75 | 10 | 2 | |
57.14 € | 1 | Available | 5 Days | 6 | 0.5 | 15 | 110 | 6 | 2 | |
45.13 € | 1 | Available | 5 Days | 6 | 1 | 15 | 90 | 6 | 2 | |
57.14 € | 1 | Available | 5 Days | 6 | 1 | 15 | 110 | 6 | 2 |
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.