Spring Pin (General Purposes)【1-1,000 Pieces Per Package】 (Part Numbers)
- Volume Discount
· Cylindrically coiled thin plate with a slit. When inserted (by press fit) into a hole with a diameter slightly smaller than that of its outer diameter, the pin applies internal pressure to the hole (force due to its expansion), preventing it from dropping out from the hole.
· This hollow pin contributes to weight reduction when compared with solid pins.
· Used for positioning, turn prevention, and retention, etc.
· Used for simple fastening and positioning, etc.
· Its grip prevents it from dropping out from its mating hole.
· When it is necessary to increase the shear load, use a double-pin structure. (The load is made by adding the shear load on the outer and inner pins.)
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
SPP-1.5-20
- Product data
- CAD data not available
Part Number
|
|---|
| SPP-1.5-20 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | RoHS | Material | Nominal Dia. | Length l | Outer Diameter D (Maximum) (mm) | Outer Diameter D (Minimum) (mm) | Surface Treatment | Sales Unit | Hardness (HRC) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
0.02 € | 1 | 6 Days | 10 | Steel | 1.5 | 20 | 1.7 | 1.6 | Phosphate coated | Low Quantity (can be purchased from one) | 45~50 |
Loading...
Basic information
| Shape | Spring Pin | Shaft Dia. Tolerance | Positive Tolerance | Shaft End Shape | Standard |
|---|---|---|---|---|---|
| Properties | General |
This page is Spring Pin (General Purposes), part number SPP-1.5-20.
You can find the detail information about specifications and dimensions on part number SPP-1.5-20.
Configure
Basic Attributes
-
Type
- SPP
- SPP-S
-
Material
-
Nominal Dia.
-
Length l
-
Outer Diameter D (Maximum)(mm)
-
Outer Diameter D (Minimum)(mm)
-
Surface Treatment
- No
- Phosphate coated
-
Sales Unit
-
Hardness(HRC)
- 40~50
- 45~50
Filter by standard shipping days
-
- All
- Same day
- 6 Days or Less
- 7 Days or Less
- 8 Days or Less
- 11 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Variation of this product
| Part Number |
|---|
| SPP-1-12-SUS |
| SPP-1-14 |
| SPP-1-15-SUS |
| SPP-1.5-24 |
| SPP-1.5-4 |
| SPP-1.5-4-SUS |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | RoHS | Material | Nominal Dia. | Length l | Outer Diameter D (Maximum) (mm) | Outer Diameter D (Minimum) (mm) | Surface Treatment | Sales Unit | Hardness (HRC) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
0.04 € | 1 | Available | 6 Days | 10 | Stainless Steel | 1 | 12 | 1.2 | 1.1 | No | Low Quantity (can be purchased from one) | 45~50 | |
0.03 € | 1 | Available |
Same day
Stock | 10 | Steel | 1 | 14 | 1.2 | 1.1 | Phosphate coated | Low Quantity (can be purchased from one) | 45~50 | |
0.12 € | 1 | Available | 6 Days | 10 | Stainless Steel | 1 | 15 | 1.2 | 1.1 | No | Low Quantity (can be purchased from one) | 45~50 | |
0.03 € | 1 | Available |
Same day
Stock | 10 | Steel | 1.5 | 24 | 1.7 | 1.6 | Phosphate coated | Low Quantity (can be purchased from one) | 45~50 | |
0.04 € | 1 | Available | 6 Days | 10 | Steel | 1.5 | 4 | 1.7 | 1.6 | Phosphate coated | Low Quantity (can be purchased from one) | 45~50 | |
0.03 € | 1 | Available | 6 Days | 10 | Stainless Steel | 1.5 | 4 | 1.7 | 1.6 | No | Low Quantity (can be purchased from one) | 45~50 |
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.