Elbow Union Type, Ring Joint (Part Numbers)
Connection is performed via crimping of the copper tubing exterior to the inner surface of the ring, so neither threading nor brazing welding are required. Connection can be performed simply by tightening the cap nut.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
RL-6-R
- Product data
- CAD data not available
Basic information
| Type | Fitting | Material | EN CW617N Equiv. | Applicable Pipe Type | Copper Pipe (Annealed Copper Pipe) |
|---|---|---|---|---|---|
| Applicable Fluid | Water / Air / Vapor / Gas / Oil | Connection Type | Pipe-to-Pipe, Equal Diameter, Socket Type | Connection Shape | Elbow |
| Fitting type | Ring Fitting | Applicable Tube Size Type | Copper Pipe mm size | Material of Applicable Pipe | Copper |
| Nominal 1(mm) | 6 | Applicable Pipe O.D. 1(mm) | 6 | Max. Operating Pressure(MPa) | 4.9 |
| Surface Treatment | Nickel Plating | Operating Temperature Range (Use at 14.9MPa)(°C) | -45::125 | Divisions of Max. Operating Pressure(MPa) | More than 2.0MPa |
This page is Elbow Union Type, Ring Joint, part number RL-6-R.
You can find the detail information about specifications and dimensions on part number RL-6-R.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.