M4 Mounting Seal Type Basic Switch
It can be fitted by 1 screw. A seal type also suitable in bad environment
- Stock
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
D2FW-G273M
Basic information
| Detector Shape | Lever Shape (push) | DC rated operating voltage(V) | 30 | Lever Shape | Leaf |
|---|---|---|---|---|---|
| Operating Temperature Range(°C) | -40::85 | Protective Structure | IP67 | Required force to push side, O.F.(N) | Up to 3 |
| Contact type | Single Pole Normally Open | Types of contact point | Crossbar | Contact Material | Silver alloy |
| Mechanical Life(x10K times) | 30 | Operation Frequency of Machine(times/min. or Less) | 120 | Rated Current(A) | 1 |
| Main Body External Shape Width W(mm) | 8 | Main Body External Shape Height H(mm) | 13.5 | Main Body External Shape Length H(mm) | 23.5 |
| Current type | - | Actuator rotational direction | - | Torque necessary for operation(mN/m) | 2450 |
| Movement until operation, PT(°) | - | Actuator type | - | Terminal Specification | - |
| Lever mounting position | - | Format standard | - | Lead Wire Drawer Direction | - |
| Length of lead wire(m) | - | Movement After the Operation OT(mm) | 1.0 | Operating Position OP(mm) | 11.5±2 |
| Cable Length(m) | - | Contact spacing(mm) | 0.25 | Contact Configuration | 1a |
| Mounting format | Screw mounting | Details Type | For general load | Required force for push side, O.F. (detailed numerical values)(N) | 2.45 |
This page is M4 Mounting Seal Type Basic Switch, part number D2FW-G273M.
You can find the detail information about specifications and dimensions on part number D2FW-G273M.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.