Screw-In PL Fitting, 45° Elbow (Part Numbers)
[Features]
• JFE pipe fittings are produced at cutting-edge facilities with thorough quality control.
• Moreover, ring stamp PL fittings are coat-baked with powder epoxy resin on the inner and outer surfaces, excluding screws, using a special coating method, providing enhanced adhesiveness, corrosion resistance, etc.
• Can be used with a high level of reliability.
• JFE pipe fittings are produced at cutting-edge facilities with thorough quality control.
• Moreover, ring stamp PL fittings are coat-baked with powder epoxy resin on the inner and outer surfaces, excluding screws, using a special coating method, providing enhanced adhesiveness, corrosion resistance, etc.
• Can be used with a high level of reliability.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
PL-45L-3/4
- Product data
- CAD data not available
Basic information
| Type | Fitting | Connection Type | Screw⇔Screw Same Diameter・Different Type | Connecting Shape | 45° Elbow |
|---|---|---|---|---|---|
| Material | Cast Iron | Thread Nominal M1 | 3/4B(20A) | Connection Thread Type M1 | Rc |
| Max. Operating Pressure(MPa) | 2.5 | Applicable Fluid | Water / Air | Surface Treatment | Epoxy Resin |
| Divisions of Max. Operating Pressure | More than 2.0MPa | Interior Resin Lining | Available |
This page is Screw-In PL Fitting, 45° Elbow, part number PL-45L-3/4.
You can find the detail information about specifications and dimensions on part number PL-45L-3/4.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.