Screw-In PL Fitting, Reducing Socket with Collar
[Features]
• JFE pipe fittings are produced at cutting-edge facilities with thorough quality control.
• Moreover, ring stamp PL fittings are coat-baked with powder epoxy resin on the inner and outer surfaces, excluding screws, using a special coating method, providing enhanced adhesiveness, corrosion resistance, etc.
• Can be used with a high level of reliability.
• JFE pipe fittings are produced at cutting-edge facilities with thorough quality control.
• Moreover, ring stamp PL fittings are coat-baked with powder epoxy resin on the inner and outer surfaces, excluding screws, using a special coating method, providing enhanced adhesiveness, corrosion resistance, etc.
• Can be used with a high level of reliability.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
PL-BRS-11/4X1
- Product data
- CAD data not available
Basic information
| Type | Fitting | Connection Type | Screw⇔Screw Different Diameter | Connecting Shape | Socket |
|---|---|---|---|---|---|
| Material | Cast Iron | Thread Nominal M1 | 1B(25A) | Thread Nominal M2 | 1 1/4B(32A) |
| Connection Thread Type M1 | Rc | Connection Thread Type M2 | Rc | Max. Operating Pressure(MPa) | 2.5 |
| Applicable Fluid | Water / Air | Surface Treatment | Epoxy Resin | Divisions of Max. Operating Pressure | More than 2.0MPa |
| Interior Resin Lining | Available |
This page is Screw-In PL Fitting, Reducing Socket with Collar, part number PL-BRS-11/4X1.
You can find the detail information about specifications and dimensions on part number PL-BRS-11/4X1.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.