Screw-In Malleable Cast Iron Pipe Fitting, Elbow
[Features]
• JFE pipe fittings are produced at cutting-edge facilities with thorough quality control.
• Moreover, ring stamp PL fittings are coat-baked with powder epoxy resin on the inner and outer surfaces, excluding screws, using a special coating method, providing enhanced adhesiveness, corrosion resistance, etc.
• Can be used with a high level of reliability.
• JFE pipe fittings are produced at cutting-edge facilities with thorough quality control.
• Moreover, ring stamp PL fittings are coat-baked with powder epoxy resin on the inner and outer surfaces, excluding screws, using a special coating method, providing enhanced adhesiveness, corrosion resistance, etc.
• Can be used with a high level of reliability.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
L-B-1/8
- Product data
- CAD data not available
Basic information
| Type | Fitting | Connection Type | Screw⇔Screw Same Diameter・Different Type | Connecting Shape | 90° Elbow |
|---|---|---|---|---|---|
| Material | Cast Iron | Thread Nominal M1 | 1/8B(6A) | Connection Thread Type M1 | Rc |
| Max. Operating Pressure(MPa) | 1 | Applicable Fluid | Water / Air / Vapor / Gas / Oil | Surface Treatment | NA |
| Divisions of Max. Operating Pressure | 1.0Mpa or Less | Interior Resin Lining | NA | Details of Max. Operating Pressure (Vapor/Air/Gas/Oil which is 300°C or Less)(MPa) | 1.0 |
| Details of Max. Operating Pressure (Steady Flow which is 120°C or Less)(MPa) | 2.5 |
This page is Screw-In Malleable Cast Iron Pipe Fitting, Elbow, part number L-B-1/8.
You can find the detail information about specifications and dimensions on part number L-B-1/8.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.