Screw-In Malleable Cast Iron Pipe Fitting, Plug
[Features]
• JFE pipe fittings are produced at cutting-edge facilities with thorough quality control.
• Moreover, ring stamp PL fittings are coat-baked with powder epoxy resin on the inner and outer surfaces, excluding screws, using a special coating method, providing enhanced adhesiveness, corrosion resistance, etc.
• Can be used with a high level of reliability.
• JFE pipe fittings are produced at cutting-edge facilities with thorough quality control.
• Moreover, ring stamp PL fittings are coat-baked with powder epoxy resin on the inner and outer surfaces, excluding screws, using a special coating method, providing enhanced adhesiveness, corrosion resistance, etc.
• Can be used with a high level of reliability.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Product data
- CAD data not available
Basic information
| Type | Fitting | Connection Type | Pitch (Terminal) | Connecting Shape | Plug |
|---|---|---|---|---|---|
| Material | Cast Iron | Connection Thread Type M1 | R | Max. Operating Pressure(MPa) | 1 |
| Applicable Fluid | Water / Air / Vapor / Gas / Oil | Divisions of Max. Operating Pressure | 1.0Mpa or Less | Interior Resin Lining | NA |
| Details of Max. Operating Pressure (Vapor/Air/Gas/Oil which is 300°C or Less)(MPa) | 1.0 | Details of Max. Operating Pressure (Steady Flow which is 120°C or Less)(MPa) | 2.5 |
Configure
Basic Attributes
-
Surface Treatment
- NA
- Zinc Plating
-
Type
- P-B
- P-W
-
Thread Nominal M1
- 1/8B(6A)
- 1/4B(8A)
- 3/8B(10A)
- 1/2B(15A)
- 3/4B(20A)
- 1B(25A)
- 1 1/4B(32A)
- 1 1/2B(40A)
- 2B(50A)
- 2 1/2B(65A)
- 3B(80A)
- 4B(100A)
- 5B(125A)
- 6B(150A)
Filter by standard shipping days
-
- All
- 9 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.