Flow Switch, Diaphragm Type, IFW5 Series (IFW510-04-55-Q)
Product Details:
Manufacturer part number: IFW510-04-55-Q
Brand: SMC
Price: 206.89 €
Delivery time: 26 Days
Technical Data:
Flow Rate Range (Max. Value): 10～Less than 50 L/min
Output Method: Switch
Plumbing Thread Type: [Rc (R)] Rc
Nominal Pipe Thread Size: [1/2] 1/2
No. of Outputs: 1
(i)Remark
- See catalog for specification details.
- Product pictures are representations. CAD data is not supported for some model numbers.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
IFW510-04-55-Q
Specifications of Diaphragm-Type Flow Switch IFW5 Series
External appearance of IFW5 Series
| Fluid | Water / Non corrosive liquid* | |
|---|---|---|
| Operating Pressure | 0.1 to 0.6 MPa | |
| Water resistance | 1.2 MPa | |
| Operating temperature range | -5 to 60°C (no freezing) | |
| Action | Diaphragm Regulator | |
| Insulation Resistance | 100 MΩ or more (500 DC by insulation resistance tester) | |
| Withstand Voltage | 1,500 V AC for 1 minute | |
| Contact | Without terminal box: 1ab | |
| With terminal box: 1a and 1b | ||
| Connection port size | 3/8, 1/2, 3/4 | |
| Liquid-contacting parts material | Body | CAC408 |
| Rod | C3604B | |
| Diaphragm | *)NBR | |
* Please contact the manufacturer support center for further details of use.
*) Select "-X404" for ozone environment.
Model
| Model | Set flow rate range L/min | Maximum flow rate L/min | *) Hysteresis L/min |
|---|---|---|---|
| IFW510 | 1 to 10 | 20 | 1 or less |
| IFW520 | 10 to 20 | 25 | 1.5 or less |
| IFW550 | 20 to 50 | 60 | 3 or less |
*) Hysteresis is the flow rate required to move the micro switch from the operating position (ON signal) to the return position (OFF signal). (Typical value)
Microswitch rating
| Voltage | Non-inductive load (A) | Inductive load (A) | ||||||
|---|---|---|---|---|---|---|---|---|
| Load resistance | Lamp load | Inductive load | Electric motor load | |||||
| N.C. | N.O. | N.C. | N.O. | N.C. | N.O. | N.C. | N.O. | |
| AC125V | 5 | 5 | 1.5 | 0.7 | 4 | 4 | 2.5 | 1.3 |
| AC250V | 5 | 5 | 1 | 0.5 | 4 | 4 | 1.5 | 0.8 |
| DC8V | 7 | 5 | 3 | 3 | 5 | 4 | 3 | 3 |
| DC14V | 5 | 5 | 3 | 3 | 4 | 4 | 3 | 3 |
| DC30V | 5 | 5 | 3 | 3 | 4 | 4 | 3 | 3 |
| DC125V | 0.4 | 0.4 | 0.1 | 0.1 | 0.4 | 0.4 | 0.1 | 0.1 |
| DC250V | 0.3 | 0.3 | 0.05 | 0.05 | 0.3 | 0.3 | 0.05 | 0.05 |
Structure and operating principle diagram
IFW5 Series structure and operating principle diagram
Operating Principle
When water flows, a differential pressure is generated before and after the orifice at the port of body 1. This differential pressure is detected by a pair of upper and lower diaphragms, rod 2 is displaced downward, operating lever 4 is lowered, and the micro switch is turned on.
If the flow rate is increased, the rod will be displaced downwards by 2, and if it is decreased, it will be displaced upwards. In addition, the adjustment gear 5 can be rotated and the gear 3 can be moved vertically to detect signals at any flow rate.
| Number | Part Name | Material |
|---|---|---|
| 1 | Body | CAC408 |
| 2 | Rod | C3604B |
| 3 | Gear | POM |
| Number | Part Name | Material |
|---|---|---|
| 4 | Operating lever | SPCC |
| 5 | Adjusting gear | POM |
Flow Characteristics (Representative Values)
IFW510 flow rate characteristics (Typical value)
IFW520 flow rate characteristics (Typical value)
IFW550 flow rate characteristics (Typical value)
Dimensions
(Units: mm)
Dimensional drawing of IFW5□0-□□-00 to 04 (without terminal box)
Dimensional drawing of IFW5□0-□□-10 to 24 (with terminal box)
Dimensional drawing of IFW5□0-□□-55 to 86 (with 24 V DC lamp and terminal box)
Internal wiring diagram
Internal wiring diagram of IFW5□0-□□-00, 10, 20
| Symbol | Contact | Lead Wire Color |
|---|---|---|
| C | COMMON | Black |
| A | NORMALLY OPEN | White |
| B | NORMALLY CLOSED | Red |
Internal wiring diagram of IFW5□0-□□-01 to 04, 11 to 14, 21 to 24
| Symbol | Contact | Lead Wire Color |
|---|---|---|
| C | COMMON | Black |
| A | NORMALLY OPEN | White |
| B | NORMALLY CLOSED | Red |
Notes
Mounting/wiring
- * 1Please mount the switch so as to align the arrow on the side of the body with the flow of fluid.
- * 2Always fill the flow path with liquid.
- * 3The mounting direction can be horizontal or vertical.
- * 4Before and after the pipe on which the product is mounted, a straight section that is 5 times or more the opening diameter of the pipe should be provided in order to keep away as far as possible from anything that disturbs the flow such as elbows and valves.
- * 5For wiring, refer to the above internal wiring diagram or catalog.
- * 6If there is no terminal box, select 1a or 1b as the contact for wiring. In that case, the unused lead wires requires to be insulated.
- * 7As it is an open type, it cannot be used in a place where water or oil is scattered.
- * 8It cannot be used when water hammer or pulsating pressure is applied to the fluid.
- * 9A filter of approximately 100 mesh on the inlet side of the flow switch should be installed to prevent malfunction and diaphragm damage due to dust and cutting chips in the fluid.
Adjustment
- * 1To set the flow rate, remove the grommet at the top of the cover and turn the flow rate adjustment gear with a straight-slot screwdriver. Turning it clockwise increases the set flow rate, and turning it counterclockwise decreases it.
- * 2The flow rate set point is the ON flow rate set point, so for the 1a contact, the ON signal is output when the flow rate exceeds the set flow rate.
- * 3In case of 1b contact, the ON signal is output when the flow rate decreases by hysteresis from the set flow rate.
- * 4To prevent chattering due to fluctuations in the operating flow rate, make the difference between the set flow rate and the operating flow rate as large as possible.
- * 5Use below the maximum operating pressure and flow rate.
- * 6The scale on the window name plate is a standard. For precise settings, please mount a flow meter to the outlet side of the flow rate switch. When setting a low flow rate when using at a pressure of 0.2 MPa or more, the indicator needle and scale plate may interfere. In this case, remove the indicator needle and scale plate and set. After setting, attach the indicator needle and scale plate at any positions.
Additional Precautions
- *See the SMC catalog for information other than that detailed above.
- *Product pictures are representative images.
Part Number
|
|---|
| IFW510-04-55-Q |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Flow Rate Range (Max. Value) (L/min) | Output Method | Plumbing Thread Type | Nominal Pipe Thread Size | No. of Outputs | Applicable Fluid | Rated Pressure Range | Rating Flow Range (L/min) | Contact configuration | Terminal box | Lamp | CE compliant | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
206.89 € | 1 | 26 Days | 10～Less than 50 | Switch | [Rc (R)] Rc | [1/2] 1/2 | 1 | Water / Non corrosive liquid* | 0.1 to 0.6 MPa | 1 to 10 | 1b | With terminal box (For 24 V DC/+COM) | With LED light (24 V DC, red) | CE-compliant product |
Loading...
Basic information
| Type | Flow Switch | Fluid Type | Water | Sensor/Monitor Configuration | Integrated Type |
|---|---|---|---|---|---|
| Pipe Port Type | Female Thread | Fluid Characteristics | Noncorrosive |
This page is Flow Switch, Diaphragm Type, IFW5 Series, part number IFW510-04-55-Q.
You can find the detail information about specifications and dimensions on part number IFW510-04-55-Q.
Configure
Basic Attributes
-
Type
- IFW510
- IFW520
- IFW550
-
Flow Rate Range (Max. Value)(L/min)
- 10～Less than 50
- 50～Less than 100
-
Output Method
- Switch
-
Plumbing Thread Type
- Rc (R)
- G
- NPT
- Rc (R)
-
Nominal Pipe Thread Size
- 3/8
- 1/2
- 3/4
- 3/8
-
No. of Outputs
- 1
-
Applicable Fluid
- Water / Non corrosive liquid*
-
Rated Pressure Range
- 0.1 to 0.6 MPa
-
Rating Flow Range(L/min)
- 1 to 10
- 10 to 20
- 20 to 50
-
Contact configuration
- 1a
- 1ab
- 1b
-
Terminal box
- With terminal box (24 V DC / -COM)
- With terminal box (For 24 V DC/-COM)
- With terminal box (For 24 V DC/+COM)
- With terminal box
- Without terminal box
-
Lamp
- With LED light (24 V DC, green)
- With LED light (24 V DC, red)
- With neon light (110 V AC, red)
- With neon lamp (220 V AC red)
- With neon lamp (220 V AC, green)
- Without light
-
CE compliant
- CE-compliant product
- CE Marked
- Non-Compatible
- None
-
Filter by CAD data type
- 2D
- 3D
Filter by standard shipping days
-
- All
- 4 Days or Less
- 22 Days or Less
- 26 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Variation of this product
| Part Number |
|---|
| IFW510-03-11-Q |
| IFW510-03-20-Q |
| IFW510-03-55-Q |
| IFW510-04-56-Q |
| IFW510-04-65-Q |
| IFW510-04-66-Q |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | Flow Rate Range (Max. Value) (L/min) | Output Method | Plumbing Thread Type | Nominal Pipe Thread Size | No. of Outputs | Applicable Fluid | Rated Pressure Range | Rating Flow Range (L/min) | Contact configuration | Terminal box | Lamp | CE compliant |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
206.89 € | 1 | 26 Days | 10～Less than 50 | Switch | [Rc (R)] Rc | [3/8] 3/8 | 1 | Water / Non corrosive liquid* | 0.1 to 0.6 MPa | 1 to 10 | 1a | With terminal box | With neon light (110 V AC, red) | CE-compliant product | ||
188.47 € | 1 | 26 Days | 10～Less than 50 | Switch | [Rc (R)] Rc | [3/8] 3/8 | 1 | Water / Non corrosive liquid* | 0.1 to 0.6 MPa | 1 to 10 | 1b | With terminal box | Without light | CE-compliant product | ||
206.89 € | 1 | 26 Days | 10～Less than 50 | Switch | [Rc (R)] Rc | [3/8] 3/8 | 1 | Water / Non corrosive liquid* | 0.1 to 0.6 MPa | 1 to 10 | 1b | With terminal box (For 24 V DC/+COM) | With LED light (24 V DC, red) | CE-compliant product | ||
206.89 € | 1 | 26 Days | 10～Less than 50 | Switch | [Rc (R)] Rc | [1/2] 1/2 | 1 | Water / Non corrosive liquid* | 0.1 to 0.6 MPa | 1 to 10 | 1b | With terminal box (For 24 V DC/+COM) | With LED light (24 V DC, green) | CE-compliant product | ||
206.89 € | 1 | 26 Days | 10～Less than 50 | Switch | [Rc (R)] Rc | [1/2] 1/2 | 1 | Water / Non corrosive liquid* | 0.1 to 0.6 MPa | 1 to 10 | 1a | With terminal box (For 24 V DC/+COM) | With LED light (24 V DC, red) | CE-compliant product | ||
206.89 € | 1 | 26 Days | 10～Less than 50 | Switch | [Rc (R)] Rc | [1/2] 1/2 | 1 | Water / Non corrosive liquid* | 0.1 to 0.6 MPa | 1 to 10 | 1a | With terminal box (For 24 V DC/+COM) | With LED light (24 V DC, green) | CE-compliant product |
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.