Biaxial Fixed Stage For Alignment
[Features]
· Clampless stage that stays in place after position adjustment.
· Special mechanism to prevent backlash.
· Use hex wrench to adjust position. * Hex wrench not included.
· Supports specially shaped wrenches instead of hex wrench (optional).
· Ideal for workpieces that must remain stationary after camera or sensor position adjustment instead of requiring constant adjustment.
· The stage has a transmission hole at the center.
· Can be installed horizontally, vertically and upside-down.
· Clampless stage that stays in place after position adjustment.
· Special mechanism to prevent backlash.
· Use hex wrench to adjust position. * Hex wrench not included.
· Supports specially shaped wrenches instead of hex wrench (optional).
· Ideal for workpieces that must remain stationary after camera or sensor position adjustment instead of requiring constant adjustment.
· The stage has a transmission hole at the center.
· Can be installed horizontally, vertically and upside-down.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
TD-A4051FX
- Product data
- CAD data not available
Basic information
| Type | Goniometer XY Axis | Stage surface (length) (range of selection)(mm) | 26 to 40 | Stage surface (width) (range of selection)(mm) | 26 to 40 |
|---|---|---|---|---|---|
| Load Capacity (Range Selectable)(N) | 5–30 | Feeding Method | Feed Screw | Table Material | Aluminum Alloy |
| Table Surface Treatment | Black Anodized Aluminum Satin | Guiding Mechanism | Shaft Slide | Stage surface (length)(mm) | 40 |
| Stage surface (width)(mm) | 40 | Allowable Load(N) | 24.5 | Through Hole (Table Center Hole) | Available |
| Stroke (θ Angle)(deg) | ±1.5 | Stroke (α Angle)(deg) | ±1.5 | Clamp Method | NA |
| Moving Direction | Tilt in 2 directions |
This page is Biaxial Fixed Stage For Alignment, part number TD-A4051FX.
You can find the detail information about specifications and dimensions on part number TD-A4051FX.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.