Knurled screws with recessed stud for loss prevention
- Promotional pricing ends 30/11/2024
- Volume Discount
When using, instead of a typical tapped and bore hole, it is necessary to provide tapped bores with a thread d1 on each of the two elements to be assembled. Additionally, a clearance bore of d5 on one or both sides must be cut.
Depending on the design and required clamping length a1 ... a3 of the component being attached, there are a number of assembly options as shown above.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Length l (mm) | Thread d1 | |
|---|---|---|---|---|---|---|
2.12 € | 1 | Available |
Same day
Stock | 15 | M 4 | |
2.12 € 1.48 € | 1 | Available |
Same day
Stock | 17 | M 4 | |
2.18 € | 1 | Available | 7 Days | 19 | M 4 | |
2.22 € | 1 | Available | 7 Days | 21 | M 4 | |
2.82 € | 1 | Available | 7 Days | 18 | M 5 | |
2.82 € | 1 | Available | 7 Days | 20 | M 5 | |
2.66 € 1.86 € | 1 | Available |
Same day
Stock | 22 | M 5 | |
2.72 € | 1 | Available |
Same day
Stock | 26 | M 5 | |
4.20 € 2.94 € | 1 | Available |
Same day
Stock | 24 | M 6 | |
4.22 € | 1 | Available | 7 Days | 26 | M 6 | |
4.38 € 3.07 € | 1 | Available |
Same day
Stock | 30 | M 6 | |
4.50 € | 1 | Available | 7 Days | 34 | M 6 | |
5.38 € 3.77 € | 1 | Available |
Same day
Stock | 30 | M 8 | |
5.58 € 3.91 € | 1 | Available |
Same day
Stock | 34 | M 8 | |
5.66 € 3.96 € | 1 | Available |
Same day
Stock | 38 | M 8 | |
5.80 € | 1 | Available | 7 Days | 42 | M 8 |
Loading...
Basic information
| Material | Steel |
|---|
Configure
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.