Pressure Switch With Status LED
[Features]
· For general fluids
· Equivalent to IP44
· With light
(i)Remark
- Product images may be representative images. Refer to the manufacturer's catalog for details
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
Specifications of Pressure Switch With Indicator Light
External appearance of pressure switch with indicator light
Contact configuration of pressure switch with indicator light
- 1.3: Power supply for lamp
- 4: COMMON
- 5: NORMALLY CLOSED
- 6: NORMALLY OPEN
- With increased pressure, b contact (4.5) OFF
- With increased pressure, a contact (4.6) ON
- With increased pressure, lamp goes off
| Pressure Adjustment Range | 0.1 to 1.0 MPa |
|---|---|
| Hysteresis adjustment range | 0.03 to 0.4 MPa |
| Proof Pressure | 1.5 MPa |
| Repeat accuracy | ±0.02 MPa |
| Contact | 1ab (Lamp 1b) |
| Port Size | 3/8 |
| Ambient and fluid temperature | -5～+80℃ (No freezing) |
| Protective Enclosure | Open type (equivalent to IP40) |
| Electrical entry | Grommet |
| Weight | 1.3 kg |
Fluid
| Fluid | Liquid-contacting parts material | |
|---|---|---|
| Bellows | Fluid intake part | |
| Water, air, liquid,inert gas without corrosion | Phosphor bronze | Brass |
| Fluid that does not corrode SUS316 | SUS316 | SUS316 |
* Operating fluid is limited by the wetted part material. Model with compatible material should be selected.
Snap switch electrical rating
| Rated Voltage (V) | Non-inductive load (A) | Inductive load (A) | ||
|---|---|---|---|---|
| Load resistance | Lamp load | Inductive load | Electric motor load | |
| AC110 | 12 | 2 | 12 | 3 |
| AC220 | 10 | 1 | 10 | 1.5 |
| AC440 | 6 | 1 | 3 | 1 |
| DC24 | 3 | 2.5 | 3 | 2.5 |
| DC48 | 1.5 | 1.2 | 1.5 | 1.25 |
| DC110 | 0.5 | 0.25 | 0.5 | 0.2 |
| DC220 | 0.25 | 0.1 | 0.25 | 0.1 |
- Insulation Resistance: 100 MΩ or more (500 V DC by insulation resistance tester)
- Withstand Voltage: 2,000 V AC for 1 minute
Dimensions
(Units: mm)
Dimensional drawing of pressure switch with operation indicator light
| Part number | A | B | C |
|---|---|---|---|
| IS2761-103 L□ | 173 | 55 | 19 |
| IS2761-1103 L□ | 178 | 60 | 23 |
Notes
- * Please check the catalog for safety precautions, pressure switch / common precautions, and individual product precautions.
Part Number
|
|---|
| IS2761-103L2 |
| IS2761-103L9 |
| IS2761-1103L1 |
| IS2761-1103L9 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Liquid contact parts material | Operation indicator lamp power supply | |
|---|---|---|---|---|---|---|
159.60 € | 1 | 26 Days | [Copper Alloy] Brass•Phosphor Bronze | AC220V | ||
159.31 € | 1 | 26 Days | [Copper Alloy] Brass•Phosphor Bronze | 24 V DC | ||
226.27 € | 1 | 26 Days | [Stainless Steel] EN 1.4401 Equiv. | AC110V | ||
226.11 € | 1 | 26 Days | [Stainless Steel] EN 1.4401 Equiv. | 24 V DC |
Loading...
Basic information
| Type | Pressure Switch | Fluid Type | Air / Water / Coolant / Lubricant / Nitrogen Gas / Carbonic Acid Gas / City Gas / Methane Gas / Propane gas | Sensor/Monitor Configuration | Integrated Type |
|---|---|---|---|---|---|
| Output Method | Switch | Pipe Port Type | Male thread | Plumbing Thread Type | R |
| Nominal Pipe Thread Size | 3/8 | Fluid Characteristics | Noncorrosive / Inert | Pressure Resistance(MPa) | 1.5 |
| Operating Temperature Range(℃) | -5::80 | No. of Inputs | 1 | No. of Outputs | 1 |
| Pipe Connection Direction | Down | Acquired Standards | CE | Protective Structure | IP40 |
| Hysteresis(MPa) | 0.03 to 0.4 MPa | Scale plate pressure unit | MPa |
Configure
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.