Air Cylinder, Non-Rotating Rod Type: Double Acting, Single Rod CA2K Series (CA2KG40-160)
Product Details:
Manufacturer part number: CA2KG40-160
Brand: SMC
Price: 193.47 €
Delivery time: 46 Days
Technical Data:
Cylinder (Tube) Inner Diameter: 40 Ø
Stroke: 160 mm
Cushion: Air cushion
Specifications: Without magnet
Port thread type: Rc
(i)Remark
- See catalog for specification details.
- CAD data is not supported for some model numbers.
- Product pictures are representations.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
CA2KG40-160
Model Number Notation
Model Number Notation
Air Cylinder, Non-Rotating Rod Type: Double Acting, Single Rod, CA2K Series Specifications
Appearance of CA2K series
JIS symbol of CA2K series (air cushion)
| Tube Inner Diameter (mm) | 40 | 50 | 63 |
|---|---|---|---|
| Fluid | Air | ||
| Proof Pressure | 1.5 MPa | ||
| Maximum operating pressure | 1.0 MPa | ||
| Minimum operating pressure | 0.05 MPa | ||
| Ambient and fluid temperature | Without auto switch -10 to 70°C with auto switch -10 to 60°C * | ||
| Piston Speed | 50 to 500 mm/s | ||
| Cushioning | Air cushion | ||
| Stroke Length Tolerance | Up to 250st: (0- + 1.0), 251-600st: (0 to +1.4) | ||
| Rod Non-rotating Accuracy | ±0.8° | ||
| Allowable rotational torque | 0.44N·m or Less | ||
| Lubrication | Not required (non-lubricated) | ||
| Mounting type | Basic type, axial foot type, rod-end flange type, head-end flange type, single clevis type, double clevis type, center trunnion type | ||
- *No freezing.
Weight Table
(Unit: kg)
| Tube Inner Diameter (mm) | 40 | 50 | 63 | |
|---|---|---|---|---|
| Basic weight | Basic Type | 0.88 | 1.32 | 1.91 |
| Axial foot type | 1.07 | 1.54 | 2.25 | |
| Flange | 1.25 | 1.77 | 2.70 | |
| Single clevis | 1.11 | 1.66 | 2.54 | |
| Double clevis type | 1.15 | 1.75 | 2.70 | |
| Trunnion type | 1.24 | 1.80 | 2.71 | |
| Additional weight per 50 mm of stroke | 0.20 | 0.25 | 0.30 | |
| Accessories | Single knuckle joint | 0.23 | 0.26 | 0.26 |
| Double knuckle joint (with pin) | 0.37 | 0.43 | 0.43 | |
Calculation
(Example) CA2KL40-100
- Basic weight: 1.07 (Axial foot type ⌀40 (tube inner diameter 40 mm))
- Additional weight: 0.20 / 50 stroke
- Cylinder stroke: 100 stroke
1.07 + 0.20 x 100/50 = 1.47 kg
Rod Boot Material
- Rod boot material (J): nylon tarpaulin, maximum ambient temperature 70°C
- Rod boot material (K): heat-resistant tarpaulin, maximum ambient temperature 110°C*
- *Maximum ambient temperature for the rod boot unit.
Structural Drawing
CA2K Series structural drawing
| Number | Name | Material | Notes |
|---|---|---|---|
| 1 | Rod cover | Aluminum alloy | Metallic coating |
| 2 | Head cover | Aluminum diecast | Metallic coating |
| 3 | Cylinder Tube | Aluminum alloy | Hard anodized aluminum |
| 4 | Piston rod | Carbon steel | Hard chrome plating |
| 5 | Piston | Aluminum alloy | Chromate |
| 6 | Cushion Ring A | Rolled steel | Zinc chromate |
| 7 | Cushion Ring B | Rolled steel | Zinc chromate |
| 8 | Non-Rotating Guide | Oil-impregnated sintered alloy | — |
| 9 | Cushion valve | Steel wire | Zinc trivalent chromate |
| 10 | Tie-rod | Carbon steel | Zinc trivalent chromate |
| 11 | Spring Washer | Steel wire | Zinc trivalent chromate |
| 12 | Piston Nut | Rolled steel | Zinc trivalent chromate |
| 13 | Retaining Ring | Spring steel | Phosphate Coated |
| 14 | Spring Washer | Steel wire | Zinc trivalent chromate |
| 15 | Tie-rod nut | Rolled steel | Zinc trivalent chromate |
| 16 | Wear Ring | Resin | — |
| 17 | Cushion seal holder | Aluminum alloy | — |
| 18 | Cushion Seal | Urethane | — |
| 19 | Rod packing | NBR | — |
| 20 | Piston packing | NBR | — |
| 21 | Cushion valve seal | NBR | — |
| 22 | Cylinder Tube Gasket | NBR | — |
| 23 | Piston gasket | NBR | O-ring |
| 24 | Rod end nut | Rolled steel | Zinc trivalent chromate |
- *Do not disassemble the trunnion type. Please refer to the catalog for details.
Dimensions
(Units: mm)
Basic type CA2KB dimensional drawing
(Units: mm)
| Tube inner diameter (mm) | Stroke range (mm) | A | AL | B | B1 | C | D | E | F | G | H1 | J | KA | M | MM | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Without rod boot | With bellows | |||||||||||||||
| 40 | Up to 500 | 20 to 500 | 30 | 27 | 60 | 22 | 44 | 16 | 32 | 10 | 15 | 8 | M8 × 1.25 | 14 | 11 | M14 × 1.5 |
| 50 | Up to 600 | 20 to 600 | 35 | 32 | 70 | 27 | 52 | 20 | 40 | 10 | 17 | 11 | M8 × 1.25 | 18 | 11 | M18 × 1.5 |
| 63 | Up to 600 | 20 to 600 | 35 | 32 | 85 | 27 | 64 | 20 | 40 | 10 | 17 | 11 | M10 × 1.25 | 18 | 14 | M18 × 1.5 |
(Units: mm)
| Tube inner diameter (mm) | N | P | S | Without rod boot | With bellows | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| H | ZZ | d | e | f | h | L | ZZ | ||||
| 40 | 27 | 1/4 | 84 | 51 | 146 | 56 | 43 | 11.2 | 59 | 1/4 stroke | 154 |
| 50 | 30 | 3/8 | 90 | 58 | 159 | 64 | 52 | 11.2 | 66 | 1/4 stroke | 167 |
| 63 | 31 | 3/8 | 98 | 58 | 170 | 64 | 52 | 11.2 | 66 | 1/4 stroke | 178 |
- * Please refer to the catalog as the external dimensions of the accessories (options) for each mounting support type are the same as the standard type / double moving piece rod.
Notes
Minimum Stroke for Auto Switch Mounting
- *The minimum stroke for mounting varies with the auto switch type and cylinder mounting type. In particular, the center trunnion type requires careful attention. (Refer to the catalog for details.)
Usage Precautions
- * Avoid using it to give rotational torque to the piston rod. The detent guide will be deformed and the non-rotation accuracy will increase. Also, when screwing the nut into the threaded part at the tip of the piston rod, make sure that the piston rod is pulled in to the final end and hook the spanner on the part that protrudes from the parallel part of the rod.
At this time, be careful not to apply the tightening torque to the detent guide when tightening.
Correct installation drawing
Wrong installation drawing
Disassembly/Replacement
- * To replace the rod packing, please contact our manufacturer's support center. Air leakage may occur depending on the position where the rod packing is installed. please contact our support center when replacing it.
Do not replace the detent guide. The detent guide is press-fitted, so when replacing it, replace it with the cover assembly.
Other
- * Please be sure to check "safety precautions", "actuators / common precautions" and "auto switch / common precautions" in the catalog before use.
- *Product images are representative models.
- *See the SMC catalog for information other than that detailed above.
■Made to Order Specifications: Please refer to the following for details on changing the mounting position of the trunnion bracket.
Part Number
|
|---|
| CA2KG40-160 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Cylinder (Tube) Inner Diameter (Ø) | Stroke (mm) | Cushion | Specifications | Port thread type | Auto Switch | Lead Wire Length (m) | Number of Switches | Type of Mount Support | Bellows | Connector type | Type | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
193.47 € | 1 | 46 Days | 40 | 160 | Air cushion | Without magnet | Rc | - | - | - | Head-end flange | None | - | - |
Loading...
Basic information
| Cylinder Operation Method | Double Acting | Rod Operation Method | Single Rods | Main Body Shape | Standard |
|---|---|---|---|---|---|
| Additional Function | With rod detent function | Environment, Applications | Standard | Operating Pressure(MPa) | 0.05 to 1.0 |
| Custom-made Specifications | None |
This page is Air Cylinder, Non-Rotating Rod Type: Double Acting, Single Rod CA2K Series, part number CA2KG40-160.
You can find the detail information about specifications and dimensions on part number CA2KG40-160.
Configure
Basic Attributes
-
Auto Switch
-
Lead Wire Length(m)
- 0.5 (M12 4-pin A-cord [normal-key] plug connector)
- 3
- 5
-
Number of Switches
-
Connector type
- None
-
Type
-
Type
- CA2K
- CDA2K
-
Cylinder (Tube) Inner Diameter(Ø)
-
Stroke(mm)
-
Cushion
- Air cushion
- Without cushion
-
Specifications
- Built-in magnet
- Without magnet
-
Port thread type
- G
- NPT
- Rc
-
Type of Mount Support
- Axial foot type
- Basic type
- Center trunnion type
- Head-end flange
- Rod-end flange type
- Single clevis
- U-Shaped Clevis Type
-
Bellows
-
Filter by CAD data type
- 2D
- 3D
Filter by standard shipping days
-
- All
- 17 Days or Less
- 28 Days or Less
- 45 Days or Less
- 46 Days or Less
- 50 Days or Less
- 51 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Variation of this product
| Part Number |
|---|
| CA2KB40-175 |
| CA2KB40-25 |
| CA2KB40-250 |
| CA2KG50-10 |
| CA2KG50-150N |
| CA2KL40-200 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | Cylinder (Tube) Inner Diameter (Ø) | Stroke (mm) | Cushion | Specifications | Port thread type | Auto Switch | Lead Wire Length (m) | Number of Switches | Type of Mount Support | Bellows | Connector type | Type |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
182.68 € | 1 | 51 Days | 40 | 175 | Air cushion | Without magnet | Rc | - | - | - | Basic type | None | - | - | ||
156.89 € | 1 | 51 Days | 40 | 25 | Air cushion | Without magnet | Rc | - | - | - | Basic type | None | - | - | ||
195.60 € | 1 | 46 Days | 40 | 250 | Air cushion | Without magnet | Rc | - | - | - | Basic type | None | - | - | ||
220.37 € | 1 | 17 Days | 50 | 10 | Air cushion | Without magnet | Rc | - | - | - | Head-end flange | None | - | - | ||
257.94 € | 1 | 46 Days | 50 | 150 | Without cushion | Without magnet | Rc | - | - | - | Head-end flange | None | - | - | ||
197.77 € | 1 | 51 Days | 40 | 200 | Air cushion | Without magnet | Rc | - | - | - | Axial foot type | None | - | - |
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.