Rotary Actuator, Vane Type, CRB2 Series (CRB2FS15-270SZ)
- Promotional pricing
Product Details:
Manufacturer part number: CRB2FS15-270SZ
Brand: SMC
Price: 167.61 €
Delivery time: 26 Days
Technical Data:
Type: Axis output of rotary actuator on one side
Angle of Oscillation A: 270°
Torque: Less than 1 N▪m
Operation Method: Single vane
Tube Nominal Diameter: 15
(i)Remark
- Refer to the catalog for details on product specifications.
- Product images may be representative. Refer to the manufacturer's catalog for details.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
CRB2FS15-270SZ
Rotary Actuator, Vane Type, CRB2 Series Features
Single Vane Specifications
| Size | 10 | 15 | 20 | 30 | 40 | |
|---|---|---|---|---|---|---|
| Rotating angle | 90°, 180°, 270 ° | |||||
| Fluid | Air (non-lube) | |||||
| Proof pressure (MPa) | 1.05 | 1.5 | ||||
| Ambient and fluid temperature | 5 to 60°C | |||||
| Max. operating pressure (MPa) | 0.7 | 1.0 | ||||
| Min. operating pressure (MPa) | 0.2 | 0.15 | ||||
| Rotation time adjustment range (s/90)°*1 | 0.03 to 0.3 | 0.04 to 0.3 | 0.07 to 0.5 | |||
| Allowable kinetic energy (J)*2 | 0.00015 | 0.001 | 0.003 | 0.02 | 0.04 | |
| 0.00025 | 0.0004 | 0.015 | 0.03 | |||
| Shaft load (N) | Allowable radial load | 15 | 15 | 25 | 30 | 60 |
| Allowable thrust load | 10 | 10 | 20 | 25 | 40 | |
| Port location | Side ported or Axial ported | |||||
| Port size (side ported, axial ported) | M3 × 0.5 | M5 × 0.8 | ||||
| Angle adjustable range*3 | 0 to 230 ° | 0 to 240 ° | 0 to 230 ° | |||
- *1Make sure to operate within the speed regulation range. Exceeding the maximum speed (0.3 s/90°) can cause the unit to stick or not operate.
For size 10, when operation at the maximum speed (0.03 s/90°) is required, the operating pressure should be set to 0.35 MPa or higher. - *2The upper numbers in this section in the table indicate the energy factor when the rubber bumper is used (at the end of the rotation), and the lower numbers indicate the energy factor when the rubber bumper is not used.
- *3Adjustment range in the table is for 270°. For 90° and 180°, refer to the manufacturer's catalog.
Double Vane Specifications
| Size | 10 | 15 | 20 | 30 | 40 | |
|---|---|---|---|---|---|---|
| Rotating angle | 90°, 100 ° | |||||
| Fluid | Air (non-lube) | |||||
| Proof pressure (MPa) | 1.05 | 1.5 | ||||
| Ambient and fluid temperature | 5 to 0°C | |||||
| Max. operating pressure (MPa) | 0.7 | 1.0 | ||||
| Min. operating pressure (MPa) | 0.2 | 0.15 | ||||
| Rotation time adjustment range (s/90)°*1 | 0.03 to 0.3 | 0.04 to 0.3 | 0.07 to 0.5 | |||
| Allowable kinetic energy J | 0.0003 | 0.0012 | 0.0033 | 0.02 | 0.04 | |
| Shaft load (N) | Allowable radial load | 15 | 15 | 25 | 30 | 60 |
| Allowable thrust load | 10 | 10 | 20 | 25 | 40 | |
| Port location | Side ported or Axial ported | |||||
| Port size (side ported, axial ported) | M3 × 0.5 | M5 × 0.8 | ||||
| Angle adjustable range*2 | 0 to 90 ° | |||||
- *1Make sure to operate within the speed regulation range. Exceeding the maximum speed (0.3 s/90°) can cause the unit to stick or not operate.
For size 10, when operation at the maximum speed (0.03 s/90°) is required, the operating pressure should be set to 0.35 MPa or higher. - *2Adjustment range in the table is for 100°. For 90°, see the manufacturer's catalog.
External dimensional drawing
- *For single vane type, the following figures show actuators for 90° and 180° when B port is pressurized.
- *For double vane type, the following figures show the intermediate rotation position when A or B port is pressurized.
(Unit: mm)
Single shaft / Port location: side ported
(Unit: mm)
Double shaft / Port location: side ported
(Unit: mm)
Shaft-end shape of size 40
(Unit: mm)
Single shaft / Port location: side ported
(Unit: mm)
Size 10 (port location: side ported)
(Unit: mm)
Size 10, 15, 20, 30, 40 (port location: axial ported)
(Unit: mm)
| Size | A | B | C | D | E (g7) | F (h9) | G1 | G2 | J | K | L | M | N | P |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 10 | 29 | 15 | 8 | 14 | 4 (-0.016 to -0.004) | 9 (-0.036 to 0) | 3 | 1 | 5 | 9 | 0.5 | 9.5 | 9.5 | 24 |
| 15 | 34 | 20 | 9 | 18 | 5 (-0.016 to -0.004) | 12 (-0.043 to 0) | 4 | 1.5 | 6 | 10 | 0.5 | 14 | 10 | 29 |
| 20 | 42 | 29 | 10 | 20 | 6 (-0.016 to -0.004) | 14 (-0.043 to 0) | 4.5 | 1.5 | 7 | 10 | 0.5 | 20 | 13 | 36 |
| 30 | 50 | 40 | 13 | 22 | 8 (-0.020 to -0.005) | 16 (-0.043 to 0) | 5 | 2 | 8 | 12 | 1.0 | 26 | 14 | 43 |
| 40 | 63 | 45 | 15 | 30 | 10 (-0.020 to -0.005) | 25 (-0.052 to 0) | 6.5 | 4.5 | 9 | 20 | 1.0 | 31 | 20 | 56 |
| Size | Q | R | S | T | V1 | V2 | W | X | Y | ||
|---|---|---|---|---|---|---|---|---|---|---|---|
| ◆ Q1 | ◆ Q2 | ★ Q3 | |||||||||
| 10 | M3 × 0.5 depth 6 | 6 | - | M3 × 0.5 | 14 | 3.6 | 30 | 37 | 19.8 | 8.5 | 14.5 |
| 15 | M3 × 0.5 depth 6 | 6 | M3 × 0.5 depth 5 | M3 × 0.5 | 19 | 7.6 | 39.5 | 47 | 21 | 11 | 17 |
| 20 | M4 × 0.7 depth 13.5 | 11 | M4 × 0.7 depth 7.5 | M5 × 0.8 | 24.5 | 10.5 | 50.5 | 59 | 22 | 14 | 21 |
| 30 | M5 × 0.8 depth 18 | 16.5 | M5 × 0.8 depth 10 | M5 × 0.8 | 34.5 | 14 | 64 | 75 | 24 | 15.5 | 25 |
| 40 | M5 × 0.8 depth 16 | 17.5 | M5 × 0.8 depth 10 | M5 × 0.8 | 39.8 | 17 | 79.5 | 90 | 30 | 21 | 31.6 |
External dimensional drawing: standard type 10 (double vane type)
- The following figures show the intermediate rotation position when A or B port is pressurized.
(Unit: mm)
Single shaft / Port location: side ported
(Unit: mm)
Double shaft / Port location: side ported
(Unit: mm)
(Port location: axial ported)
- *Refer to the manufacturer's catalog for other models' dimensions, specifications, etc.
Part Number
|
|---|
| CRB2FS15-270SZ |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Type | Angle of Oscillation A | Torque (N▪m) | Operation Method | Tube Nominal Diameter | Allowable Kinetic Energy (J) | Allowable Kinetic Energy (J) | Operating Pressure Range (MPa) | Connection port location | Switch | Lead wire (m) | Number of switches | Shaft pattern | Axial direction | Made to order specifications | Mounting style | Connector type | Specifications | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
167.61 € | 1 | 26 Days | Axis output of rotary actuator on one side | 270° | Less than 1 | Single vane | 15 | Less than 0.005 | 0.001 | 0.15～0.7 | Body side surface | None | None | None | Long shaft: single flat | Standard | None | Flange type | None | Standard type |
Loading...
Basic information
| Main Body Shape | Round shape | Usage Environment/Application | Standard | Rigidity and accuracy | Standard |
|---|---|---|---|---|---|
| Valve | Not Provided |
Configure
Basic Attributes
-
Type
- CDRB2B□
- CDRB2F□
- CRB2B□
- CRB2F□
-
Type
- Axis output of rotary actuator on one side
- Axis output of rotary actuator on both sides
-
Angle of Oscillation A
- 90°
- 100°
- 180°
- 270°
- 90°
-
Torque(N▪m)
- Less than 1
- 1 to Less Than 3
- 3 to Less than 6
- 6 to Less Than 10
- 10 to Less Than 20
-
Operation Method
- Single vane
- Double Vane
-
Tube Nominal Diameter
-
Allowable Kinetic Energy(J)
- Less than 0.005
- 0.01 to Less Than 0.1
-
Allowable Kinetic Energy(J)
-
Connection port location
- Body axial direction
- Body side surface
-
Switch
-
Lead wire(m)
- 0.5
- 1
- 3
- 5
- None
-
Number of switches
-
Shaft pattern
-
Axial direction
- Standard
- Top (long shaft side)
-
Made to order specifications
- Change the rotation range
- Change the screw position
- Fluorine grease
- Machined keyway
- None
- Threaded through-hole
-
Mounting style
- Basic type
- Flange type
-
Connector type
- M8 3-pin
- None
-
Specifications
- Standard type
- With auto switch unit
-
Filter by CAD data type
- 2D
- 3D
Filter by standard shipping days
-
- All
- Same day
- 3 Days or Less
- 4 Days or Less
- 22 Days or Less
- 26 Days or Less
- 39 Days or Less
- 86 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.