Refrigerated Air Dryer Standard Temperature Air Inlet, IDF□E Series (Part Numbers - CAD Download)
Refrigerated air dryer with improved corrosion resistance due to the use of a stainless-steel heat exchanger.
[Features]
· Protects pneumatic equipment from moisture.
· Removes the vapor from the moist compressed air delivered by the compressor, and prevents it from causing the pneumatic equipment to fail.
· Air flow capacity increased up to 40%.
· Power consumption reduced up to 40%.
· Energy-saving design.
· Exhaust heat reduced by 25%, controlling increases in ambient temperature (air-cooled specification) and reducing heat discharging water amount (water-cooled specification).
· Inlet air temperature: 35°C (22E, 37E) / 40°C (55E, 75E).
· Outlet air pressure dew point: 10°C.
[Features]
· Protects pneumatic equipment from moisture.
· Removes the vapor from the moist compressed air delivered by the compressor, and prevents it from causing the pneumatic equipment to fail.
· Air flow capacity increased up to 40%.
· Power consumption reduced up to 40%.
· Energy-saving design.
· Exhaust heat reduced by 25%, controlling increases in ambient temperature (air-cooled specification) and reducing heat discharging water amount (water-cooled specification).
· Inlet air temperature: 35°C (22E, 37E) / 40°C (55E, 75E).
· Outlet air pressure dew point: 10°C.
(i)Remark
- ■ SMC Product Line
Webpages for products currently without individual pages on this site will be released on an ad-hoc basis.
■ Products Planned for Online Release
Air cylinder-related product pages will be released on this site on an ad-hoc basis.
CQ2/MG types, etc., are already available.
*Vacuum equipment, FRLs, solenoid valves, etc., will also be released on dedicated pages on this site on an ad-hoc basis.
*The information above is correct as of December 2018. - See catalog for specification details.
- Product images may be representative images. Refer to the manufacturer's catalog for shape details.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
IDF37E-20-L
Basic information
| Type | Dryer | Method | Refrigerating type (air-cooling specification) | Shape | Standard |
|---|---|---|---|---|---|
| Air Inlet Flow Rate [Distinction](l/min) | More than 5000 | Air Inlet Flow(l/min) | 6,100 / 5,700 | Exit Air Atmospheric Pressure Dew Point(°C) | 10 |
| Supply Side, Connection Type | R | Air Temperature at the Inlet Port(°C) | 35 | Air Pressure at the Inlet Port Side(MPa) | 0.7 |
| Supply Side, Nominal Designation of Piping Thread | 1 1/2 | Control Side Connection Types | R | Control SideNominal Pipe Threads | 1 1/2 |
| Power Supply Voltage | Single-phase: 200 V AC (50 Hz), 200/220 V AC (60 Hz) | Specifications | None | Air Compressor Size | 37 kW |
| Auto drain | With heavy-duty auto drain | For Compressed Air Cooling | None | Copper Tube Anti-rust Processing | None |
| Leakage Circuit Breaker | None | Operation, Terminal block for abnormal signal takeout | None | Chinese nameplate, Chinese operation manual | None |
This page is Refrigerated Air Dryer Standard Temperature Air Inlet, IDF□E Series, part number IDF37E-20-L.
You can find the detail information about specifications and dimensions on part number IDF37E-20-L.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.