Electric Actuator Slider Type Ball Screw Drive LEFS Series Step Motor/Servo Motor
·Easy to install the main body / reduce installation man-hours
The main body can be installed without removing exterior parts such as covers.
·Table position can be detected by auto switch
·Up to 4 locations can be attached to both sides of the body
·Ball screw drive
(i)Remark
- ■ SMC Air Cylinder Product Selection and Technical Information
Please check the special page from here.
■About SMC product handling
products without a web page will be released one by one.
If you have a fixed model number, please request a quote / order from here. - Refer to the manufacturer's catalog for specification and material details.
- Product images may be representative images only. Please refer to the manufacturer's catalog for shape details.
- CAD data is not available for some model numbers.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
Part Number
|
|---|
| LEFS16A-100-R3CL18 |
| LEFS16A-200-R3CL18 |
| LEFS16A-200B-R3CL18 |
| LEFS25A-100B-R5CL18 |
| LEFS25A-600-S3CL17 |
| LEFS25RA-150-R5CL18 |
| LEFS32RB-1000-R1CL18 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Stroke (mm) | Max. Transportable Mass Range (Horizontal) (kg) | Max. Transportable Mass (Horizontal) (kg) | Max. Transportable Mass Range (Vertical) (kg) | Max. Transportable Mass (Vertical) (kg) | Lead (mm) | I/O Module | Table Width W1 (mm) | Brake | Max. Thrust Force Range (N) | Max. Thrust Force (N) | Noise Filters | Table Length L1 (mm) | Positioning Repeatability (µm) | Maximum Velocity (mm/sec) | Size | Accuracy | Motor type | Motor mounting position | Motor options | Actuator/cable type | Actuator cable length (m) | Controller/driver type | I/O cable length / communication plug (m) | Controller/driver mounting method | Grease application (Seal band part) | Auto switch mounting bracket | Positioning pin hole | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1,648.30 € | 1 | 26 Days | 100 | 10.1 to 20.0 | 14 | 0 to 2.0 | 2 | 10 | IO-Link | 39.4 | Not Provided | 101 to 200 | 137.2 | Not Provided | 72 | ±20 | 700 | 16 | Basic Type | Step motor | In-line | Without lock | Robot cable | 3 | JXCL1 (IO-link direct input) | Without plug connector | DIN rail mounting type | Yes | None | Bottom of housing B | ||
1,685.56 € | 1 | 26 Days | 200 | 10.1 to 20.0 | 14 | 0 to 2.0 | 2 | 10 | IO-Link | 39.4 | Not Provided | 101 to 200 | 137.2 | Not Provided | 72 | ±20 | 700 | 16 | Basic Type | Step motor | In-line | Without lock | Robot cable | 3 | JXCL1 (IO-link direct input) | Without plug connector | DIN rail mounting type | Yes | None | Bottom of housing B | ||
1,979.49 € | 1 | 26 Days | 200 | 10.1 to 20.0 | 14 | 0 to 2.0 | 2 | 10 | IO-Link | 39.4 | Provided | 101 to 200 | 137.2 | Not Provided | 72 | ±20 | 700 | 16 | Basic Type | Step motor | In-line | With lock | Robot cable | 3 | JXCL1 (IO-link direct input) | Without plug connector | DIN rail mounting type | Yes | None | Bottom of housing B | ||
2,059.60 € | 1 | 26 Days | 100 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | IO-Link | 50 | Provided | 201 to 300 | 245 | Not Provided | 102 | ±20 | 750 | 25 | Basic Type | Step motor | In-line | With lock | Robot cable | 5 | JXCL1 (IO-link direct input) | Without plug connector | DIN rail mounting type | Yes | None | Bottom of housing B | ||
1,814.16 € | 1 | 26 Days | 600 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | IO-Link | 50 | Not Provided | 201 to 300 | 245 | Not Provided | 102 | ±20 | 540 | 25 | Basic Type | Step motor | In-line | Without lock | Standard cable | 3 | JXCL1 (IO-link direct input) | Without plug connector | Screw mounting type | Yes | None | Bottom of housing B | ||
1,826.61 € | 1 | 26 Days | 150 | 20.1 to 50.0 | 25 | 5.1 to 10.0 | 7.5 | 12 | IO-Link | 50 | Not Provided | 201 to 300 | 245 | Not Provided | 102 | ±20 | 750 | 25 | Basic Type | Step motor | Right side parallel | Without lock | Robot cable | 5 | JXCL1 (IO-link direct input) | Without plug connector | DIN rail mounting type | Yes | None | Bottom of housing B | ||
2,355.67 € | 1 | 26 Days | 1,000 | 20.1 to 50.0 | 50 | 10.1 to 20.0 | 20 | 8 | IO-Link | 60 | Not Provided | 301 to 500 | 490 | Not Provided | 122 | ±20 | 170 | 32 | Basic Type | Step motor | Right side parallel | Without lock | Robot cable | 1.5 | JXCL1 (IO-link direct input) | Without plug connector | DIN rail mounting type | Yes | None | Bottom of housing B |
Loading...
Basic information
| Main Body, Peripheral Components | Main Body | Type | Sliders | Drive Method | Rolled Ball Screw |
|---|---|---|---|---|---|
| Guide | Provided | Input Power Supply | 24 V DC | Position Detection | Incremental |
| Usage Environment | Standard | Operating Temperature Range(°C) | 5::40 |
Configure
Basic Attributes
-
Stroke(mm)
-
Max. Transportable Mass Range (Horizontal)(kg)
- 2.1 to 5.0
- 5.1 to 10.0
- 10.1 to 20.0
- 20.1 to 50.0
- 50.1 to 100.0
-
Max. Transportable Mass (Horizontal)(kg)
-
Max. Transportable Mass Range (Vertical)(kg)
- 0 to 2.0
- 2.1 to 5.0
- 5.1 to 10.0
- 10.1 to 20.0
- 20.1 to 50.0
-
Max. Transportable Mass (Vertical)(kg)
-
Lead(mm)
-
Table Width W1(mm)
-
Brake
- Not Provided
- Provided
-
Max. Thrust Force Range(N)
- 0 to 100
- 101 to 200
- 201 to 300
- 301 to 500
- 501 to 1000
-
Max. Thrust Force(N)
-
Noise Filters
- Not Provided
- Provided
-
Table Length L1(mm)
-
Positioning Repeatability(µm)
-
Maximum Velocity(mm/sec)
-
Size
- 16
- 25
- 32
- 40
-
Accuracy
- Basic Type
- High Precision Type
-
Motor type
- Servo Motor
- Step motor
-
Motor mounting position
- In-line
- Left side parallel
- Right side parallel
-
Motor options
- With lock
- Without lock
-
Actuator/cable type
-
Actuator cable length(m)
- 1.5
- 3
- 5
- 8
- 10
- 15
- 20
-
Controller/driver type
- JXCD1 (DeviceNet (TM) direct input)
- JXCE1 (EtherCAT direct input)
- JXCL1 (IO-link direct input)
- JXCP1 (PROFINET direct input)
- LECP1 (programless type)
- LECA6 (Step data input type)
- LECP6 (Step data input type)
- JXC91 (EtherNet/IP direct input)
- LECPA (pulse input type)
- Without controller/driver
-
I/O cable length / communication plug(m)
-
Controller/driver mounting method
- DIN rail mounting type
- Screw mounting type
-
Grease application (Seal band part)
- None (Roller specifications)
- Yes
-
Auto switch mounting bracket
- 1 pc. included (Include)
- None
-
Positioning pin hole
- 2 places on the bottom of the body
- Bottom of housing B
-
Type
- LEFS
-
I/O Module
- NPN
- PNP
- DeviceNet
- Ethernet
- Not Provided
- EtherCAT
- IO-Link
- PROFINET
-
Filter by CAD data type
- 2D
- 3D
Filter by standard shipping days
-
- All
- 4 Days or Less
- 7 Days or Less
- 9 Days or Less
- 26 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.