Ball runner blocks / Steel / SLS / R1623
- Volume Discount
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
Standard BSHP ball runner block made of steel
Definition of the format of ball runner blocks
| Criterion | Designation | Code (example) | ||
| F | N | S | ||
| Width | Flange (F) | F | ||
| Slimline (S) | S | |||
| Wide (B) | B | |||
| Compact (C) | C | |||
| Length | Normal (N) | N | ||
| Long (L) | L | |||
| Short (K) | K | |||
| Height | Standard height (S) | S | ||
| High (H) | H | |||
| Low (N) | N | |||
SLS – Slimline, long, standard height R1623 ... 2.
Features and Ordering
Dynamic characteristics
Travel speed: vmax = 5 m/s
Acceleration: amax = 500 m/s2
(If Fcomb > 2.8 · Fpr : amax = 50 m/s2)
Note on lubrication
▶ Pre-lubricated
Note
Can be used on all SNS/SNO ball guide rails.
Ball runner blocks of size 55 and size 65 can be found in chapter “Heavy-duty ball runner block BSHP made of steel” after this chapter.
Options and material numbers
| Size | Ball runner blocks with size | Preload class | Accuracy class | Seals on ball runner blocks | |||||||||||
| without ball chain | with ball chain | ||||||||||||||
| C0 | C1 | C2 | C3 | N | H | P | XP | SS | LS1) | DS | SS | LS1) | DS | ||
| 15 | R1623 1 | 9 | 4 | 3 | – | – | 20 | 21 | – | 22 | 23 | – | |||
| 1 | 4 | 3 | 2 | 8 | 20 | 21 | 2Z | 22 | 23 | 2Y | |||||
| 2 | – | 3 | 2 | 8 | 20 | 21 | 2Z | 22 | 23 | 2Y | |||||
| 3 | – | – | – | 8 | 20 | 21 | 2Z | 22 | 23 | 2Y | |||||
| 20 | R1623 8 | 9 | 4 | 3 | – | – | 20 | 21 | – | 22 | 23 | – | |||
| 1 | 4 | 3 | 2 | 8 | 20 | 21 | 2Z | 22 | 23 | 2Y | |||||
| 2 | – | 3 | 2 | 8 | 20 | 21 | 2Z | 22 | 23 | 2Y | |||||
| 3 | – | – | – | 8 | 20 | 21 | 2Z | 22 | 23 | 2Y | |||||
| 25 | R1623 2 | 9 | 4 | 3 | – | – | 20 | 21 | – | 22 | 23 | – | |||
| 1 | 4 | 3 | 2 | 8 | 20 | 21 | 2Z | 22 | 23 | 2Y | |||||
| 2 | – | 3 | 2 | 8 | 20 | 21 | 2Z | 22 | 23 | 2Y | |||||
| 3 | – | – | – | 8 | 20 | 21 | 2Z | 22 | 23 | 2Y | |||||
| 30 | R1623 7 | 9 | 4 | 3 | – | – | 20 | 21 | – | 22 | 23 | – | |||
| 1 | 4 | 3 | 2 | 8 | 20 | 21 | 2Z | 22 | 23 | 2Y | |||||
| 2 | – | 3 | 2 | 8 | 20 | 21 | 2Z | 22 | 23 | 2Y | |||||
| 3 | – | – | – | 8 | 20 | 21 | 2Z | 22 | 23 | 2Y | |||||
| 35 | R1623 3 | 9 | 4 | 3 | – | – | 20 | 21 | – | 22 | 23 | – | |||
| 1 | 4 | 3 | 2 | 8 | 20 | 21 | 2Z | 22 | 23 | 2Y | |||||
| 2 | – | 3 | 2 | 8 | 20 | 21 | 2Z | 22 | 23 | 2Y | |||||
| 3 | – | – | – | 8 | 20 | 21 | 2Z | 22 | 23 | 2Y | |||||
| 45 | R1623 4 | 9 | 4 | 3 | – | – | 20 | – | – | 22 | – | – | |||
| 1 | 4 | 3 | 2 | 8 | 20 | – | 2Z | 22 | – | 2Y | |||||
| 2 | – | 3 | 2 | 8 | 20 | – | 2Z | 22 | – | 2Y | |||||
| 3 | – | – | – | 8 | 20 | – | 2Z | 22 | – | 2Y | |||||
| E.g.: | R1623 7 | 1 | 3 | 20 | |||||||||||
1) Only for accuracy classes N and H and for XP in preload class C1.
C0 = Without preload (clearance)
C1 = Moderate preload
C2 = Average preload
C3 = High preload
SS = Standard seal
LS = Low-friction seal
DS = Double-lip seal
gray numbers = No preferred variant / combination
(partially longer delivery times)
Ordering example
Options:
▶ Ball runner blocks SLS
▶ Size 30
▶ Preload class C1
▶ Accuracy class H
▶ With standard seal, without ball chain
Material number: R1623 713 20
Drawing and Specifications
|
| |
| a) For O-ring Size 15: Ø 4 · 1.0 (mm) Size 20 – 45: Ø 5 · 1.0 (mm) Open lube port if necessary (see section entitled “Lubrication”). b) Lube nipple, size 15 – 20: Funnel-type lube nipple DIN 3405-A, M3x5, B2 = 1.6 mm When using different lube nipples, pay attention to the screw-in depth of 5 mm! Lube nipple, size 25 – 45: Hydraulic-type lube nipple DIN 71412-A M6x8, B2 = 9.5 mm When using different lube nipples, pay attention to the screw-in depth of 8 mm! The lube nipple is included in the scope of delivery (not installed). Connection is possible on all sides. | ||
| Size | Dimensions (mm) | |||||||||||||||||
| A | A1 | A2 | A3 | B+0.5 | B1 | E1 | E2 | E8 | E9 | H | H1 | H21) | H22) | K1 | K2 | K3 | K4 | |
| 15 | 34 | 17 | 15 | 9.5 | 72.6 | 53.6 | 26 | 26 | 24.55 | 6.70 | 24 | 19.90 | 16.30 | 16.20 | 17.20 | 18.80 | 3.20 | 3.20 |
| 20 | 44 | 22 | 20 | 12.0 | 91.0 | 65.6 | 32 | 50 | 32.50 | 7.30 | 30 | 25.35 | 20.75 | 20.55 | 14.80 | 14.80 | 3.35 | 3.35 |
| 25 | 48 | 24 | 23 | 12.5 | 107.9 | 79.5 | 35 | 50 | 38.30 | 11.50 | 36 | 29.90 | 24.45 | 24.25 | 20.80 | 21.95 | 5.50 | 5.50 |
| 30 | 60 | 30 | 28 | 16.0 | 119.7 | 89.4 | 40 | 60 | 48.40 | 14.60 | 42 | 35.35 | 28.55 | 28.35 | 21.00 | 22.70 | 6.05 | 6.05 |
| 35 | 70 | 35 | 34 | 18.0 | 139.0 | 105.5 | 50 | 72 | 58.00 | 17.35 | 48 | 40.40 | 32.15 | 31.85 | 23.75 | 25.25 | 6.90 | 6.90 |
| 45 | 86 | 43 | 45 | 20.5 | 174.1 | 133.5 | 60 | 80 | 69.80 | 20.90 | 60 | 50.30 | 40.15 | 39.85 | 35.50 | 37.50 | 8.20 | 8.20 |
| Size | Dimensions (mm) | Mass (kg) | Load capacities3) (N) | Load moments3) (Nm) | ||||||||||
|
|
| ||||||||||||
| N3 | N6±0.5 | S2 | S5 | S9 | T | V1 | m | C | C0 | Mt | Mt0 | ML | ML0 | |
| 15 | 6.0 | 10.3 | M4 | 4.5 | M2.5x3.5 | 60 | 5.0 | 0.20 | 12800 | 18400 | 120 | 180 | 120 | 180 |
| 20 | 7.5 | 13.2 | M5 | 6.0 | M3x5 | 60 | 6.0 | 0.45 | 29600 | 41800 | 380 | 540 | 340 | 490 |
| 25 | 9.0 | 15.2 | M6 | 7.0 | M3x5 | 60 | 7.5 | 0.65 | 37300 | 52500 | 530 | 750 | 530 | 740 |
| 30 | 12.0 | 17.0 | M8 | 9.0 | M3x5 | 80 | 7.0 | 1.10 | 46000 | 66900 | 800 | 1160 | 740 | 1080 |
| 35 | 13.0 | 20.5 | M8 | 9.0 | M3x5 | 80 | 8.0 | 1.70 | 66700 | 116000 | 1440 | 2500 | 1290 | 2240 |
| 45 | 18.0 | 23.5 | M10 | 14.0 | M4x7 | 105 | 10.0 | 3.20 | 111000 | 190000 | 3010 | 5120 | 2730 | 4660 |
1) Dimension H2 with cover strip
2) Dimension H2 without cover strip
3) Load ratings and load moments for ball runner block without ball chain. Load ratings and load moments for ball runner block with ball chain Page.12
Determination of the dynamic load capacities and load moments is based on a stroke travel of 100,000 m according to DIN ISO 14728-1.
Often only 50,000 m are actually stipulated. For comparison: Multiply the values C, Mt and ML by 1.26 according to the table.
Part Number
|
|---|
| R162319420 |
| R162329420 |
| R162339420 |
| R162349420 |
| R162379420 |
| R162389420 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Rail Width (mm) | Mounting Height H (mm) | Preload | Accuracy | Nominal Part Number | Basic Load Rating: Dynamic Load (N) | Basic Load Rating: Static Load (N) | Allowable Static Moment MA (Nm) | Allowable Static Moment MB (Nm) | Allowable Static Moment MC (Nm) | T Dimension (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
91.93 € | 1 | Available | 70 Days | 15 | 24 | Clearance | Normal Grade (normal) | 15 | 16128 | 23184 | 227 | 227 | 227 | 60 | |
122.54 € | 1 | Available | 70 Days | 23 | 36 | Clearance | Normal Grade (normal) | 25 | 46998 | 66150 | 945 | 945 | 932 | 60 | |
146.39 € | 1 | Available | 70 Days | 34 | 48 | Clearance | Normal Grade (normal) | 35 | 84042 | 146160 | 3150 | 3150 | 2822 | 80 | |
184.35 € | 1 | Available | 70 Days | 45 | 60 | Clearance | Normal Grade (normal) | 45 | 139860 | 239400 | 6451 | 6451 | 5872 | 105 | |
135.81 € | 1 | Available | 70 Days | 28 | 42 | Clearance | Normal Grade (normal) | 30 | 57960 | 84294 | 1462 | 1462 | 1361 | 80 | |
124.55 € | 1 | Available | 70 Days | 20 | 30 | Clearance | Normal Grade (normal) | 20 | 37296 | 52668 | 680 | 680 | 617 | 60 |
Loading...
Basic information
| Set / Single Item | Block only | Block Type | SLS - Slimline, long, standard height | Rail Type | standard Rail |
|---|---|---|---|---|---|
| No. of Blocks | 1 | Material | Carbon steel | Ball Arrangement | Medium, Heavy Load Type |
| Retainer | Not provided | Lubrication Type | Lubrication Impregnated | Rolling Element | Ball |
| Lubrication Type | Lithium based grease filled | Seal Type | Standard seal |
Configure
Basic Attributes
-
Rail Width(mm)
-
Mounting Height H(mm)
-
Accuracy
- Normal Grade (normal)
- High Grade (high)
-
Nominal Part Number
-
T Dimension(mm)
-
Type
- R1623
-
Preload
- Light Preload
- Medium Preload
- Clearance
- Light Preload
-
Filter by CAD data type
- 3D
Filter by standard shipping days
-
- All
- 70 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.