FCC-K Model Chassis Reinforcement Fixture【2 Pieces Per Package】
[Features]
· Used as a reinforcing fixture for the central part of the chassis when placing a load on the chassis.
· Boring holes (2-φ3.5) into the chassis and panel side is necessary when mounting to a chassis.
· The positioning can be adjusted as required by changing the hole boring position.
· If the chassis mounting fitting FCK-1 is used, please use the FCC-K-1 fixture.
· If the chassis mounting fitting FCK-2 is used, please use the FCC-K-2 fixture.
· Used as a reinforcing fixture for the central part of the chassis when placing a load on the chassis.
· Boring holes (2-φ3.5) into the chassis and panel side is necessary when mounting to a chassis.
· The positioning can be adjusted as required by changing the hole boring position.
· If the chassis mounting fitting FCK-1 is used, please use the FCC-K-1 fixture.
· If the chassis mounting fitting FCK-2 is used, please use the FCC-K-2 fixture.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
Loading...
Basic information
| Type | Dedicated Accessory | Note | Cannot be used for FCS○-○-38 series. |
|---|
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.