Lock-Tight Aluminum Double Clamp Vise
- Volume Discount
Two workpieces can be clamped at the same time with one vise to shorten working time. The movable part and fixed jaw are made from aluminum, and thus lightweight. Therefore, cut the soft clamp yourself before use. The movable part can be attached and detached with one touch. The main body is made of ductile cast iron with flame quenching on the sliding surface, allowing it to be used as a single clamp type by replacing with the supplied parts.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
LTAW100
Basic information
| Mouth Width(mm) | 101 | Mouth Depth(mm) | 32 | Maximum Opening(mm) | 38(178) |
|---|---|---|---|---|---|
| Standard guide block width(mm) | 18 | Tightening Force(kN) | 15 | Mass(kg) | 14.7 |
| A(mm) | 385 | B(mm) | 57 | C(mm) | 104 |
| D(mm) | 101 | E(mm) | 32 | F(mm) | 102 |
| G(mm) | 38 | H(mm) | 12 | I(mm) | 6 |
| J(mm) | 18 | K(mm) | 7 | L(mm) | 75.5 |
| M(mm) | 192.5 | N(mm) | 75.5 | O(mm) | 6 |
| P | 14 | Q | M8 | R(mm) | 178 |
| S(mm) | 183.5 | Accessory | 1 set of standard guide blocks (2 pcs per set), 1 handle, 1 set of parts for center vise |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.