Point Tap Series, V Coating, Long Shank, V-LT-POT

Point Tap Series, V Coating, Long Shank, V-LT-POT
Compatible with a wide range of materials - soft materials to hard materials. Displays particularly good performance in tapping under high speed, highly dilution (water soluble cutting fluid) conditions. Also Effective For Dry-Tapping

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

V-LT-POT-OH2-M4X0.7X100

Part Number
V-LT-POT-OH2-M4X0.7X100
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
Nominal Pitch, Number of Threading
(mm)
Work material Length under neck
(mm)
Shank diameter
(mm)
Thread Length
(mm)
Protrusion Tool No.

27.47 €

1 6 Days M40.7Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]21513-8316213

Loading...

  1. 1

Basic information

Screw Types Meter Chamfer threads 5P Tool Material Type Vanadium high-speed steel
Tap Type Point tap Hole type For through hole Coating Y/N Available
Coating Type TiCN L(mm) 100 Accuracy OH2
Number of Grooves 3

This page is Point Tap Series, V Coating, Long Shank, V-LT-POT, part number V-LT-POT-OH2-M4X0.7X100.
You can find the detail information about specifications and dimensions on part number V-LT-POT-OH2-M4X0.7X100.

Variation of this product

Part Number
V-LT-POT-OH2-M6X1X100
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountStandard
Shipping Days
?
Nominal Pitch, Number of Threading
(mm)
Work material Length under neck
(mm)
Shank diameter
(mm)
Thread Length
(mm)
Protrusion Tool No.

23.17 €

1 6 Days M61Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◯] / Titanium Alloy (Ti-6Al-4V, etc)[◯] / Magnesium Alloy (MC)[◯] / Zinc Alloy Casting (ZDC)[◯] / Aluminum Rolled Material (AL)[◯] / Aluminum Alloy Casting (AC, ADC)[◯] / Brass cast iron (BsC)[◯] / Bronze (Pb)[◯] / Copper (Cu)[◯] / Brass (Bs)[◯] / Ductile Cast Iron (FCD)[◎] / Tool Steel (Before SKD Hardening)[◯] / Steel casting (SC)[◎]29619Available8316219

Tech Support