- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 3:00 to 15:00 (CEST) 16/6/2024. We apologize for the inconvenience.
C-CTE2000 UT Coated 2-Flute Tapered (Part Numbers)
· 2-flute taper end mill with extensive variations from taper half angle of 30' to 15°
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
C-CTE2004-3
Part Number
|
|---|
| C-CTE2004-3 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Single corner (θ) (Degree) | Tip diameter (D) (φ) | Blade length (l) (mm) | Shank diameter (d) (mm) | Overall Length (L) (mm) | Large End Diameter φD' (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|
133.87 € | 1 | 6 Days | 1.5 | 0.4 | 1.6 | 3 | 38 | 0.48 |
Loading...
Basic information
| Type | Tapered square | work material | General steel / Quenched and tempered steel / High hardness steel –HRC55 / Stainless Steel / Cast Iron / Copper | Number of flutes(sheet) | 2 |
|---|---|---|---|---|---|
| Coating | TiCN | Torsional Angle | With torsion |
This page is C-CTE2000 UT Coated 2-Flute Tapered, part number C-CTE2004-3.
You can find the detail information about specifications and dimensions on part number C-CTE2004-3.
Configure
Basic Attributes
-
Type
- C-CTE2000
-
Single corner (θ)(Degree)
-
Tip diameter (D)(φ)
-
Blade length (l)(mm)
-
Shank diameter (d)(mm)
-
Overall Length (L)(mm)
Filter by standard shipping days
-
- All
- 6 Days or Less
- 8 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Variation of this product
| Part Number |
|---|
| C-CTE2002-2 |
| C-CTE2002-20 |
| C-CTE2002-3 |
| C-CTE2004-4 |
| C-CTE2004-6 |
| C-CTE2004-8 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | Single corner (θ) (Degree) | Tip diameter (D) (φ) | Blade length (l) (mm) | Shank diameter (d) (mm) | Overall Length (L) (mm) | Large End Diameter φD' (mm) |
|---|---|---|---|---|---|---|---|---|---|---|
159.96 € | 1 | 8 Days | 1 | 0.2 | 0.8 | 3 | 38 | 0.23 | ||
226.69 € | 1 | 8 Days | 10 | 0.2 | 0.8 | 3 | 38 | 0.48 | ||
159.96 € | 1 | 6 Days | 1.5 | 0.2 | 0.8 | 3 | 38 | 0.24 | ||
133.87 € | 1 | 8 Days | 2 | 0.4 | 1.6 | 3 | 38 | 0.51 | ||
133.87 € | 1 | 8 Days | 3 | 0.4 | 1.6 | 3 | 38 | 0.57 | ||
144.51 € | 1 | 6 Days | 4 | 0.4 | 1.6 | 3 | 38 | 0.62 |
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.