C-CTE4000 UT Coated 4-Flute Tapered (Part Numbers)
· Taper end mill with extensive variations from taper half angle of 30' to 7°
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
C-CTE4040-2
Part Number
|
|---|
| C-CTE4040-2 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Single corner (θ) (Degree) | Tip diameter (D) (φ) | Blade length (l) (mm) | Shank diameter (d) (mm) | Overall Length (L) (mm) | Large End Diameter φD' (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|
115.33 € | 1 | 8 Days | 1 | 4 | 15 | 6 | 50 | 4.52 |
Loading...
Basic information
| Type | Tapered square | work material | General steel / Quenched and tempered steel / High hardness steel –HRC55 / Stainless Steel / Cast Iron / Copper | Number of flutes(sheet) | 4 |
|---|---|---|---|---|---|
| Coating | TiCN | Torsional Angle | 30° twist |
This page is C-CTE4000 UT Coated 4-Flute Tapered, part number C-CTE4040-2.
You can find the detail information about specifications and dimensions on part number C-CTE4040-2.
Configure
Basic Attributes
-
Type
- C-CTE4000
-
Single corner (θ)(Degree)
-
Tip diameter (D)(φ)
-
Blade length (l)(mm)
-
Shank diameter (d)(mm)
-
Overall Length (L)(mm)
Filter by standard shipping days
-
- All
- 6 Days or Less
- 8 Days or Less
- 11 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Variation of this product
| Part Number |
|---|
| C-CTE4030-2 |
| C-CTE4030-3 |
| C-CTE4030-4 |
| C-CTE4040-3 |
| C-CTE4040-4 |
| C-CTE4040-5 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | Single corner (θ) (Degree) | Tip diameter (D) (φ) | Blade length (l) (mm) | Shank diameter (d) (mm) | Overall Length (L) (mm) | Large End Diameter φD' (mm) |
|---|---|---|---|---|---|---|---|---|---|---|
111.36 € | 1 | 6 Days | 1 | 3 | 10 | 6 | 50 | 3.35 | ||
111.36 € | 1 | 6 Days | 1.5 | 3 | 10 | 6 | 50 | 3.52 | ||
111.36 € | 1 | 6 Days | 2 | 3 | 10 | 6 | 50 | 3.7 | ||
115.33 € | 1 | 6 Days | 1.5 | 4 | 15 | 6 | 50 | 4.79 | ||
115.33 € | 1 | 6 Days | 2 | 4 | 15 | 6 | 50 | 5.05 | ||
115.33 € | 1 | 6 Days | 2.5 | 4 | 15 | 6 | 50 | 5.31 |
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.