Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
2TE-1-20
Part Number
|
---|
2TE-1-20 |
Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Tip diameter (D) (φ) | Single corner (θ) (Degree) | Blade length (l) (mm) | Shank diameter (d) (mm) | Overall Length (L) (mm) | Largest End Diameter (D1) (mm) | |
---|---|---|---|---|---|---|---|---|---|---|
291.89 € | 1 | 6 Days | 20 | 1° | 100 | 20 | 200 | 23.49 |
Loading...
Type | Tapered square | work material | General Steel / Cast Iron / Aluminum / Resin | Number of flutes(sheet) | 2 |
---|---|---|---|---|---|
Torsional Angle | Weak torsion (15˚ to 25˚) | Coating | Non-Coated | Tip diameter tolerance(mm) | 0~-0.05 |
Angle Tolerance(Minute) | ±5' | Center Hole | None |
This page is Taper End Mill 2 Flutes, part number 2TE-1-20.
You can find the detail information about specifications and dimensions on part number 2TE-1-20.
Configure
Basic Attributes
Type
Tip diameter (D)(φ)
Single corner (θ)(Degree)
Blade length (l)(mm)
Shank diameter (d)(mm)
Overall Length (L)(mm)
Largest End Diameter (D1)(mm)
Filter by standard shipping days
Optional Attributes
Part Number |
---|
2TE-0.5-2 |
2TE-0.5-20 |
2TE-0.5-25 |
2TE-1-25 |
2TE-1-3 |
2TE-1-4 |
Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | Tip diameter (D) (φ) | Single corner (θ) (Degree) | Blade length (l) (mm) | Shank diameter (d) (mm) | Overall Length (L) (mm) | Largest End Diameter (D1) (mm) |
---|---|---|---|---|---|---|---|---|---|---|
73.83 € | 1 | 6 Days | 2 | 0°30' | 10 | 6 | 59 | 2.18 | ||
236.77 € | 1 | 6 Days | 20 | 0°30' | 100 | 20 | 200 | 21.75 | ||
294.98 € | 1 | 6 Days | 25 | 0°30' | 100 | 25 | 200 | 26.75 | ||
448.64 € | 1 | 6 Days | 25 | 1° | 100 | 25 | 200 | 28.49 | ||
73.83 € | 1 | 6 Days | 3 | 1° | 15 | 6 | 61 | 3.52 | ||
73.83 € | 1 | 6 Days | 4 | 1° | 20 | 6 | 66 | 4.69 |