Taper End Mill 2 Flutes (2TE-7-10)
- Volume Discount
Product Details:
Manufacturer part number: 2TE-7-10
Brand: FUKUDA
Price: 225.02 €
Delivery time: 6 Days
Technical Data:
Tip diameter (D): 10 φ
Single corner (θ): 7° Degree
Blade length (l): 60 mm
Shank diameter (d): 20 mm
Overall Length (L): 130 mm
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
2TE-7-10
Part Number
|
|---|
| 2TE-7-10 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Tip diameter (D) (φ) | Single corner (θ) (Degree) | Blade length (l) (mm) | Shank diameter (d) (mm) | Overall Length (L) (mm) | Largest End Diameter (D1) (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|
225.02 € | 1 | 6 Days | 10 | 7° | 60 | 20 | 130 | 24.73 |
Loading...
Basic information
| Type | Tapered square | work material | General Steel / Cast Iron / Aluminum / Resin | Number of flutes(sheet) | 2 |
|---|---|---|---|---|---|
| Torsional Angle | Weak torsion (15˚ to 25˚) | Coating | Non-Coated | Tip diameter tolerance(mm) | 0～-0.05 |
| Angle Tolerance(Minute) | ±5' | Center Hole | None |
This page is Taper End Mill 2 Flutes, part number 2TE-7-10.
You can find the detail information about specifications and dimensions on part number 2TE-7-10.
Configure
Basic Attributes
-
Type
- 2TE
-
Tip diameter (D)(φ)
-
Single corner (θ)(Degree)
-
Blade length (l)(mm)
-
Shank diameter (d)(mm)
-
Overall Length (L)(mm)
-
Largest End Diameter (D1)(mm)
- 2.18
- 2.35
- 2.52
- 2.7
- 2.87
- 3.05
- 3.26
- 3.4
- 3.52
- 3.75
- 3.79
- 4.05
- 4.1
- 4.31
- 4.35
- 4.46
- 4.57
- 4.69
- 4.81
- 5.05
- 5.09
- 5.4
- 5.44
- 5.53
- 5.75
- 5.87
- 6.1
- 6.31
- 6.52
- 6.75
- 6.79
- 7.04
- 7.18
- 7.37
- 7.57
- 7.62
- 8.09
- 8.26
- 8.49
- 8.62
- 8.7
- 9.13
- 9.14
- 9.24
- 9.39
- 10.03
- 10.09
- 10.19
- 10.31
- 10.79
- 10.87
- 11.12
- 11.36
- 11.49
- 11.74
- 11.81
- 12.19
- 12.36
- 12.43
- 12.62
- 12.99
- 13.04
- 13.49
- 13.59
- 14.09
- 14.37
- 14.41
- 14.58
- 14.84
- 15.14
- 15.24
- 15.82
- 16.19
- 16.39
- 16.74
- 16.99
- 17.24
- 17.34
- 17.4
- 18.29
- 18.51
- 18.79
- 20.1
- 20.19
- 20.27
- 20.39
- 20.49
- 21.19
- 21.59
- 21.75
- 22.05
- 22.49
- 22.61
- 22.99
- 23.49
- 23.75
- 24.38
- 24.61
- 24.73
- 25.24
- 25.63
- 25.83
- 26.73
- 26.75
- 26.86
- 26.98
- 27.18
- 27.43
- 28.49
- 28.73
- 28.86
- 29.99
- 30.24
- 30.47
- 30.48
- 31.16
- 31.98
- 32.81
- 33.16
- 33.73
- 33.98
- 34.79
- 35.11
- 35.48
- 35.65
- 37.49
- 38.48
- 38.98
- 41.02
- 42.15
- 42.49
- 44.15
- 44.21
- 44.39
- 44.55
- 46.02
- 48.11
- 49.55
- 53.11
- 53.67
- 55.26
- 55.67
- 58.87
- 60.26
- 62.63
- 73.59
- 73.73
- 74.23
- 75.96
- 77.73
- 92.79
Filter by standard shipping days
-
- All
- Same day
- 6 Days or Less
- 7 Days or Less
- 10 Days or Less
- 11 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Variation of this product
| Part Number |
|---|
| 2TE-0.5-2 |
| 2TE-0.5-20 |
| 2TE-0.5-25 |
| 2TE-7-12 |
| 2TE-7-16 |
| 2TE-7-2 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | Tip diameter (D) (φ) | Single corner (θ) (Degree) | Blade length (l) (mm) | Shank diameter (d) (mm) | Overall Length (L) (mm) | Largest End Diameter (D1) (mm) |
|---|---|---|---|---|---|---|---|---|---|---|
73.83 € | 1 | 6 Days | 2 | 0°30' | 10 | 6 | 59 | 2.18 | ||
236.77 € | 1 | 6 Days | 20 | 0°30' | 100 | 20 | 200 | 21.75 | ||
294.98 € | 1 | 6 Days | 25 | 0°30' | 100 | 25 | 200 | 26.75 | ||
378.75 € | 1 | 6 Days | 12 | 7° | 60 | 25 | 130 | 26.73 | ||
667.55 € | 1 | 6 Days | 16 | 7° | 80 | 32 | 170 | 35.65 | ||
97.71 € | 1 | 6 Days | 2 | 7° | 10 | 6 | 59 | 4.46 |
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.