Center Reamer (Taper Shank)
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
Part Number
|
|---|
| CR-MT-60-40 |
| CR-MT-60-50 |
| CR-MT-60-60 |
| CR-MT-60-80 |
| CR-MT-60-100 |
| CR-MT-90-40 |
| CR-MT-90-50 |
| CR-MT-90-60 |
| CR-MT-90-80 |
| CR-MT-90-100 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Tip angle (θ) | Number of flutes (sheet) | Overall Length (L) (mm) | Shank diameter (d) | Tip diameter | Blade length (ℓ) | Outer Diameter (D) | Outer Diameter Length (ℓ1) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
277.92 € | 1 | 6 Days | 60 | 9 | 133 | MT2 | 6 | 29.5 | 40 | 13.5 | ||
496.18 € | 1 | 6 Days | 60 | 9 | 145 | MT2 | 7 | 37.2 | 50 | 15.8 | ||
688.40 € | 1 | 6 Days | 60 | 11 | 155 | MT2 | 10 | 43.3 | 60 | 16.7 | ||
1,378.45 € | 1 | 6 Days | 60 | 13 | 193 | MT3 | 10 | 60.6 | 80 | 18.4 | ||
2,206.34 € | 1 | 6 Days | 60 | 15 | 216 | MT3 | 10 | 77.9 | 100 | 24.1 | ||
249.16 € | 1 | 6 Days | 90 | 9 | 121 | MT2 | 6 | 17 | 40 | 14 | ||
442.14 € | 1 | 6 Days | 90 | 9 | 130 | MT2 | 7 | 21.5 | 50 | 16.5 | ||
660.40 € | 1 | 6 Days | 90 | 11 | 136.5 | MT2 | 10 | 25 | 60 | 16.5 | ||
1,157.98 € | 1 | 6 Days | 90 | 13 | 168 | MT3 | 10 | 35 | 80 | 19 | ||
1,875.83 € | 1 | 6 Days | 90 | 15 | 183 | MT3 | 10 | 45 | 100 | 24 |
Loading...
Basic information
| Application | Hole Chamfer | work material | General Steel / Cast Iron / Aluminum / Resin | Single blade, two blades | Single blade |
|---|---|---|---|---|---|
| Peripheral Blade Y/N | N/A | Tool Material Type | High-speed steel (SKH51) | Coating Y/N | N/A |
| Coating Type | Non-Coated | shank | MT | Large diameter tolerance | +0.3～+0.5 |
| Angle Tolerance(Minute) | ±15' |
Configure
Basic Attributes
-
Tip angle (θ)
-
Number of flutes(sheet)
- 9
- 11
- 13
- 15
-
Overall Length (L)(mm)
-
Shank diameter (d)
-
Tip diameter
-
Blade length (ℓ)
-
Outer Diameter (D)
-
Outer Diameter Length (ℓ1)
-
Type
- CR-MT
Filter by standard shipping days
-
- All
- 6 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.