Clash Cut for Light Use
Light steel beam type has been added to Clash Cut.
[Features]
· The front surface is rough-side finished and thus there will be few burrs or scales on the cutting surface as well as almost no clogging.
· Grinding stone suitable for cutting light roofing materials.
· Set of 5 units suitable for easy portability to work sites.
[Features]
· The front surface is rough-side finished and thus there will be few burrs or scales on the cutting surface as well as almost no clogging.
· Grinding stone suitable for cutting light roofing materials.
· Set of 5 units suitable for easy portability to work sites.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
JCT35525AZ36T5
Basic information
| Product Type | Flat | Work material | General steel / Stainless Steel / Alloy Steel / Cast Iron | Abrasive material | AZ |
|---|---|---|---|---|---|
| Particle Size(#) | 36 | Hardness | T | Outer Diameter(mm) | 355 |
| Blade thickness(mm) | 2.5 | Internal Diameter(mm) | 25.4 | Features | Durability emphasized |
| Peripheral Speed (Maximum Peripheral Velocity Used)(m/s) | 80 | Number Contained In A Packet(Sheets) | 5 | Features 1 | The front surface is rough-side finished and thus there will be few burrs or scales on the cutting surface as well as almost no clogging. |
| Features 2 | Grinding stone suitable for cutting light roofing materials. | Features 3 | Set of 5 units for easy portability to work sites. | Application | Cutting of Light Roofing Material (Construction Steel Ceiling Bases · Building Steel Wall Bases) |
| Point Strategy | 5 points |
This page is Clash Cut for Light Use, part number JCT35525AZ36T5.
You can find the detail information about specifications and dimensions on part number JCT35525AZ36T5.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.