Rolling Center 100 With Stickers
· Small accessory cutting adequate products, -17A is a fine type and suitable for thread cutting and end surface processing.
· 3 bearing including 2 needle bearings and 1 thrust bearing are used inside this product, and the main body diameter is designed to be small.
· As the head part of the main body is within 60 degrees from the center end tip, there is no interference for progress of the tool bit.
· V seal is adopted and suitable when cutting oil is used.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
Part Number
|
|---|
| R104-301 |
| R104-302 |
| R104-317 |
| R104-321 |
| R104-322 |
| R104-327 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Shank MT No | Tip Carbide Insert (Y/N) | Type | A (mm) | B (mm) | B1 (mm) | C (mm) | C1 (mm) | D (mm) | E (mm) | e (mm) | L (mm) | Carbide Diameter | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
588.40 € | 1 | 8 Days | MT4 | N/A | Seal 104 A | 45 | 30 | 18 | 108.5 | 5.3 | 52 | 33 | - | 193.5 | - | ||
588.40 € | 1 | 8 Days | MT4 | N/A | Seal 104 B | 45 | 30 | - | 108.5 | 5.3 | 52 | 33 | - | 193.5 | - | ||
661.02 € | 1 | 8 Days | MT4 | N/A | Seal 104-17A | 45 | 30 | 12 | 108.5 | 5.3 | 52 | 45.5 | 20 | 206 | - | ||
847.20 € | 1 | 8 Days | MT4 | Yes | Seal 104A, with Carbide | 45 | 30 | 18 | 108.5 | 5.3 | 52 | 33 | - | 193.5 | 10 | ||
885.01 € | 1 | 8 Days | MT4 | Yes | Seal 104B, with Carbide | 45 | 30 | - | 108.5 | 5.3 | 52 | 33 | - | 193.5 | 14 | ||
878.75 € | 1 | 8 Days | MT4 | Yes | Seal 104-17A, with Carbide | 45 | 30 | 12 | 108.5 | 5.3 | 52 | 45.5 | 20 | 206 | 10 |
Loading...
Basic information
| Type | Rotation Center / Lathe Center | Features | -17A is a thin type and is ideal for thread cutting and end face processing. This machine is designed with a small body diameter, and uses two needle bearings and three thrust bearings. Since the body head is within an angle of 60° from the tip of the center, it does not interfere on the entry of the cutting tool. It has V seal and is ideal for the use of cutting oil. | Deflection of Center (Max.) | TIR0.005 |
|---|
Configure
Basic Attributes
-
Tip Carbide Insert (Y/N)
- Yes
- N/A
-
Type
-
A(mm)
-
B(mm)
-
B1(mm)
-
C(mm)
-
C1(mm)
-
D(mm)
-
E(mm)
-
e(mm)
- 20
- -
-
L(mm)
-
Type
- R102
- R103
- R104
- R105
-
Shank MT No
Filter by standard shipping days
-
- All
- 8 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.