Polygon Band Mini (Part Numbers)
Click on this image to zoom in.
Click on this image to zoom in.
● Very fast since the micro flap works on a line and the polygon band mini works on a surface.
● Post-use dust is surprisingly minimal compared to micro flaps, and can easily remove small whiskers and burrs from small holes.
● Easily performs hairline finishing on iron, aluminum and stainless steel.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
PGBM1520-180
Part Number
|
|---|
| PGBM1520-180 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Particle Size (#) | Max. Rotational Speed (min-1(r.p.m)) | Internal Diameter (mm) | Trusco Code | Order Code | |
|---|---|---|---|---|---|---|---|---|---|
5.63 € | 10 | 6 Days | 180 | 20000 | 15 | 409-1302 | 468-27785 |
Loading...
Basic information
| Application | Polishing | Type | Flap with shaft | Width(mm) | 20 |
|---|---|---|---|---|---|
| Application | Deburring after drilling; fine adjustment of inner diameters etc. and inner surface polishing of curved surfaces and pipes etc.; weld bead removal; removal of rust caused by machinery maintenance, etc. for sputtering equipment; paint peeling, finishing work, and deburring after cutting, etc.; and hairline, etc. order finishing as a substitute for work done using a grinding wheel with a shaft or a carbide bar, such as aluminum casting parting line removal, and deburring, etc. | Caution | * Never use beyond the maximum usage rotation number. * Be sure to insert the red finished surface of the mini polygon band facing in front of the drum shaft before use. * Please securely affix the dedicated drum shaft by inserting the rotation tool (grinder, drill, etc.) 2/3 of the shaft length. * When performing polishing work, please wear protective glasses, a dust mask, gloves, and a hat. * Please store away from direct sunlight, extreme aridity, and/or high humidity conditions. * Please read the handling instructions for the disk grinder to be used, and use only upon confirming that the product is in compliance. | Abrasive material | A |
| Features | Micro Flap works linearly while Polygon Band Mini works on a plane, which makes it extremely fast. Reduces work time to 1/5. Produces surprisingly little waste after use compared to Micro Flap. Reduces waste volume to 1/5. Small-hole bearded needle can be easily removed. A hairline finish can easily be applied to iron, aluminum and stainless steel. |
This page is Polygon Band Mini, part number PGBM1520-180.
You can find the detail information about specifications and dimensions on part number PGBM1520-180.
Configure
Basic Attributes
-
Type
- PGBM
-
Particle Size(#)
-
Max. Rotational Speed(min-1(r.p.m))
-
Internal Diameter(mm)
-
Trusco Code
-
Order Code
Filter by standard shipping days
-
- All
- 6 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Variation of this product
| Part Number |
|---|
| PGBM1020-240 |
| PGBM1020-320 |
| PGBM1020-400 |
| PGBM1520-240 |
| PGBM1520-320 |
| PGBM1520-400 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | Particle Size (#) | Max. Rotational Speed (min-1(r.p.m)) | Internal Diameter (mm) | Trusco Code | Order Code |
|---|---|---|---|---|---|---|---|---|---|
5.62 € | 10 | 6 Days | 240 | 25000 | 10 | 409-1167 | 468-27636 | ||
5.62 € | 10 | 6 Days | 320 | 25000 | 10 | 409-1175 | 468-27645 | ||
5.62 € | 10 | 6 Days | 400 | 25000 | 10 | 409-1183 | 468-27654 | ||
5.63 € | 10 | 6 Days | 240 | 20000 | 15 | 409-1311 | 468-27794 | ||
5.63 € | 10 | 6 Days | 320 | 20000 | 15 | 409-1329 | 468-27803 | ||
4.51 € | 10 | 6 Days | 400 | 20000 | 15 | 409-1337 | 468-27812 |
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.