Tool Setter i
Blade position with cutting tool diameter of φ0.05 mm can be detected. Machine-mounted tool length measurement instrument for high-speed spindle type machining center.
[Features]
· Developed for machining centers with ceramic spindles.
· Can also be used for non-conductive workpieces because of the internal contact system.
· Uses scratch-resistant ceramic for the cutting edge detection part. High-luminosity LED (blue) notifies the user of position detection.
· A magnet is attached to the bottom to support both vertical and horizontal use.
[Features]
· Developed for machining centers with ceramic spindles.
· Can also be used for non-conductive workpieces because of the internal contact system.
· Uses scratch-resistant ceramic for the cutting edge detection part. High-luminosity LED (blue) notifies the user of position detection.
· A magnet is attached to the bottom to support both vertical and horizontal use.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
I-50
Basic information
| Product Category | Measuring equipment | Main Body Dimensions(mm) | φ40×50 | Main Body Dimension Tolerance(mm) | 0～+0.005 |
|---|---|---|---|---|---|
| Mass(g) | 200 | Applicable Product | For Small Diameter Drills / End Mills | Method | Internal contact type |
| Measured pressure | 0.2N | Repeat accuracy | ±0.001mm | Battery (included) | Silver Oxide Battery SR-44 x 2 |
| Minimum Width of Measurement Tool | φ0.05-φ6 mm supported | Sensor Plate | Alumina Oxide Ceramic | Stroke(mm) | 1.5 |
| Magnetization force | 6N | LED | High Luminosity, Blue | Contact Pressure | 0.2N |
| Note | Use the NS Tool Setter M-50 for cutting tools that are larger than the area of the measuring surface (φ6). |
This page is Tool Setter i, part number I-50.
You can find the detail information about specifications and dimensions on part number I-50.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.