Boring Tool Bit, CoroTurn 111, Screw Clamp, F...-SDUPR / L-ER (Part Numbers)
A dedicated solid carbide reinforced boring bar for boring deep holes. Features a built-in dampening device which absorbs cutting vibrations originating from the tool in the bit.
The cutting vibration dampening capability of the bit's dampening device significantly improves the dynamic rigidity of the dampened bit. With regular steel boring bits, the length of the protruding section is limited to being 4 times that of the tool diameter, but with this solid-carbide bit that length is extended to approximately 10 times the tool diameter.
The EasyFix sleeve allows for quick and accurate center height adjustment.
For inner-diameter turning (bore cutting) operations with longer protrusions.
For suppressing chattering.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
F10MSDUPR07ER
Part Number
|
|---|
| F10MSDUPR07ER |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Minimum Machining Diameter | Cutting Direction | Overall Length L1 | Shank diameter | Protrusion length (L/D) | Dimensions f1 (mm) | Blade Inclination Angle λs (°) | Dimensions l4 (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
687.52 € | 1 | 12 Days | 15 | Right-hand | 150 | 10 | 60–100 | 9 | -3 | 60 |
Loading...
Basic information
| Applicable Tip Shape | D (55° Diamond-Shape) | Application | Internal Diameter / Inner diameter profiling | Clamp Shape | Screw Clamp |
|---|---|---|---|---|---|
| Clearance angle | 11° | Lubrication Hole Y/N | N/A | Specifications | CORO-TURN 111 Screw Clamp With Cylindrical Shank, Easy Fix and Groove for Sleeve |
| Torque(Nm) | 0.9 | Cutting Angle(°) | 93 | Tool Lead Angle(°) | -3 |
| Tip Size(mm) | 7 | Rake angle γ(°) | 0 | Gauge Chip | DPMT 07 02 04 |
This page is Boring Tool Bit, CoroTurn 111, Screw Clamp, F...-SDUPR / L-ER, part number F10MSDUPR07ER.
You can find the detail information about specifications and dimensions on part number F10MSDUPR07ER.
Configure
Basic Attributes
-
Type
- F-SDUPR/L-ER
-
Minimum Machining Diameter
-
Cutting Direction
- Right-hand
- Left-hand
-
Overall Length L1
-
Shank diameter
-
Protrusion length (L/D)
-
Dimensions f1(mm)
Filter by standard shipping days
-
- All
- 6 Days or Less
- 12 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Variation of this product
| Part Number |
|---|
| F10M-SDUPL07-ER |
| F12Q-SDUPL07-ER |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | Minimum Machining Diameter | Cutting Direction | Overall Length L1 | Shank diameter | Protrusion length (L/D) | Dimensions f1 (mm) | Blade Inclination Angle λs (°) | Dimensions l4 (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
665.46 € | 1 | 6 Days | 15 | Left-hand | 150 | 10 | 100 | 9 | -3 | 60 | ||
782.12 € | 1 | 6 Days | 18 | Left-hand | 180 | 12 | 120 | 11 | -1 | 72 |
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.