Shank Tool Bit T-Max P Lever Clamp PCLNR / L
[Features]
The number-one recommended turning tool for rough outer-diameter cutting and finishing. For use with negative inserts, and, as it features a center hole, it allows for speedy and accurate indexing.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.
The number-one recommended turning tool for rough outer-diameter cutting and finishing. For use with negative inserts, and, as it features a center hole, it allows for speedy and accurate indexing.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
PCLNR2020K09
Basic information
| Applicable Tip Shape | C (80° Diamond-Shape) | Application | Outer Diameter / End Face / Profiling / Chamfer | Clamp Shape | Lever lock |
|---|---|---|---|---|---|
| Cutting Direction | Right-hand | Applicable Tip Clearance Angle Type | Negative | Shank height(mm) | 20 |
| Shank width(mm) | 20 | Rake angle(°) | -6 | Blade Inclination Angle(°) | -6 |
| Lead Angle(°) | -5 | Cutting Angle(°) | 95 | Clearance angle(°) | 0 |
| Function Width(mm) | 25 | Function Height(mm) | 20 | Function Length(mm) | 125 |
| Dimension L3(mm) | 24.2 | Tip Size | 9 | iC | 3/8 |
| Gauge Chip | CNMG 09 03 08 |
This page is Shank Tool Bit T-Max P Lever Clamp PCLNR / L, part number PCLNR2020K09.
You can find the detail information about specifications and dimensions on part number PCLNR2020K09.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.