CoroMill Plura HD, Carbide Solid End Mill (with Square Center-Cut Oil Hole) (Part Numbers)
- Volume Discount
· Internal lubrication gives good chip discharge properties.
· Twice the cutting depth that was conventionally possible
· Ideal for everything from shoulder cutting to full grooving.
· With reinforced edge lines, assures long product life even with intense machining.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
2P342-1600-CMA-1740
Part Number
|
|---|
| 2P342-1600-CMA-1740 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Shank diameter (d) (mm) | Overall Length (L) (mm) | Usable length (mm) | Maximum Cutting (mm) | Corner Chamfer Width | |
|---|---|---|---|---|---|---|---|---|---|
446.98 € | 1 | 6 Days | 16 | 92 | 34.00 | 34.00 | 0.25mm |
Loading...
Basic information
| work material | Quenched and tempered steel / Stainless Steel | Number of flutes(sheet) | 4 | Type | Square |
|---|---|---|---|---|---|
| Torsion Angle (θ) | Standard Helix (30˚ to 40˚) | Shank diameter tolerance | h6 | Corner Chamfer | 45° |
| Maximum Ramping Angle(°) | 5 |
This page is CoroMill Plura HD, Carbide Solid End Mill (with Square Center-Cut Oil Hole), part number 2P342-1600-CMA-1740.
You can find the detail information about specifications and dimensions on part number 2P342-1600-CMA-1740.
Configure
Basic Attributes
-
Type
- 2P342-□-CMA-1740
-
Shank diameter (d)(mm)
-
Overall Length (L)(mm)
-
Usable length(mm)
-
Maximum Cutting(mm)
Filter by standard shipping days
-
- All
- 6 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Variation of this product
| Part Number |
|---|
| 2P342-0600-CMA-1740 |
| 2P342-0800-CMA-1740 |
| 2P342-1000-CMA-1740 |
| 2P342-1200-CMA-1740 |
| 2P342-2000-CMA-1740 |
| 2P342-2500-CMA-1740 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | Shank diameter (d) (mm) | Overall Length (L) (mm) | Usable length (mm) | Maximum Cutting (mm) | Corner Chamfer Width |
|---|---|---|---|---|---|---|---|---|---|
104.03 € | 1 | 6 Days | 6 | 57 | 13.00 | 13 | 0.10mm | ||
164.70 € | 1 | 6 Days | 8 | 63 | 18.00 | 18.00 | 0.10mm | ||
260.22 € | 1 | Available | 6 Days | 10 | 72 | 22.00 | 22 | 0.15mm | |
278.95 € | 1 | 6 Days | 12 | 83 | 26.00 | 26 | 0.15mm | ||
589.06 € | 1 | 6 Days | 20 | 104 | 42.00 | 42.00 | 0.25mm | ||
809.20 € | 1 | 6 Days | 25 | 121 | 52.00 | 52.00 | 0.25mm |
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.